RWD Catalogue

Available at Rollies Speed Shop – 07 3252 5381

Russ Wernimont Designs - Accessories

Part# RWD-0804-0247-RWD Profile Seat - Pre 2008 with RWD Tank

Custom seat to fit our 3" extended tank for 1996-2007 Baggers.

Made by Saddlemen™, these seats feature the soft leathery texture of SaddleHyde™. SaddleGel™ added for increased comfort during long rides. The Profile is a more pointed seat, while the Protour is a more rounded seat with fuller passenger seat area

Overall Length: 29-1/2 in.

       

Driver Seat

Length: 17-1/2 in. Width: 11-1/2 in. Backrest Height: 5 in. Passenger Seat Length: 12-1/2 in. Width: 6-1/2 in.

Part# RWD-0801-0508 - RWD Protour Seat - 2008-2010 with RWD Tank

Superior comfort in the ultimate low-profile, touring seat for two. The seat features a wide, supportive bucket seat for the driver, with a slim, contoured rear seat. Specially designed base allows the seat to drop down into the bike for the lowest riding position possible. Comfortable front seat is made with Saddlemen's famous combination of progressive density foam and SaddleGel™ in the driver's position, easing tailbone pressure and improving circulation for a smooth, comfortable ride.

Made with Saddlehyde.

Designed to fit with RWD's Gas Tanks for 2008- 2010

DIMENSIONS:

Overall Length: 29 in.

       

Driver Seat

Length: 17 in. Width: 14 in.

Backrest Height: 6 in.

Passenger Seat Length: 12 in. Width: 8-1/4 in

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs - Accessories

Part# RWD-0804-0248 - RWD Protour Seat - Pre 2008 with RWD Tank

Custom seat to fit our 3" extended tank for 1996-2007 Baggers.

Made by Saddlemen™, these seats feature the soft leathery texture of SaddleHyde™. SaddleGel™ added for increased comfort during long rides. The Profile is a more pointed seat, while the Protour is a more rounded seat with fuller passenger seat area.

DIMENSIONS:

Overall Length: 30 in.

       

Driver Seat

Length: 17-3/4 in.

Width: 11 in.

Backrest Height: 5 in. Passenger Seat Length: 12-1/4 in.

Width: 9 in.

Part# RWD-50050 - RWD Rocker Solo Seat

Superior comfort in the ultimate low-profile, solo seat.

The seat features a wide, supportive bucket seat for the driver. Specially designed base allows the seat to drop down into the bike for the lowest riding position possible. Comfortable seat is made with Saddlemen's famous combination of progressive density foam and SaddleGel™ easing tailbone pressure and improving circulation for a smooth, comfortable ride.

Fits with RWD Rocker Strutless rear fender

DIMENSIONS:

Overall Length: 19in.

    

Driver Seat

Length: 16-1/2 in. Width: 14-1/4 in. Backrest Height: 6 in

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs - Accessories

Part# RWD-50027 -RWD Threadless Pop-up Gas Cap/Adapter

Threadless pop-up Gas Cap/Adapter.

Measures 2-3/4" diameter x 1-1/4" high.

Protects Paint. Screws into stock Harley filler bung.

Comes in raw aluminum so it can be painted to match, or in chrome (Part# RWD-50035).

Not vented.

This gas cap is designed to be a sealed cap using an external tank vent.

Will not fit Sportsters.

Made in the USA.

Part# RWD-50029 - Seat - Big Seat - Softail 01-07 W/RWD Tank

Big Seat touring seats are low, wide and comfortable, with carefully designed contours, a fantastic looking frame-hugging profile. Superior comfort in the ultimate low-profile seat. Hand laid fiberglass seat pans provide strength, flexibility and conform to frame contours for low, lean look. Premium injected foam is process controlled to ensure proper comfort and support to the rider.

Not too hard or too soft as found in other competitor's seats.

Fine grain leather is used in seat surfaces, with premium grade vinyl used in side panels.

Fully felted bottom to protect painted

DIMENSIONS:

Overall Length: 18 in

   

Sitting Area Length: 12-1/2 in..

Width: 14 in

Backrest Height: 6-1/2 in

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs - Accessories

Part# RWD-2202-0119 - Low Profile Dash Replacement For 1996-2006 Road Kings®

Sleek low profile dash replaces the bulky stock dash on stock 1996-2006 Road Kings. Measures 19-1/4" Long x 5-1/2" Wide x 4-1/2" High. Material is polished cast aluminum. If your stock Bezel and Indicator do not fit in our dash, the you will need to purchase the Bezel and Indicator from Harley-Davidson. The part number for the Bezel is 68112-99, and the part number for the Indicator is 68113-99A. All parts must be prefitted before painting. Diamond Lower Leg and Axle covers. These Lower Leg and Axle covers not only cover the axle, but also cover the lower portion of the leg to clean up and improve the look of your stock lower legs. Hides all exposed axle mounting hardware. Cast aluminum, chrome finish. US Patent Pending. Fits stock Harley-Davidson legs with 3/4" or 1" axle. Does not fit Sportsters, V-Rods, or Deuces. Dimensions are 2-1/2" Deep x 2-3/4" Wide x 4" high.

Part# RWD-0214-0452 - Lower Leg and Axle Cover (Diamond)

Now Available!!

Part# RWD-0214-0451 - Lower Leg and Axle Cover (Smooth)

Smooth Lower Leg and Axle covers. These Lower Leg and Axle covers not only cover the axle, but also cover the lower portion of the leg to clean up and improve the look of your stock lower legs. Hides all exposed axle mounting hardware. Cast aluminum, chrome finish. US Patent Pending. Fits stock Harley-Davidson legs with 3/4" or 1" axle. Does not fit Sportsters, V-Rods, or Deuces. Dimensions are 2" Deep x 2-3/4" Wide x 4" high. Now available!!

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs - Accessories

Part# RWD-2202-0116 - Low Profile Dash For RWD 2001-2007 Softail® Tank

Sleek low profile dash fits RWD 2001-2007 Softail Tank. Measures 20" Long x 5-3/4" Wide x 5" High. Material is polished cast aluminum. All parts must be prefitted before painting.

Part# RWD-2202-0117 - Low Profile Dash Replacement For 1996-2006 Glides

Sleek low profile dash replaces the bulky stock dash on stock 1996-2007 Road Glides.

Measures 18-1/4" Long x 5-1/2" Wide x 4-1/4" High. Material is polished cast aluminum.

Part# RWD-2202-0118 - Low Profile Dash For 2001-2006 Softail® Tank

Sleek blow profile dash replaces the bulky stock dash on stock 2001-2006 Softails. Measures 18- 1/2" Long x 5-1/2" Wide x 5" High. Material is polished cast aluminum.

Part# RWD-0703-0113 -RWD Gas Cap - Flush Mount - Pop-up

Features a weld-in stainless steel bung with a pop-up aluminum gas cap.

Measures 2-3/8" diameter.

Not vented.

This gas cap is designed to be a sealed cap using an external tank vent.

Made in the USA

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Custom Front Fenders

Part# RWD-50049 Front 4-3/4" Fender for 19" Wheel for Rockers

Heavy 16 gauge steel construction. Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork.

Fenders come drilled and will need spacers.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate. Size Wheel

Part Number RWD-50049

4.75" Wide

19”

Part# RWD-DS-380469 Front Fender - Cobra

Heavy gauge steel construction.

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork.

Fenders come drilled.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate Size Wheel

Part Number

6.75" Wide

21”

RWD-DS- 380469 (DRILLED)

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Custom Front Fenders

Front Fender - Cruiser

Heavy gauge steel construction.

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come un-drilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate. Size Wheel

Part Number RWD-1401- 0026 RWD-1401- 0025

5.5" Wide

21”

6.25” Wide

16”-18”

Front Fender - Duster

Heavy gauge steel construction.

Most front fenders are available in three different widths (measured inside fender).

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come un-drilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate. Size Wheel

Part Number

4.75" Wide

19”/21”

RWD-DS- 380278 RWD-DS- 380493 RWD-DS- 380276

5.50” Wide

3 x 21”

6.25” Wide

16”

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Custom Front Fenders

Front Fender - Gambler

Heavy gauge steel construction.

Most front fenders are available in three different widths (measured inside fender).

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come un-drilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate Size Wheel

Part Number

4.75" Wide

19”/21”

RWD-DS- 380334 RWD-DS- 380491

5.50” Wide

3 x 21”

6.25” Wide

18”

RWD-1401- 0152

6.25” Wide

16”

RWD-DS- 380333

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Custom Front Fenders

Front Fender – Long OCF

Heavy gauge steel construction.

Most front fenders are available in three different widths (measured inside fender).

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come un-drilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate Size Wheel

Part Number RWD-1401- 0001 RWD-1401- 0283 RWD-1401- 0148 RWD-1401- 0243

4.50” Wide

21”

4.75” Wide

19”

5.5” Wide

21”

5.5” Wide Pre- Drilled for Baggers 5.5” Wide Pre- Drilled for Softails

21”

21”

RWD-1401- 0244

6.25” Wide

18”

RWD-1401- 0154 RWD-1401- 0155

6.25” Wide

18”

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Custom Front Fenders

Front Fender - Longshot

Heavy gauge steel construction.

Most front fenders are available in three different widths (measured inside fender).

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come un-drilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate Size Wheel

Part Number

4.75” Wide

19”

RWD-DS- 380370 RWD-DS- 380473 RWD-DS- 380492

4.75” Wide

21”

5.5” Wide

3 x 21”

6.25” Wide

18”

RWD-1401- 0151

6.25” Wide

16”

RWD-DS- 380372

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Custom Front Fenders

Front Fender - Maverick

Heavy gauge steel construction.

Most front fenders are available in three different widths (measured inside fender).

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come un-drilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate Size Wheel

Part Number

4.75" Wide

19”/21”

RWD-DS- 380279 RWD-DS- 380494 RWD-DS- 380277

5.50” Wide

3 x 21”

6.25” Wide

16”

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Custom Front Fenders

Front Fender - Outlaw

Heavy gauge steel construction.

Most front fenders are available in three different widths (measured inside fender).

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come un-drilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate Size Wheel

Part Number

4.75" Wide

19”/21”

RWD-DS- 380041 RWD-DS- 380488

5.5” Wide

3 x 21”

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Custom Front Fenders

Front Fender - Rambler

Heavy gauge steel construction.

Most front fenders are available in three different widths (measured inside fender).

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come un-drilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate Size Wheel

Part Number RWD-1925- 2757 RWD-1925- 2753

4.75” Wide

19”

4.75” Wide

21”

5.5” Wide

3 x 21”

RWD-DS- 380490

6.25” Wide

18”

RWD-1401- 0150 RWD-1925- 2755

6.25” Wide

16”

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Custom Front Fenders

Front Fender - Stinger

Heavy gauge steel construction.

Most front fenders are available in three different widths (measured inside fender).

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come un-drilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate Size Wheel

Part Number

4.75” Wide

19”

RWD-DS- 380371 RWD-DS- 380474 RWD-DS- 380495

4.75” Wide

21”

5.5” Wide

3 x 21”

6.25” Wide

18”

RWD-1401- 0153

6.25” Wide

16”

RWD-DS- 380369

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Custom Front Fenders

Front Fender - Stubby

Heavy gauge steel construction.

Most front fenders are available in three different widths (measured inside fender).

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come un-drilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate Size Wheel

Part Number RWD-1925- 2756 RWD-1925- 2752

4.75” Wide

19”

4.75” Wide

21”

5.5” Wide

3 x 21”

RWD-DS- 380489

6.25” Wide

18”

RWD-1401- 0149 RWD-1925- 2754

6.25” Wide

16”

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Flared Front Fenders

Front Fender - Front 5.5" OCF F/23" Wheel for Baggers

Heavy gauge steel construction.

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork.

Handmade in the USA.

All fenders must be prefitted before painting.

Spacers are required.

Comes undrilled.

Note: All measurements are approximate Size Wheel

Part Number RWD-50041

5.5" Wide for Baggers

23”

Front Fender - Flared Long

Heavy gauge steel construction.

Available in two widths (measured inside fender).

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork.

Pre-drilled.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate. Size Wheel

Part Number RWD-1401- 0170 RWD-1401- 01730 RWD-1401- 0206

4.5” Wide

21”

5.5” Wide

3 x 21”

5.5” Wide for Softails®

23”

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Flared Front Fenders

Front Fender – Flared Point

Heavy gauge steel construction.

Available in two widths (measured inside fender).

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork.

Pre-drilled.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate Size Wheel

Part Number RWD-1401- 0172 RWD-1401- 0175

4.5” Wide

21”

5.5” Wide

3 x 21”

Front Fender – Flared Short

Heavy gauge steel construction. Available in two widths (measured inside fender).

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork.

Pre-drilled.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate Size Wheel

Part Number RWD-1401- 0171 RWD-1401- 0174

4.5” Wide

21”

5.5” Wide

3 x 21”

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Blank Rear Fenders

Rear Fender - 11" Rigid Blank

Heavy gauge steel construction. Large enough to cut out custom style.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Description Part Number 11” Rigid Blank RWD-1401-0143

Rear Fender - 13" Rigid Blank

Heavy gauge steel construction. Large enough to cut out custom style.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Description Part Number 13" Rigid Blank for 280 Tire RWD-1401-0144

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Blank Rear Fenders

Rear Fender - 13" Softail® Blank

Heavy gauge steel construction. Large enough to cut out custom style.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Description Part Number 13" Softail® Blank 15" Radius RWD-1401-0142 13" Softail® Blank 16" Radius RWD-1401-0241

Rear Fender - 9" Softail® Blank

Heavy gauge steel construction. Large enough to cut out custom style.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Description Part Number 9" Softail® Blank RWD-1401-0140 13" Softail® Blank 16" Radius RWD-1401-0241

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Rear Fender Strutless

Rear Fender Cruiser Strutless for Stock Softails

Heavy gauge steel construction, 9" wide, ensures strength and a flawless finish.

Internal strut design eliminates external struts.

Available with or without taillight.

Fits stock Softails with 180/200 tire.

Requires the removal of stock framehorns.

Does not fit the Deuce.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Description Part Number 9" Wide Cruiser - 2000- 2005 RWD-1401-0159 9" Wide Longshot With Tail Light Kit - 2000-2005 RWD-1401-0161 9" Wide Longshot - Pre 2000 RWD-1401-0160 9" Wide Longshot With Tail Light Kit -Pre 2000 RWD-1401-0162

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Rear Fender Strutless

Fender Rear Longshot Strutless for Stock Softails

Heavy gauge steel construction, 9" wide, ensures strength and a flawless finish.

Internal strut design eliminates external struts.

Available with or without taillight.

Fits stock Softails with 180/200 tire.

Requires the removal of stock framehorns.

Does not fit the Deuce.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Description Part Number 9" Wide Pro-Street - 2000- 2005 RWD-1401-0163

9" Wide Pro-Street With Tail Light Kit - 2000-2005 9" Wide Pro-Street - Pre 2000 9" Wide Pro-Street With Tail Light Kit -Pre 2000

RWD-1401-0132

RWD-1401-0164

RWD-1401-0133

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Rear Fender Strutless

Fender Rear Pro Street Strutless for Stock Softails

Heavy gauge steel construction, 9" wide, ensures strength and a flawless finish.

Internal strut design eliminates external struts.

Available with or without taillight.

Fits stock Softails with 180/200 tire.

Requires the removal of stock framehorns.

Does not fit the Deuce. Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Description Part Number 9" Wide Pro-Street - 2000- 2005 RWD-1401-0134

9" Wide Pro-Street With Tail Light Kit - 2000-2005 9" Wide Pro-Street - Pre 2000 9" Wide Pro-Street With Tail Light Kit -Pre 2000

RWD-1401-0136

RWD-1401-0135

RWD-1401-0137

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Rear Fender Strutless

Rear Strutless Rocker Fender with Splash Guard & Tail Light Kit By RWD

Rocker rear strutless fender with splashguard included.

With or without tail light kit.

Heavy 16 gauge steel construction.

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork.

Handmade in the USA.

All fenders must be prefitted before painting.

Note: All measurements are approximate. Description Part Number Rear Strutless Rocker Fender Long With Splash- Guard RWD-50047 Rear Strutless Rocker Fender Short With Splash- Guard RWD-50052 Rear Strutless Rocker Fender With Splash-Guard & Tail Light RWD-50048

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Rear Fender Swingarm

Rear Swingarm Fender - Cruiser

Heavy gauge steel construction.

Swingarm fenders feature wiring tubes.

Each fender is inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come undrilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Size Part Number 7.25” Wide RWD-1401-0242 8.25” Wide (with holes for Baggers with 180 tire) RWD-1401-0240 8.25” Wide RWD-DS-380468 9” Wide RWD-DS-380467 10.5” Wide RWD-7807-0077 11” Wide RWD-DS-380619

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Rear Fender Swingarm

Rear Swingarm Fender - Duster

Heavy gauge steel construction.

Swingarm fenders feature wiring tubes.

Each fender is inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come undrilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Size Part Number 7.25” Wide RWD-DS-380327 8.5” Wide RWD-DS-380329 9” Wide RWD-DS-380323

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Rear Fender Swingarm

Rear Swingarm Fender - Gambler

Heavy gauge steel construction.

Swingarm fenders feature wiring tubes.

Each fender is inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come undrilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Size Part Number 7.25” Wide RWD-DS-380332 8.5” Wide RWD-DS-380331 9” Wide RWD-DS-380330 10.5” Wide RWD-7807-0080 11” Wide RWD-DS-380615

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Rear Fender Swingarm

Rear Swingarm Fender - Longshot

Heavy gauge steel construction.

Swingarm fenders feature wiring tubes.

Each fender is inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come undrilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Size Part Number 7.25” Wide RWD-DS-380357 8.5” Wide RWD-DS-380358 9” Wide RWD-DS-380359 10.5” Wide RWD-7807-0082 11” Wide RWD-DS-380618

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Rear Fender Swingarm

Rear Swingarm Fender - Maverick

Heavy gauge steel construction.

Swingarm fenders feature wiring tubes.

Each fender is inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come undrilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Size Part Number 7.25” Wide RWD-DS-380328 8.5” Wide RWD-DS-380326 9” Wide RWD-DS-380324

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Rear Fender Swingarm

Rear Swingarm Fender – Pro Street

Heavy gauge steel construction.

Swingarm fenders feature wiring tubes.

Each fender is inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come undrilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Size Part Number 7.25” Wide RWD-1401-0002 8.5” Wide RWD-1401-0003 9” Wide RWD-1401-0004 9” Wide with Tail Light RWD-1401-0156 11” Wide RWD-1401-0005 11” Wide with Tail Light RWD-1401-0157 13” Wide RWD-1401-0006 13” Wide with Tail Light RWD-1401-0158

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Rear Fender Swingarm

Rear Swingarm Fender – Racer

Heavy gauge steel construction.

Swingarm fenders feature wiring tubes.

Each fender is inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come undrilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Size Part Number 8.5” Wide RWD-DS-380466 9” Wide RWD-DS-380465 10.5” Wide RWD-7807-0076 11” Wide RWD-DS-380620

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Rear Fender Swingarm

Rear Swingarm Fender – Stinger

Heavy gauge steel construction.

Swingarm fenders feature wiring tubes.

Each fender is inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fenders come undrilled (unless noted) so you can position them to look and work best for your application.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Size Part Number 7.25” Wide RWD-DS-380354 8.5” Wide RWD-DS-380355 9” Wide RWD-DS-380356 10.5” Wide RWD-7807-0081 11” Wide RWD-DS-380617

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Lighting

Iron Light Headlight

The new cutting edge three dimensional headlight features a chrome aluminum housing.

The bulb is a H4 55/60W halogen bulb.

This one of a kind chrome headlight gives just the right touch of “old school” styling.

This headlight includes a 1’ wire harness.

The headlight measures 6.75” x 6.75” x 5” deep and features a universal single bolt bottom mount block to fit most Harley applications.

Thread size is 3/8-16 Coarse.

Russ Wernimont Designs now offers an adapter mount that will extend the light out for more versatility and better fit. P/N RWD-2001-0133 - SWIVEL MOUNT.

When ordering please specify if you want the Swivel Mount.

Part # RWD-2001-0004

Iron Light Headlight Swivel Mount Adapter

Swivel-mount headlight adapter will extend the headlight out for more versatility and a better fit.

Part # RWD-2001-0133

LED Cat Eye System Replacement Cat Eye Capsule

Replacement capsule for our LED Cat Eye Tail Light/Turn Signal/License Plate System (PN 2010- 0010).

Part # RWD-2010-0340

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Lighting

LED Cat Eye System-License Plate/Tail Light/Turn Signal

Brilliant Starburst Optics. Permanently Sealed Light Capsule.

Three color LED Light system; Red Run/Pulsing Brake/Amber Turn/White License Plate.

Aluminum Chrome Plated Frame.

The Russ Wernimont Designs CATEYE LED Lighting system has been designed and engineered to set new standards for lighting solutions for Harley Davidson motorcycles. Designed from the ground up we have taken a classic style light and cut fresh new lines into it. The light unit contains an all-in-one solution for running lights signals braking and license plate. CATEYE LED technology gives you brighter higher visibility. We have brought this over the top with our 3 color light system using red for running a hot red pulsating brake light amber turn signals and put them all in one light unit.

Our goal was to develop a new look that is slick looking technology advanced and functional.

Dimensions are: 7” across x 5.5” tall. It is 7/8” thick on the top and 5/8” thick on the bottom.

Easy installation plugs into OEM Harley-Davidson 96-UP Softails 97-UP Big Twins 99-UP Sports and splices into most custom builds.

Requires the use of mounting adapters sold separately.

Part # RWD-2010-0010

LED Cat Eye Tail Light/Turn Signal with Weld Kit

14 Gauge Steel Bucket. Fits most custom fenders. Dual function LED Tail light with LED Turn Signals. Includes a raw weld-in pocket, wiring harness and instruction. Can be used on O.E.M. fenders, custom fenders or various custom applications. Measures 6-7/8"L X 3-3/8"W X 3/4"Thick.

Part # RWD-2010-0015

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Lighting

Mount for the LED Cat Eye System-Bobtail Mount Bolt-On

For 84-05 O.E.M. FXST rear fender bolt on.

Black powder-coat.

Dimensions are 7-1/8" Wide x 5-3/4" Tall x 1/8" Thick.

This mount works with RWD LED Cat Eye Tail Light/Turn Signal/License Plate System (PN RWD- 2010-0010) as pictured to the left.

The LED Cat Eye System and the mount are sold separately.

Part # RWD-2010-0047

Mount for the LED Cat Eye System-Flush Mount Bolt-On

Fits O.E.M. Harley-Davidson 7.25" wide FL Fenders 1996-2007; and RWD 7.25" Wide Fenders.

Chrome plated aluminum. Mounting Hardware is included.

Covers up existing holes.

This mount works with our LED Cat Eye Tail Light/Turn Signal/License Plate System (PN RWD- 2010-0010) as pictured to the left.

The LED Cat Eye System and the mount are sold separately.

Part # RWD-2010-0012

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Lighting

Mount for the LED Cat Eye System-Flush Mount Weld-In

Raw Flush mount pocket, weld-in, for RWD and most custom 9" and wider fenders.

14 gauge steel pocket.

Not for use with body line fenders.

Dimensions are 8-5/8" Wide X 7-1/4" Tall X 3/4" Thick.

This mount works with our LED Cat Eye Tail Light/Turn Signal/License Plate System (PN RWD- 2010-0010) as pictured to the left.

The LED Cat Eye System and the mount are sold separately.

Part # RWD-2010-0011

Mount for the LED Cat Eye System-Swing Arm Mount Weld-On

Raw Swingarm mount (weld-on).

This mount works with our LED Cat Eye Tail Light/Turn Signal/License Plate System (PN RWD- 2010-0010).

The LED Cat Eye System and the mount are sold separately.

Part # RWD-2010-0014

Mount for the LED Cat Eye System-Universal Mount Bolt-On

Chrome Universal pocket (bolt-on).

Fits most custom and O.E.M. fenders. Chrome plated aluminum.

Mounting hardware is included.

This mount works with our LED Cat Eye Tail Light/Turn Signal/License Plate System (PN RWD- 2010-0010) as shown to the left.

The LED Cat Eye System and the mount are sold separately.

Part# RWD-2010-0013

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Stock Replacement

Gas Tanks '08-'10 Glides

3" stretch direct bolt on tank for 08-10 fuel injected Road Glides, Electra Glides or Street Glides. One piece tanks feature a curved bottom for a custom look. Available in 2 widths; 17.5" (approximately 6 gallon capacity), or 20" (approximately 6.5 gallon capacity). Includes raw dash panel that replaces the existing dash. Any aftermarket cap will fit. We recommend drag specialties 0703-0060. Fuel- injected tank accepts the stock O.E.M. fuel-pump assembly and fuel level sending unit and uses a L96-07 vented gas cap. These tanks come powder-coated on the inside to ensure a clean sealed surface. There is no need to etch or use any other sealer. Minimal prep work will be needed prior to paint.

Requires stock seat modification.

Seats are sold separately. Made in the

USA using 14 and 16 gauge steel. Tig welded by an American craftsman.

Warning: all tanks are shipped unpainted.

All gas tanks should be fitted before being painted to eliminate potential problems. Description Part Number Gas Tank 3" Fuel Inj 08-10 FL (20" Wide) - Glide RWD-0701-0526 Gas Tank 3" Fuel Inj 08-10 FL (17.5" Wide) - Glide RWD-0701-0527

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Stock Replacement

Front Stock Replacement Fender for Glides and Road Kings

Front stock replacement fender for Road Glides or Road Kings 94-09 FLT, FLHT, FLHR, FLTR models.

6.5" wide, heavy gauge steel construction without rivets.

Comes pre-drilled for easy installation.

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate Size Part Number

6.5" Wide Replacement Fender F/16"-18"; 94-07 Glides & Road Kings 6.5" Wide Replacement Fender F/21"; 94-09 Glides & Road Kings 6.5" Wide Replacement Fender F/16"-18"; 08-09 Glides & Road Kings [With clearance for brake lines]

RWD-1401-0139

RWD-1401-0205

RWD-1401-0284

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Stock Replacement

Gas Tank 2.5" Ext 01-07 Softails

2.5” direct bolt on tank for 01-07 softails. One piece tank features a curved bottom for a custom look. This tank uses the stock dash and accepts any aftermarket cap. Comes with fuel gauge bung and filler bung. Approximately 5.5 gallon fuel capacity. Dimensions are: 23-1/2" Long x 17-1/4" Wide x 9" High. Tunnel width is 3-1/4". We offer a low profile dash that fits this tank available in our online store at this link: These tanks are powdercoated on the inside to ensure a clean sealed surface. There is no need to etch or use any other sealer. Minimal prep work will be needed prior to paint.

Requires stock seat modification. Seats are sold separately.

Made in the USA using 16 gauge stamped steel. Tig welded by an American craftsman.

Warning: all tanks are shipped unpainted. All gas tanks should be fitted before being painted to eliminate potential problems. Description Part Number Gas Tank 2.5" Fuel Injected 01-07 Softails® RWD-0701-0434 Gas Tank 2.5" Carbureted 01-07 Softails® RWD-0701-0435

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Stock Replacement

Gas Tank Glides - Pre-2008

3" stretch direct bolt on tank for 03-07 Fuel Injected, or 96-06 Carbureted Road Glides, Electra Glides or Street Glides, One piece tanks feature a curved bottom for a custom look. Available in 2 widths; 17.5" (approximately 6 gallon capacity), or 20" (approximately 6.5 gallon capacity). Includes raw dash panel that replaces the existing dash. Any aftermarket cap will fit. We recommend PN RWD-0703-0060. Fuel-injected tank accepts the stock O.E.M. fuel- pump assembly and uses a L96-07 vented gas cap. Carbureted tanks include a filler plate/neck assembly and use a L96-07 vented gas cap. These tanks come powder-coated on the inside to ensure a clean sealed surface. There is no need to etch or use any other sealer. Minimal prep work will be needed prior to paint. Requires stock seat modification. Tanks fit with RWD Profile (PN RWD-0804-0247) and Protour (PN RWD-0804-0248) Seats, sold separately. Note: Filler plate on carb tanks may require modifications to reinstall early-style sending unit. Made in the USA using 14 and 16 gauge steel. Tig welded by an American Craftsman. Description Part Number

Gas Tank 3" Fuel Injected 03-07 FL (20" Wide) - Glide Gas Tank3" Carbureted 96- 06 FL (20" Wide) - Glide Gas Tank 3" Fuel Injectd 03- 07 FL (17.5" Wide) - Glide Gas Tank 3" Carbureted 96- 06 FL (17.5" Wide)- Glide

RWD-0701-0126

RWD-0701-0127

RWD-0701-0318

RWD-0701-0319

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Stock Replacement

Gas Tank Road Kings - Pre-2008

3" stretch direct bolt on tank for 03-07 Fuel Injected, or 96-06 Carbureted Road Kings. One piece tanks feature a curved bottom for a custom look. Available in 2 widths; 17.5" (approximately 6 gallon capacity), or 20" (approximately 6.5 gallon capacity). Includes raw dash panel that replaces the existing dash. Any aftermarket cap will fit. We recommend PN RWD-0703-0060. Fuel-injected tank accepts the stock O.E.M. fuel- pump assembly and uses a L96-07 vented gas cap. Carb tanks include a filler plate/neck assembly and use a L96-07 vented gas cap. These tanks come powder-coated on the inside to ensure a clean sealed surface. There is no need to etch or use any other sealer. Minimal prep work will be needed prior to paint. Requires stock seat modification. Tanks fit with RWD Profile (PN RWD-0804-0247) and Protour (PN RWD-0804-0248) Seats, sold separately. Note: Filler plate on carb tanks may require modifications to reinstall early-style sending unit. Made in the USA using 14 and 16 gauge steel. Tig welded by an American Craftsman. Description Part Number

Gas Tank 3" Fuel Injected 03-07 FL (20" Wide) - King Gas Tank3" Carbureted 96- 06 FL (20" Wide) - King Gas Tank 3" Fuel Injectd 03- 07 FL (17.5" Wide) - King Gas Tank 3" Carbureted 96- 06 FL (17.5" Wide)- King

RWD-0701-0189

RWD-0701-0190

RWD-0701-0320

RWD-0701-0321

RWD-50011 Lower Extended Saddlebags

Extended Lower Saddlebags. Uses Stock Hardware. Fiberglass construction.

Comes as a set of two lower saddlebags without lids.

5" Longer than Stock Saddlebags. Dimensions are 22" wide X 17-1/4" Long X 7-1/2" Thick.

The extended bag area is not useable space.

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Stock Replacement

Fender Rear Stock 2006-2009 Softail Replacement With Tail Light Kit

Heavy gauge steel construction. 9.5" wide stock Softail fender available with or without taillight assembly.

Predrilled; no spacers required.

Flat mounting surface for the electronic panel.

Fits 2006-2009 FX Softails. Fits with stock seat and stock fender struts.

Does not fit Deuces.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate. Description Part Number 9.5" Wide OEM Style/ 06- 09 FXST W/200 Tire RWD-1401-0176

9.5" Wide OEM Style With Tail Light Kit / 06-09 FXST W/200 Tire 9.5" Wide OEM Style Long/ 06-09 FXST W/200 Tire 9.5" Wide OEM Style Long With Tail Light Kit / 06-09 FXST W/200 Tire

RWD-1401-0177

RWD-1401-0285

RWD-1401-0286

RWD-3501-0254 Rounded Saddlebag Lids

Smoother Rounded Saddlebag Lids to match the flowing lines of our Gas Tank and Front Fender.

Uses Stock Hardware.

Fiberglass construction.

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Stock Replacement

Part# RWD-50027 -RWD Threadless Pop-up Gas Cap/Adapter

Threadless pop-up Gas Cap/Adapter.

Measures 2-3/4" diameter x 1-1/4" high. Protects Paint. Screws into stock Harley filler bung. Comes in raw aluminum so it can be painted to match, or in chrome (Part# RWD-50035).

Not vented.

This gas cap is designed to be a sealed cap using an external tank vent.

Will not fit Sportsters.

Made in the USA.

Part# RWD-2202-0119 - Low Profile Dash Replacement For 1996-2006 Road Kings®

Sleek low profile dash replaces the bulky stock dash on stock 1996-2006 Road Kings. Measures 19-1/4" Long x 5-1/2" Wide x 4-1/2" High. Material is polished cast aluminum. If your stock Bezel and Indicator do not fit in our dash, the you will need to purchase the Bezel and Indicator from Harley-Davidson. The part number for the Bezel is 68112-99, and the part number for the Indicator is 68113-99A. All parts must be prefitted before painting.

Part# RWD-2202-0117 - Low Profile Dash Replacement For 1996-2006 Glides

Sleek low profile dash replaces the bulky stock dash on stock 1996-2007 Road Glides.

Measures 18-1/4" Long x 5-1/2" Wide x 4-1/4" High. Material is polished cast aluminum.

Part# RWD-2202-0118 - Low Profile Dash For 2001-2006 Softail® Tank

Sleek blow profile dash replaces the bulky stock dash on stock 2001-2006 Softails. Measures 18- 1/2" Long x 5-1/2" Wide x 5" High. Material is polished cast aluminum.

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Tanks

5" Teardrop Tank

Approximately 5 Gallons.

Measures 25"L x 7" H. Available in two widths, 16" and 14". The tunnel depth is 6-1/4". The tunnel width is 2.5". The rear of the tank is 3.25" wide. 24.5" Long tunnel length; 25.5" long with seat pocket. Comes with recessed mounts or standard mounts. One piece, single cap design. Handcrafted from 14 and 16 gauge steel.

Requires the use of an L96-06 vented gas cap and 22mm petcock.

Required mount kits may be used on any custom application.

Note: Not for use on fuel-injected models.

WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. Description Part Number 5" TEAR DROP TANK COMPLETE ASSEMBLED STANDARD MOUNT RWD-0701-0114 5" TEAR DROP TANK COMPLETE ASSEMBLED RECESSED MOUNT RWD-0701-0115

5" TEAR DROP TANK NARROW COMPLETE ASSEMBLED STANDARD MOUNT 5" TEAR DROP TANK NARROW COMPLETE ASSEMBLED RECESSED MOUNT 5" TEAR DROP TANK SHEET METAL PIECES ONLY (16" WIDTH)

RWD-0701-0116

RWD-0701-0117

RWD-RWD-900PC

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Tanks

Curved Bottom Inlay Tank

Approximately 3 Gallons.

Measures 12" W x 8.5" H. Available in three lengths; 23-3/4", 25-1/4", and 27". The tunnel depth is 6-1/4". The rear of the tank is 3.5" wide.

One piece, single cap design. Handcrafted from 14 and 16 gauge steel.

Requires the use of an L96-06 vented gas cap and 22mm petcock.

Required mount kits may be used on any custom application.

Note: Not for use on fuel-injected models. WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. Description Part Number INLAY CHOPPER TANK RWD-0701-0110

SHORT CURVED BOTTOM COMPLETE ASSEMBLED (23-3/4"L) INLAY CHOPPER TANK MEDIUM CURVED BOTTOM COMPLETE ASSEMBLED (25-1/4"L) INLAY CHOPPER TANK LONG CURVED BOTTOM COMPLETE ASSEMBLED (27"L) INLAY CHOPPER TANK SHORT CURVED BOTTOM SHEET METAL PIECES ONLY (23-3/4"L) INLAY CHOPPER TANK MEDIUM CURVED BOTTOM SHEET METAL PIECES ONLY (25-1/4"L) INLAY CHOPPER TANK LONG CURVED BOTTOM SHEET METAL PIECES ONLY (27"L)

RWD-0701-0111

RWD-0701-0112

RWD-600SCPC

RWD-600MCPC

RWD-600LCPC

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Tanks

Custom Gas Tank F/00-06 FXST

Approximately 4.25 gallons.

Fits 00-06 Softail Frames but requires the relocation of gauges, indicator lights and ignition switch. Measures 21-1/4" L x 15-1/2" W x 7" H. The square tunnel width is 3.25" and the depth is 6". The rear of the tank is 4.5" wide.

One piece, single cap design. Handcrafted from 14 and 16 gauge steel.

Requires the use of an L96-06 vented gas cap and 22mm petcock. Required mount kits may be used on any custom application.

Requires the relocation of gauges, indicator lights and ignition switch.

Note: Not for use on fuel-injected models. WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. Description Part Number CUSTOM GAS TANK F/00- 06 FXST RWD-1914-0009

Rollies Speed Shop – (07) 3252 5381

Russ Wernimont Designs – Tanks

Flat Bottom Inlay Tank

Approximately 3 Gallons.

Measures 28" L x 13-1/2" W x 7-3/4" H. The tunnel depth is 5-1/4". The rear of the tank is 3" wide.

One piece, single cap design.

Handcrafted from 14 and 16 gauge steel.

Requires the use of an L96-06 vented gas cap and 22mm petcock.

Required mount kits may be used on any custom application.

Note: Not for use on fuel-injected models.

WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. Description Part Number

INLAY CHOPPER TANK LONG FLAT BOTTOM COMPLETE ASSEMBLED INLAY CHOPPER TANK LONG FLAT BOTTOM SHEET METAL PIECES ONLY

RWD-0701-0113

RWD-600LFPC

Rollies Speed Shop – (07) 3252 5381