NAMZ Catalogue
Wires & Electrical Cabling for Harley Davidson Motorcycles.
PRODUCT CATALOG - V1.2020
1999
2019
NAMZ Custom Cycle Products
PROVIDING YOU 20-YEARS OF ELECTRICAL EXCELLENCE! HELPFUL INFORMATION
As I sit here and type this, it is hard to believe that we’ve been at it for over 20-years now! There have been so many trends that have come and gone and even come back again, but one thing is for sure, everyone here at NAMZ prides themselves in providing YOU with the very best products and service. Whether you are a new customer or have been using our products for years, the message remains the same. We want to be “the” one stop shop, the industry’s best source for electrical connectors, wiring harnesses, installation supplies, Badlands modules and LED lighting! Without you, our loyal customers, we wouldn’t be here, so here’s to YOU, Happy 20- Year Anniversary to us, both! May we continue to be along with you for the next 20-years, rubber side down. JZ Ÿ ALL NAMZ electrical products including harnesses, pigtails and modules, including Badlands Modules are MADE IN THE USA! That’s right, we make them right here in Pennsylvania, 5-days a week. That’s why we can offer YOU a LIFETIME warranty on many items.
Badlands Basic Color Codes
Ÿ Black: Ÿ Red: Ÿ Blue: Ÿ Orange:
GROUND BRAKE
Brown: Violet: Yellow: Gray:
RIGHT TURN SIGNAL LEFT TURN SIGNAL
RIGHT RUN-BRAKE-TURN output to rear turn signal LEFT RUN-BRAKE-TURN output to rear turn signal
RUNNING LIGHT
FUSED 12+
Badlands Module Family (founded in 1990) All Badlands Modules EXCEPT for LE-01 & LE-02 have a LIFETIME warranty!
Fun Fact: Do you know the fastest and easiest way to fish wires through handlebars or a frame? The inside of a speedometer cable, yes, this spring-steel cable is AWESOME when fishing wires. Simply remove the cable from an old or new speedo cable, tape on your wiring and have at it! Fun Fact: Did you know that we sell over 20,000 Badlands modules a year? That is a lot of modules for sure and we also provide support for each one as well. Every once and a while, we get one sent back claiming to be defective when in reality, it wasn’t hooked up properly. But that’s what we’re here for, and the instructions are on our website! Each year, we average less than 6 ten-thousandth of a percent “defective”, that’s less than (12-modules) for every 20,000 sold! Ÿ ATS or Automatic Turn Signal Canceller: (All modules with ATS- prefix) These OEM style replacement or custom flashing modules provide self-canceling turn signals that last for 11-seconds before shutting off. Ÿ Brake Light Eliminator : (All modules with IHL-04 prefix) These modules were designed for ALL CAN/Bus models without a center taillight. The factory added the brake light function onto the high-filliment rear left and right turn signals preventing customers to use AMBER turn signals, tow a five wire trailer or even using center taillights with built-in turn signals. Ÿ Illuminator: (All modules with ILL- prefix) These are the industry’s first RUN-BRAKE-TURN signal modules with built-in Load Equalizer . If you want to convert your rear AMBER only turn signals to having RED running light, brake light and turn signal functions, this is your module. The load equalizer will prevent rapid flashing signals when changing bulbs over to LED’s. Ÿ Intensifier: (IHL-01, IHL-02 & IHL-03 prefix) These modules are intended to provide dual functions to a single function light. If you have a turn signal or taillight with (1) power wire, the IHL-01 will convert the light to high/low functions, (run/brake). The IHL-02 is designed for (2) single power wire lights and the compact IHL-03 will only work on a pair of LED’s no more than 500-milliamps per side. Ÿ Load Equalizer: (All modules with LE- prefix) These modules is where it all started back in 1990. The “originals” of preventing rapid flashing turn signals when converting to non-OEM bulbs or LED’s. Load equalizers simply match the amperage stock/OEM TSM or TSSM’s are looking for from a stock bulb, telling the bike all is okay. Ÿ Dynamic & Static Sequential Illuminator: These “industry first” modules provide sequential flashing turn signals on (3) LED’s left and (3) LED’s right when activated. They also provide running light and brake light functions with a built-in Load Equalizer. On the Dynamic version, each of the (3) LED’s will flash on then off before starting the sequence over again. On the Static version, each of the (3) LED’s will light and stay on before all (3) shut off and restart the sequence over again. Can use ANY LED you wish but they must be RED. Ÿ PRO-III: This “all-in-one” Illuminator module was intended for custom motorcycles or when performing a complete re-wire. It provides 11-second self-canceling turn signal functions, front left and right turn signal output (1 wire per side) has running light and turn signal functions, rear left and right turn signal output (1 wire per side) has running light, brake light and turn signal functions and there are left and right turn signal indicator wires for dash/instrument cluster.
CONTENT The most complete listing of electrical components all in one place.
Wiring Extension Kits
Connectors & Terminals
p.2
p.34
p.50 Braided Hoses & Clamps Brass, Copper & Stainless Steel oil and fuel hoses are sold in 25-foot spools. Clamps are polished natural brass, chrome or powder coated black, copper and silver in 1/4”-5/16” and 3/8” sizes. Sold in 6-packs. Handlebar switch harnesses, throttle- by-wire harnesses, heated grip and oxygen sensors. If there is a need for an extension, we have it. All of our terminals are crimped on by mil-spec crimping presses for a perfect fit.
American or Metric, you’ll find them all in this section. Brand names like AMP/TE, Deutsch, Molex, JST, JAE and Sumitomo. NAMZ also carries all of the mating male and female terminals, including wire seals.
Wiring Harnesses & Kits
p.42
CAN/Bus, replacement OEM ignition harnesses, power ports, y-adaptors, LED headlight harnesses or tour- pack harnesses. Most of our harnesses are 100% plug-n-play for an easy installation.
Wire Braiding Kits
Badlands Modules
p.51
p.52
Stainless steel, 100% brass or natural copper, our braided harnesses or do it yourself kits help create that custom look. Easy to cut, easy to install and the clear heat shrink protects your ride. p.66 Trailer Isolators - Off Road We offer trailer isolators for just about every make and model motorcycle. Available in 4 or 5 wire systems based on your trailer’s design. The ever growing UTV market was in need of some NAMZ love so we have started a collection of must haves!
Badlands, the original lighting module company since 1990! The complete line with many new Plug-n-Play versions. We also offer CAN/Bus switch controllers, momentary switch convertors and trailer isolators for most makes and models.
Tools & Supplies
p.69
Crimp & removal tools, O2 bungs, red, blue and yellow terminals, fork, ring or quick disconnect, they’re all here. Wire, fuses, circuit breakers, headlamp sockets, adaptors, terminals, relays and sockets, push buttons, switches and audio supplies.
NAMZ CCP Inc. / Table of Contents
1
AMP / TE CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS MULTILOCK
CONNECTORS
NA-174463-2
The AMP Multilock Series has been used on all factory motorcycles since 1996 and are still used today. They are small, compact connectors available in many cavity sizes. You will find these connectors on rear fender harnesses, front and rear turn signals, heated grip wiring, older main harness and speedometer connections.
2-POSITION FEMALE PLUG
Requires (2) FEMALE terminals. OEM PART NUMBER: 73152-96BK
NA-174460-2
NA-174921-2
2-POSITION MALE CAP
3-POSITION FEMALE PLUG
Requires (2) MALE terminals. OEM PART NUMBER: 73102-96BK
Requires (3) FEMALE terminals. OEM PART NUMBER: 73153-96BK
NA-174928-2
NA-174922-2
4-POSITION FEMALE PLUG OEM PART NUMBER: 73154-96BK Requires (4) FEMALE terminals.
3-POSITION MALE CAP OEM PART NUMBER: 73103-96BK Requires (3) MALE terminals.
NA-174929-2
NA-174923-2
4-POSITION MALE CAP OEM PART NUMBER: 73104-96BK Requires (4) MALE terminals.
6-POSITION FEMALE PLUG OEM PART NUMBER: 73156-96BK Requires (6) FEMALE terminals.
NA-174930-2
NA-173850-2
6-POSITION MALE CAP OEM PART NUMBER: 73106-96BK Requires (6) MALE terminals.
8-POSITION FEMALE PLUG
Requires (8) FEMALE terminals. OEM PART NUMBER: 73158-96BK
NAMZ CCP Inc. / AMP-TE
2
CONNECTORS
AMP / TE CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
NA-174931-2
NA-174465-2
8-POSITION MALE CAP
10-POSITION FEMALE PLUG OEM PART NUMBER: 73160-96BK Requires (10) FEMALE terminals.
Requires (8) MALE terminals. OEM PART NUMBER: 73108-96BK
NA-174932-2
NA-173851-2
10-POSITION MALE CAP OEM PART NUMBER: 73110-96BK Requires (10) MALE terminals.
12-POSITION FEMALE PLUG OEM PART NUMBER: 73164-96BK Requires (12) FEMALE terminals.
NA-174933-2
NA-173631-1
100-PACK, FEMALE TERMINALS OEM PART NUMBER: 73191-96 CRIMP TOOL: NDC-990170
12-POSITION MALE CAP OEM PART NUMBER: 73112-96BK Requires (12) MALE terminals.
NA-173645-1
NAC-BKO
100-PACK, MALE TERMINALS OEM PART NUMBER: 73190-96 CRIMP TOOL: NDC-990170
MULTILOCK BUILDERS KIT Kit includes (8) 2, 3, 4, 6, and 8- position PLUG and CAP connectors with (100) male & female terminals.
NA-174056-2
NA-174057-2
2-POSITION FEMALE PLUG (040)
2-POSITION MALE CAP (040)
Requires (2) FEMALE (040) Series terminals. OEM PART NUMBER: 72912-01BK
Requires (2) MALE (040) Series terminals. OEM PART NUMBER: 72902-01BK
NAMZ CCP Inc. / AMP-TE
3
AMP / TE CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
CONNECTORS
NA-174966-2
NA-174967-2
4-POSITION FEMALE PLUG OEM PART NUMBER: 72914-01BK Requires (2) FEMALE (040) Series terminals.
4-POSITION MALE CAP (040)
Requires (2) MALE (040) Series terminals. OEM PART NUMBER: 72904-01BK
NA-175062-1
NA-175063-1
25-PK, FEMALE (040) TERMINALS OEM PART NUMBER: 72991-01 CRIMP TOOL: NDC-990170
25-PK, MALE (040) TERMINALS
CRIMP TOOL: NDC-990170 OEM PART NUMBER: 72990-01
MATENLOCK
NA-350777-1
The AMP Matenlock Series is a popular connector in the aftermarket, used on many of the smaller production motorcycle manufacturers like Indian, Pure Steel, Swift and Titan. These white connectors are watertight and come packaged with the mating wire and/or interface seal for convenience. Easy to use, many cavity options available.
2-POSITION FEMALE PLUG KIT: Includes wire & interface seals. Requires (2) FEMALE terminals.
NA-350778-1
NA-350766-1
2-POSITION MALE CAP
3-POSITION FEMALE PLUG KIT: Includes wire & interface seals. Requires (3) FEMALE terminals.
Requires (2) MALE terminals. KIT: Includes wire seal.
NA-350767-1
NA-350779-1
3-POSITION MALE CAP KIT: Includes wire seal. Requires (3) MALE terminals.
4-POSITION FEMALE PLUG KIT: Includes wire & interface seals. Requires (4) FEMALE terminals.
NAMZ CCP Inc. / AMP-TE
4
CONNECTORS
AMP / TE CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
NA-350780-1
NA-350715-1
4-POSITION MALE CAP KIT: Includes wire seal. Requires (4) MALE terminals.
6-POSITION FEMALE PLUG Requires (6) FEMALE terminals. KIT: Includes wire & interface seals.
NA-350781-1
NA-350720-1
6-POSITION MALE CAP KIT: Includes wire seal. Requires (6) MALE terminals.
9-POSITION FEMALE PLUG KIT: Includes wire & interface seals. Requires (9) FEMALE terminals.
NA-350782-1
NA-350735-1
12-POSITION FEMALE PLUG KIT: Includes wire & interface seals. Requires (12) FEMALE terminals.
9-POSITION MALE CAP KIT: Includes wire seal. Requires (9) MALE terminals.
NA-350783-1
NA-350736-1
12-POSITION MALE CAP KIT: Includes wire seal. Requires (12) MALE terminals.
15-POSITION FEMALE PLUG Requires (15) FEMALE terminals. KIT: Includes wire & interface seals.
NA-350784-1
NA-350536-1
15-POSITION MALE CAP
100-PACK, FEMALE SOCKETS
Requires (15) MALE terminals. KIT: Includes wire seal.
CRIMP TOOL: NDC-990170 MATENLOCK female terminals.
NAMZ CCP Inc. / AMP-TE
5
TERMINALS - WIRE SEALS - BUILDERS KITS AMP / TE CONNECTORS
CONNECTORS
NA-350218-1 100-PACK, MALE PINS
NAC-BKA
MATENLOCK BUILDERS KIT Kit includes (6) 2 & 12, (8) 6 & 9, and (4) 3 & 4-position PLUG and CAP connectors with (100) male & female terminals.
MATENLOCK male terminals. CRIMP TOOL: NDC-990170
OEM MATENLOCK
NA-1-480349-0
This series of connectors and terminals has been used between 1971 and 1995 on most OEM HD models. A very simple to use connection system, these OEM Matenlock’s are perfect when servicing or restoring the original look of an early model, without sacrificing quality. Available in 1 to 12-position male and female connectors with stamped terminals.
1-POSITION FEMALE OEM PART NUMBER: 72043-71A Requires (1) FEMALE terminal.
NA-1-480350-0 1-POSITION MALE OEM PART NUMBER: 72044-71A Requires (1) MALE terminal.
NA-1-480318-0
2-POSITION FEMALE OEM PART NUMBER: 72034-71 Requires (2) FEMALE terminal.
NA-1-480319-0 2-POSITION MALE OEM PART NUMBER: 72035-71 Requires (2) MALE terminals.
NA-1-480303-0
3-POSITION FEMALE Requires (3) FEMALE terminals. OEM PART NUMBER: 72036-71
NA-1-480305-0
NA-1-480424-0
3-POSITION MALE
4-POSITION FEMALE OEM PART NUMBER: 70292-89 Requires (4) FEMALE terminals.
Requires (3) MALE terminals. OEM PART NUMBER: 72040-71
NAMZ CCP Inc. / AMP-TE
6
CONNECTORS
AMP / TE CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
NA-1-480426-0
NA-1-480270-0
4-POSITION MALE OEM PART NUMBER: 70291-89 Requires (4) MALE terminals.
6-POSITION FEMALE OEM PART NUMBER: 72037-71 Requires (6) FEMALE terminals.
NA-1-480340-0
NA-1-480283-0
6-POSITION MALE OEM PART NUMBER: 72041-71 Requires (6) MALE terminals.
8-POSITION FEMALE Requires (8) FEMALE terminals. OEM PART NUMBER: 70287-81A
NA-1-480345-0
NA-1-480285-0
10-POSITION FEMALE OEM PART NUMBER: 70293-87A Requires (10) FEMALE terminals.
8-POSITION MALE OEM PART NUMBER: 70288-81 Requires (8) MALE terminals.
NA-1-480339-0
NA-1-480287-0
10-POSITION MALE Requires (10) MALE terminals. OEM PART NUMBER: 70305-90
12-POSITION FEMALE Requires (12) FEMALE terminals. OEM PART NUMBER: 72278-74
NA-1-480288-0
NA-61314-1
12-POSITION MALE Requires (12) MALE terminals. OEM PART NUMBER: 72276-74
100-PK, OEM FEMALE SOCKETS OEM PART NUMBER: 72038-71A CRIMP TOOL: NDC-990170
NAMZ CCP Inc. / AMP-TE
7
AMP / TE / DELPHI TERMINALS - WIRE SEALS - BUILDERS KITS
CONNECTORS
NA-61116-1 100-PK, OEM MALE PINS OEM PART NUMBER: 72039-71A CRIMP TOOL: NDC-990170
NTBW-CK
KIT
7-POSITION MALE & FEMALE Throttle-by-wire MCL male & female connectors with terminals. We recommend using our crimp tool NJC- 990120 for a perfect crimp every time.
NA-282080-1 2-POSITION FEMALE PLUG OEM PART NUMBER: 72007-05 KIT: Includes wire seals & terminals. USE: O2 Sensors
NA-282089-1 5-POSITION FEMALE PLUG OEM PART NUMBER: 72012-07 USE: Active Exhaust Sensor KIT: Includes wire seals & terminals.
NA-1-1355668-2 2-POSITION FEMALE PLUG
NA-2-1355668-2 2-POSITION FEMALE PLUG
KIT: Includes wire seals & terminals. OEM PART NUMBER: 72450-01 USE: V-Rod Headlamp Connector
USE: V-Rod Headlamp Connector KIT: Includes wire seals & terminals. OEM PART NUMBER: 72449-01
NMCON-03P 3-POSITION FEMALE PLUG
NMCON-03R 3-POSITION MALE PLUG
USE: ‘17-Up FXST Rear Fender OEM PART NUMBER: 69201613 KIT: Includes wire seals & terminals.
USE: ‘17-Up FXST Rear Fender KIT: Includes wire seals & terminals. OEM PART NUMBER: 69201406
DELPHI NAMZ has the most complete collection of Delphi EFI and component connectors in the industry. NAMZ is the only supplier where you can find mating connectors for many of them! All of our Delphi connectors come with terminals, TPA locks and wire seals for easy installation. OEM part numbers are provided for quick reference. 8
ND-15336027-B 2-POSITION FEMALE PLUG OEM PART NUMBER: 72062-06 USE: Air Temp Sensor KIT: Includes wire seals & terminals.
NAMZ CCP Inc. / AMP-TE / DELPHI
CONNECTORS
DELPHI CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
ND-15336029-B
ND-13532244 3-POSITION FEMALE PLUG OEM PART NUMBER: 72065-06A KIT: Includes wire seals & terminals. USE: TPS Sensor
3-POSITION FEMALE PLUG
USE: Speed Sensor & Alarm KIT: Includes wire seals & terminals. OEM PART NUMBER: 72064-06
ND-15354716-B
ND-12129946-B
4-POSITION FEMALE PLUG
3-POSITION FEMALE PLUG OEM PART NUMBER: 72230-98 KIT: Wire seals, terminals & TPA. USE: Map Sensor
KIT: Includes wire seals & terminals. OEM PART NUMBER: 72066-06A USE: Idle Speed, Coil & Fuel Pump.
ND-12129142-B
ND-15419715
2-POSITION FEMALE PLUG
2-POSITION FEMALE PLUG OEM PART NUMBER: 72098-06 USE: Fuel Injector KIT: Wire seals, terminals & TPA.
OEM PART NUMBER: 72244-95 USE: Fuel Injector
KIT: Includes terminals.
ND-12162215-B
ND-12162193-B
2-POSITION FEMALE PLUG OEM PART NUMBER: 72273-95 USE: Engine Temp Sensor KIT: Includes terminals.
2-POSITION FEMALE PLUG OEM PART NUMBER: 72247-95
USE: Air Temp Sensor KIT: Includes terminals.
ND-12162182-B
ND-12162191-B
3-POSITION FEMALE PLUG OEM PART NUMBER: 72280-95 USE: TPS Sensor KIT: Includes terminals.
4-POSITION FEMALE PLUG OEM PART NUMBER: 72263-95 USE: Idle Speed & Ignition Coil KIT: Includes terminals.
NAMZ CCP Inc. / DELPHI
9
NAMZ CCP Inc. / DELPHI
DELPHI CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
CONNECTORS
ND-12065298
ND-12129387 1-POSITION FEMALE PLUG OEM PART NUMBER: 72350-11 KIT: Includes wire seal & terminals. USE: BCM Power
4-POSITION FEMALE PLUG
USE: Oil Pressure Switch OEM PART NUMBER: 74438-99 KIT: Wire seals, terminals & TPA.
NA-1-488533-6
ND-FBP
18-POSITION FEMALE PLUG
1-POSITION FEMALE PLUG, 5PK OEM PART NUMBER: 72260-04 USE: Accessory power. KIT: 5PK, includes terminals.
USE: BCM Connector OEM PART NUMBER: 72664-12 KIT: Includes terminals.
ND-MBP
ND-12077591
1-POSITION MALE PLUG, 5PK
5-POSITION FEMALE PLUG USE: ‘14-Up Tour Pack Connector OEM PART NUMBER: 69200225 KIT: Includes wire seal & terminals.
KIT: 5PK, includes terminals. OEM PART NUMBER: 72100-04 USE: Accessory power.
ND-15397577
NHD-69200193
MULTI-POSITION FEMALE PLUG OEM PART NUMBER: 69200193 USE: ‘14-Up Radio & BCM KIT: Includes 3-sizes of terminals.
6-POSITION FEMALE PLUG OEM PART NUMBER: 69201394 USE: ‘17-Up M8 Throttle Control KIT: Includes wire seal & terminals.
NHD-72130-04
NHD-72485-07
12-POSITION FEMALE PLUG
4-POSITION FEMALE PLUG OEM PART NUMBER: 72485-07 USE: ‘07-Up Fuel Pump Connector KIT: Includes wire seal & terminals.
KIT: Includes wire seal & terminals. OEM PART NUMBER: 72130-04 USE: ‘04-Up Speedo & Tri-Bar Light
NAMZ CCP Inc. / DELPHI
10
CONNECTORS
DELPHI CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
NMD-410016 3-POSITION MALE PLUG MATES WITH: OEM # 72064-06 KIT: Includes wire seal & terminals. USE: Speed Sensor/Siren MATE.
NMD-410027 3-POSITION MALE PLUG
KIT: Includes wire seal & terminals. MATES WITH: OEM # 72065-06 USE: TPS Sensor MATE.
NMD-410017 4-POSITION MALE PLUG
NMD-410001 4-POSITION MALE PLUG MATES WITH: OEM # 72230-98 USE: Map Sensor MATE. KIT: Wire seals, terminals & TPA.
USE: Fuel Pump & Coil MATE. MATES WITH: OEM # 72066-06 KIT: Includes wire seal & terminals.
NMD-109076 2-POSITION ADAPTER PLUG MATES WITH: OEM # 72098-06 and converts to OEM # 72244-95. KIT: No terminals needed.
NMD-109077 2-POSITION ADAPTER PLUG MATES WITH: OEM # 72244-95 and converts to OEM # 72098-06. KIT: No terminals needed.
NDP-ABK EFI & COMPONENT BUILDERS KIT Kit includes an assortment of EFI, Component, Exhaust and O2 Sensor connectors with all needed wire seals and terminals. Perfect for any shop!
NHD-72078-00 ECM 36 PIN CONNECTOR KIT EFI Models: 2002-2011 (HD# 72078- 00) Connector, Strain Relief, retainer lock, Seal, Zip-Tie, Terminals.
WEATHER PACK
NDP-38061
The Delphi Weather Pack Series is an environmentally sealed connection system, made to withstand exposure to extreme temperatures, moisture and chemicals with superior performance. They are a less expensive alternative than other watertight connectors, although they are larger in size. Terminals will accommodate #16-#18 wire sizes. NAMZ CCP Inc. / DELPHI
1-POSITION FEMALE CONNECTOR KIT: Includes wire seal. Requires (1) FEMALE terminal.
11
NAMZ CCP Inc. / DELPHI
DELPHI CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
CONNECTORS
NDP-38060
NDP-38063
1-POSITION MALE CONNECTOR
2-POSITION FEMALE CONNECTOR
Requires (1) MALE terminal. KIT: Includes wire seal.
Requires (2) FEMALE terminals. KIT: Includes wire seals.
NDP-38062
NDP-38065
3-POSITION FEMALE CONNECTOR KIT: Includes wire seals. Requires (3) FEMALE terminals.
2-POSITION MALE CONNECTOR KIT: Includes wire seals. Requires (2) MALE terminals.
NDP-38064
NDP-38069
5-POSITION FEMALE CONNECTOR KIT: Includes wire seals. Requires (5) FEMALE terminals.
3-POSITION MALE CONNECTOR
Requires (3) MALE terminals. KIT: Includes wire seals.
NDP-38068
NDP-30037 50-PACK, FEMALE TERMINALS WEATHER PACK female terminals. CRIMP TOOL: NDC-990170
5-POSITION MALE CONNECTOR
Requires (5) MALE terminals. KIT: Includes wire seals.
NDP-30036 50-PACK, MALE TERMINALS WEATHER PACK male terminals. CRIMP TOOL: NDC-990170
NDP-39000
10-PACK, WIRE SEALS WEATHER PACK wire seals. KIT: 10-Pack of replacement seals.
NAMZ CCP Inc. / DELPHI
12
CONNECTORS
DELPHI CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
DELPHI PIGTAILS
PT-12129142-B
The Delphi pigtail concept was born when a customer emailed us and said that having EFI and component connectors pre-wired as pigtails, with OEM color matching wire, would be awesome. Why not, a MIL SPEC machine crimp, matching wire colors and ready to install, it doesn’t get any easier! The end of the wire is stripped but the jacket is left to prevent wire fraying.
FUEL INJECTOR PIGTAIL OEM connector # 72244-95 with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
PT-12129946-B
PT-12162182-B
THROTTLE POSITION PIGTAIL OEM connector # 72280-95 with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
MAP SENSOR PIGTAIL
OEM connector # 72230-98 with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
PT-12162191-B
PT-12162193-B
IDLE SPEED & COIL PIGTAIL
ENGINE TEMP PIGTAIL OEM connector # 72273-95 with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
OEM connector # 72263-95 with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
PT-12162215-B
PT-13532244 THROTTLE POSITION PIGTAIL OEM connector # 72065-06A with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
INTAKE AIR TEMP PIGTAIL OEM connector # 72247-95 with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
PT-15336027-B
PT-15336029-B
SPEED SENSOR/ALARM PIGTAIL OEM connector # 72064-06 with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
AIR INTAKE PIGTAIL OEM connector # 72062-06 with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
NAMZ CCP Inc. / DELPHI
13
NAMZ CCP Inc. / DELPHI
DELPHI / DEUTSCH CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
CONNECTORS
PT-15354716-B
PT-15419715
IGNITION COIL/IDLE AIR PIGTAIL OEM connector # 72066-06A with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
FUEL INJECTOR PIGTAIL OEM connector # 72098-06 with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
PT-410001
PT-410016
MATE TO SPEED/SIREN PIGTAIL OEM connector # 72064-06 with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
MATE TO MAP SENSOR PIGTAIL Mates to OEM connector # 72230-98 with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
PT-410017
PT-410027
MATE TO IGNITION COIL PIGTAIL OEM connector # 72066-06 with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
MATE TO TPS SENSOR PIGTAIL OEM connector # 72065-06 with color matching 15” long wire crimped and installed. Wires are stripped with slug left on and comes with 3/16” heat shrink.
DEUTSCH DT
DP-2G 2-POSITION FEMALE PLUG OEM PART NUMBER: 72132-94GY KIT: Includes wedge lock only.
NAMZ is proud to be the LARGEST provider of Deutsch Connectors, terminals and hand tools in the industry. One of the easiest connectors to service, watertight and found on OEM models since 1994 through current models. Available in GRAY or BLACK, 2 through 12-position male and female gender. Solid terminals or stamped available.
DR-2G
DP-3G
2-POSITION MALE RECEPTACLE OEM PART NUMBER: 72122-94GY KIT: Includes wedge lock only.
3-POSITION FEMALE PLUG OEM PART NUMBER: 72133-94GY KIT: Includes wedge lock only.
NAMZ CCP Inc. / DELPHI / DEUTSCH
14
CONNECTORS
TERMINALS - WIRE SEALS - BUILDERS KITS DEUTSCH CONNECTORS
DR-3G
DP-4G
3-POSITION MALE RECEPTACLE
4-POSITION FEMALE PLUG
KIT: Includes wedge lock only. OEM PART NUMBER: 72123-94GY
KIT: Includes wedge lock only. OEM PART NUMBER: 72134-94GY
DR-4G
DP-6G
6-POSITION FEMALE PLUG OEM PART NUMBER: 72136-94GY KIT: Includes wedge lock only.
4-POSITION MALE RECEPTACLE OEM PART NUMBER: 72124-94GY KIT: Includes wedge lock only.
DR-6G
DP-8G
6-POSITION MALE RECEPTACLE OEM PART NUMBER: 72126-94GY KIT: Includes wedge lock only.
8-POSITION FEMALE PLUG
KIT: Includes wedge lock only. OEM PART NUMBER: 72138-94GY
DR-8G
DP-12G 12-POSITION FEMALE PLUG KIT: Includes wedge lock only. OEM PART NUMBER: 72139-94GY
8-POSITION MALE RECEPTACLE
KIT: Includes wedge lock only. OEM PART NUMBER: 72128-94GY
DR-12G
DP-2B
12-POSITION MALE RECEPTACLE
2-POSITION FEMALE PLUG
KIT: Includes wedge lock only. OEM PART NUMBER: 72129-94GY
KIT: Includes wedge lock only. OEM PART NUMBER: 72112-94BK
NAMZ CCP Inc. / DEUTSCH
15
NAMZ CCP Inc. / DELPHI
TERMINALS - WIRE SEALS - BUILDERS KITS DEUTSCH CONNECTORS
CONNECTORS
DR-2B
DP-3B
2-POSITION MALE RECEPTACLE
3-POSITION FEMALE PLUG OEM PART NUMBER: 72133-94BK KIT: Includes wedge lock only.
KIT: Includes wedge lock only. OEM PART NUMBER: 72102-94BK
DR-3B
DP-4B
4-POSITION FEMALE PLUG
3-POSITION MALE RECEPTACLE OEM PART NUMBER: 72103-94BK KIT: Includes wedge lock only.
KIT: Includes wedge lock only. OEM PART NUMBER: 72114-94BK
DR-4B
DP-6B
4-POSITION MALE RECEPTACLE OEM PART NUMBER: 72104-94BK KIT: Includes wedge lock only.
6-POSITION FEMALE PLUG OEM PART NUMBER: 72116-94BK KIT: Includes wedge lock only.
DR-6B
DP-8B 8-POSITION FEMALE PLUG OEM PART NUMBER: 72118-94BK KIT: Includes wedge lock only.
6-POSITION MALE RECEPTACLE
KIT: Includes wedge lock only. OEM PART NUMBER: 72106-94BK
DR-8B
DP-12B
8-POSITION MALE RECEPTACLE OEM PART NUMBER: 72108-94BK KIT: Includes wedge lock only.
12-POSITION FEMALE PLUG OEM PART NUMBER: 72119-94BK KIT: Includes wedge lock only.
NAMZ CCP Inc. / DEUTSCH
16
CONNECTORS
DEUTSCH CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
DR-12B
STAMPED SOCKETS
12-POSITION MALE RECEPTACLE
100-PACK, FEMALE SOCKETS OEM PART NUMBER: 72191-94 CRIMP TOOL: DSCT-02
KIT: Includes wedge lock only. OEM PART NUMBER: 72109-94BK
STAMPED PINS
SOLID SOCKETS
100-PACK, FEMALE SOCKETS
100-PACK, MALE TERMINALS OEM PART NUMBER: 72190-94 CRIMP TOOL: DSCT-02
CRIMP TOOL: DPCT-01 OEM PART NUMBER: 72193-98
DT-HP
SOLID PINS
100-PACK, MALE TERMINALS
10-PACK, HOLE PLUGS
CRIMP TOOL: DPCT-01 OEM PART NUMBER: 72192-98/R
USE: DT Series only. OEM PART NUMBER: 72195-94
NDC-BKG DEUTSCH GRAY BUILDERS KIT Kit includes (8) 2, 3, 4, 6, and 8- position PLUG and CAP connectors with (100) male & female terminals.
NDC-BKB DEUTSCH BLACK BUILDERS KIT Kit includes (8) 2, 3, 4, 6, and 8- position PLUG and CAP connectors with (100) male & female terminals.
DEUTSCH DTM These smaller versions of the original Deutsch DT Series, were first used back in 1998 and are just as reliable and serviceable as the larger version. Available in 2 through 12-positions, male and female mates and black in color. Our DTM connectors come with wedge locks and stamped terminals for easy installation. Hole plugs are available separately. NAMZ CCP Inc. / DEUTSCH
MDP-2B 2-POSITION FEMALE PLUG
OEM PART NUMBER: 74112-98BK KIT: Includes wedge lock & terminals.
17
NAMZ CCP Inc. / DELPHI
DEUTSCH CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
CONNECTORS
MDR-2B 2-POSITION MALE RECEPTACLE OEM PART NUMBER: 74102-98BK KIT: Includes wedge lock & terminals.
MDP-3B 3-POSITION FEMALE PLUG
OEM PART NUMBER: 74113-98BK KIT: Includes wedge lock & terminals.
MDP-4B 4-POSITION FEMALE PLUG
MDR-3B 3-POSITION MALE RECEPTACLE KIT: Includes wedge lock & terminals. OEM PART NUMBER: 74103-98BK
OEM PART NUMBER: 74114-98BK KIT: Includes wedge lock & terminals.
MDR-4B 4-POSITION MALE RECEPTACLE OEM PART NUMBER: 74104-98BK KIT: Includes wedge lock & terminals.
MDP-6B 6-POSITION FEMALE PLUG
KIT: Includes wedge lock & terminals. OEM PART NUMBER: 74116-98BK
MDR-6B 6-POSITION MALE RECEPTACLE OEM PART NUMBER: 74106-98BK KIT: Includes wedge lock & terminals.
MDP-8B 8-POSITION FEMALE PLUG
KIT: Includes wedge lock & terminals. OEM PART NUMBER: 74118-98BK
MDR-8B
MDP-12B 12-POSITION FEMALE PLUG
8-POSITION MALE RECEPTACLE OEM PART NUMBER: 74108-98BK KIT: Includes wedge lock & terminals.
OEM PART NUMBER: 74119-98BK KIT: Includes wedge lock & terminals.
NAMZ CCP Inc. / DEUTSCH
18
CONNECTORS
DEUTSCH & JAE CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
MDR-12B
MDP-SOCKETS 100-PACK, FEMALE SOCKETS CRIMP TOOL: DSCT-02 OEM PART NUMBER: 74191-98
12-POSITION MALE RECEPTACLE KIT: Includes wedge lock & terminals. OEM PART NUMBER: 74109-98BK
MDR-PINS
DTM-HP 10-PACK, HOLE PLUGS
100-PACK, MALE SOCKETS OEM PART NUMBER: 72190-98 CRIMP TOOL: DSCT-02
USE: DTM Series only. OEM PART NUMBER: 74195-98
DTFPH-01 3-POSITION FUEL PUMP HEADER OEM PART NUMBER: 72435-00 KIT: Includes header only.
HDD-XL-KIT 1-POSITION MALE & FEMALE OEM PART NUMBER: (MALE) 72180-94 & (FEMALE) 72181-94. KIT: Includes terminals.
JAE The JAE MX-1900 Series were introduced in 2011 and first used on Softail models with the start of CAN/Bus technology. Being very small and watertight, these connectors attached handlebar switch wiring to the BCM, or Body Control Module. Available only in 2 and 4-position, male and female and stamped crimp terminals. Direct OEM replacement.
NJ-2S51 2-POSITION FEMALE SOCKET OEM PART NUMBER: 72906-11 Requires (2) FEMALE terminals.
NJ-2P51 2-POSITION MALE PIN HOUSING Requires (2) MALE terminals. OEM PART NUMBER: 72905-11
NJ-4S51 4-POSITION FEMALE SOCKET OEM PART NUMBER: 72908-11 Requires (4) FEMALE terminals.
NAMZ CCP Inc. / DEUTSCH / JAE
19
NAMZ CCP Inc. / DELPHI
JAE / JST CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
CONNECTORS
NJ-4S52 4-POSITION FEMALE SOCKET OEM PART NUMBER: 69201179 Requires (4) FEMALE terminals.
NJ-4P51 4-POSITION MALE PIN HOUSING Requires (4) MALE terminals. OEM PART NUMBER: 72907-11
NJ-4P52
NJ-19S
25-PACK, FEMALE PINS
4-POSITION MALE PIN HOUSING
CRIMP TOOL: NJC-990120 OEM PART NUMBER: 72910-11
OEM PART NUMBER: 69201180 Requires (4) MALE terminals.
NJ-19P
NJC-990120
NAMZ UNIVERSAL CRIMP TOOL
25-PACK, MALE PINS
Our “go-to” hand crimp tool in the shop when we need to crimp one or two quick open barrel / stamped terminals. Perfect for 30 to 18 gauge terminals.
OEM PART NUMBER: 72909-11 CRIMP TOOL: NJC-990120
JST Looking for space saving connectors? If space is at a premium, these are a perfect choice. They are found on Big Dog, Victory and HD Motorcycles. They are the smallest watertight connectors available and come in 2, 3, 4, 6 and 8-position. Terminals are stamped and sold in 100-packs and our NJC-990120 crimp tool is a must.
NJST-02R 2-POSITION RECEPTACLE OEM PART NUMBER: 69200305 KIT: Includes wire seal.
NJST-02P
NJST-03R
2-POSITION TAB KIT: Includes wire seal. Requires (2) MALE terminals.
3-POSITION RECEPTACLE
Requires (3) FEMALE terminals. KIT: Includes wire seal.
NAMZ CCP Inc. / JAE / JST
20
CONNECTORS
TERMINALS - WIRE SEALS - BUILDERS KITS JST CONNECTORS
NJST-04R
NJST-03P
3-POSITION TAB
4-POSITION RECEPTACLE Requires (4) FEMALE terminals. OEM PART NUMBER: 69200306
Requires (3) MALE terminals. KIT: Includes wire seal.
NJST-04P
NJST-06R
6-POSITION RECEPTACLE Requires (6) FEMALE terminals. OEM PART NUMBER: 69201162
4-POSITION TAB KIT: Includes wire seal. Requires (4) MALE terminals.
NJST-06P 6-POSITION TAB
NJST-08R
8-POSITION RECEPTACLE
Requires (6) male terminals. OEM PART NUMBER: 69201163
Requires (8) FEMALE terminals. KIT: Includes wire seal.
NJST-08P 8-POSITION TAB
NJST-RTERM
100-PACK, FEMALE TERMINALS
Requires (8) MALE terminals. KIT: Includes wire seal.
CRIMP TOOL: NJC-990120 OEM PART NUMBER: 69200307
NJC-990120 NAMZ UNIVERSAL CRIMP TOOL Our “go to” hand crimp tool in the shop when we need to crimp one or two quick open barrel / stamped terminals. Perfect for 30 to 18 gauge terminals.
NJST-PTERM 100-PACK, MALE TERMINALS OEM PART NUMBER: 69201164 CRIMP TOOL: NJC-990120
NAMZ CCP Inc. / JST
21
NAMZ CCP Inc. / DELPHI
MOLEX CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
MOLEX MX-150 The “factory,” started using the Molex MX-150 Series connectors in 2007. Making the switch from Deutsch connectors made sense since they took up more space. Molex connectors are more compact, watertight and easy to service when needed. These connectors are available from 2 to 20-position and in (4) colors.
CONNECTORS
NM-33471-0302 3-POSITION FEMALE PLUG OEM PART NUMBER: 72514-07GY Requires (3) female terminals.
NM-33472-4002 4-POSITION FEMALE PLUG OEM PART NUMBER: 72444-07GY Requires (4) female terminals.
NM-33481-0302 3-POSITION MALE RECEPTACLE Requires (3) male terminals. OEM PART NUMBER: 72513-07GY
NM-33482-4002 4-POSITION MALE RECEPTACLE Requires (4) male terminals. OEM PART NUMBER: 72415-07GY
NM-33472-0802 8-POSITION FEMALE PLUG OEM PART NUMBER: 72469-07GY Requires (8) female terminals.
NM-33482-0802 8-POSITION MALE RECEPTACLE Requires (8) male terminals. OEM PART NUMBER: 72447-07GY
NM-33472-1202 12-POSITION FEMALE PLUG Requires (12) female terminals. OEM PART NUMBER: 72489-07GY
NM-33482-1202
NM-33472-1602
12-POSITION MALE RECEPTACLE OEM PART NUMBER: 72490-07GY Requires (8) male terminals.
16-POSITION FEMALE PLUG OEM PART NUMBER: 72491-07GY Requires (16) female terminals.
NAMZ CCP Inc. / MOLEX
22
CONNECTORS
MOLEX CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
NM-33471-0201
NM-33482-1602
16-POSITION MALE RECEPTACLE
2-POSITION FEMALE PLUG OEM PART NUMBER: 69200271 Requires (2) female terminals.
Requires (16) male terminals. OEM PART NUMBER: 72492-07GY
NM-33481-0201
NM-33471-0301
3-POSITION FEMALE PLUG
2-POSITION MALE RECEPTACLE OEM PART NUMBER: 69200272 Requires (2) male terminals.
Requires (3) female terminals. OEM PART NUMBER: 72512-07BK
NM-33481-0301 3-POSITION MALE RECEPTACLE OEM PART NUMBER: 72511-07BK Requires (3) male terminals.
NM-33472-4001
4-POSITION FEMALE PLUG
Requires (4) female terminals. OEM PART NUMBER: 72177-07BK
NM-33482-4001 4-POSITION MALE RECEPTACLE Requires (4) male terminals. OEM PART NUMBER: 72175-07BK
NM-33472-0601
6-POSITION FEMALE PLUG
Requires (6) female terminals. OEM PART NUMBER: 72414-07BK
NM-33471-0601
NM-33482-3601
6-POSITION FEMALE PLUG
6-POSITION MALE RECEPTACLE
Requires (6) male terminals. OEM PART NUMBER: 72188-07BK
OEM PART NUMBER: 72483-08BK Fits: Throttle Control Actuator Requires (6) female terminals.
NAMZ CCP Inc. / MOLEX
23
NAMZ CCP Inc. / DELPHI
MOLEX CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
CONNECTORS
3-POS GREEN
NM-33472-0801 8-POSITION FEMALE PLUG OEM PART NUMBER: 72479-07BK Requires (8) female terminals.
SOLD EACH
FEMALE & MALE CONNECTORS
3-Position Male: OEM # 72534-07GN Requires (3) male terminals. 3-Position Female: OEM # 72540-07GN Requires (3) female terminals.
NM-33482-0801
NM-33472-1201
8-POSITION MALE RECEPTACLE
12-POSITION FEMALE PLUG
Requires (8) male terminals. OEM PART NUMBER: 72478-07BK
Requires (12) female terminals. OEM PART NUMBER: 72487-07BK
NM-33482-1201
NM-33472-1601
16-POSITION FEMALE PLUG OEM PART NUMBER: 72166-07BK Requires (16) female terminals.
12-POSITION MALE RECEPTACLE OEM PART NUMBER: 72488-07BK Requires (12) male terminals.
NM-33482-1601
NM-33472-2001
16-POSITION MALE RECEPTACLE OEM PART NUMBER: 72167-07BK Requires (16) male terminals.
20-POSITION FEMALE PLUG
Requires (20) female terminals. OEM PART NUMBER: 72500-07BK
NM-33471-0303
NM-33481-0303
3-POSITION FEMALE PLUG
3-POSITION MALE RECEPTACLE
Requires (3) female terminals. OEM PART NUMBER: 72542-07BN
Requires (3) male terminals. OEM PART NUMBER: 72541-07BN
NAMZ CCP Inc. / MOLEX
24
CONNECTORS
MOLEX & METRIC CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
100-PK
MOLEX TERMS
NM-31403-2100
2-POSITION FEMALE PLUG OEM PART NUMBER: 72720-07 USE: TSSM Security Antenna. KIT: Includes (2) terminals.
FEMALE & MALE TERMINALS NM-33012-1002: Female terminals. OEM PART NUMBER: 72169-07 OEM PART NUMBER: 72168-07 NM-33000-1002: Male terminals. NMX-CBK MOLEX MX-150 BUILDERS KIT Kit includes (2) 3 & 4, (4) 6 & 8, (3) 12 & 16-position connectors with (100) male & female terminals.
NM-34345-0001
10-PACK, HOLE PLUGS OEM PART NUMBER: 72473-07 USE: Molex MX-150 Series only.
METRIC SHUR & ML
NH-606002 50-PACK, FEMALE SHUR COVER USE: Cover for part # NH-606252. KIT: Includes 50 covers.
Our Metric line of connectors, terminals and seals are one of the most in-depth in the industry. You will find all of the most popularly used connectors on all of the major metric motorcycle manufacturers like Ducati, Triumph, Honda, Kawasaki, Suzuki and Yamaha. Very inexpensive, sold in bulk packs and a must for any custom shop or dealership.
NH-606252 50-PACK, FEMALE SHUR PLUG KIT: Includes 50 terminals. USE: Mates with part # NH-606302.
NH-606102
50-PACK, MALE SHUR COVER KIT: Includes 50 covers. USE: Cover for part # NH-606302.
NH-606302
NH-607301
50-PACK, MALE SHUR PLUG
50-PACK, DUAL FEMALE COVER
USE: Mates with part # NH-606252. KIT: Includes 50 terminals.
USE: Cover for part # NH-607202. KIT: Includes 50 covers.
NAMZ CCP Inc. / MOLEX / METRIC
25
NAMZ CCP Inc. / DELPHI
TERMINALS - WIRE SEALS - BUILDERS KITS METRIC CONNECTORS
CONNECTORS
NH-607202
NH-ML-3B
50-PACK, DUAL FEMALE PLUG KIT: Includes 50 terminals. USE: Mates with part # NH-607301.
3-POSITION FEMALE USE: Mates with part # NH-ML-3A. KIT: 5-Pack of connectors.
NH-ML-3A
NH-ML-4B
4-POSITION FEMALE USE: Mates with part # NH-ML-4A. KIT: 5-Pack of connectors.
3-POSITION MALE USE: Mates with part # NH-ML-3B. KIT: 5-Pack of connectors.
NH-ML-4A
NH-ML-6B
4-POSITION MALE USE: Mates with part # NH-ML-4B. KIT: 5-Pack of connectors.
6-POSITION FEMALE USE: Mates with part # NH-ML-6A. KIT: 5-Pack of connectors.
NH-ML-6A
NH-ML-2BL
6-POSITION MALE
2-POSITION LOCKING FEMALE
KIT: 5-Pack of connectors. USE: Mates with part # NH-ML-6B.
KIT: 5-Pack of connectors. USE: Mates with part # NH-ML-2AL.
NH-ML-2AL
NH-ML-3BL
2-POSITION LOCKING MALE
3-POSITION LOCKING FEMALE USE: Mates with part # NH-ML-3AL. KIT: 5-Pack of connectors.
KIT: 5-Pack of connectors. USE: Mates with part # NH-ML-2BL.
NAMZ CCP Inc. / METRIC
26
CONNECTORS
METRIC CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
NH-ML-4BL
NH-ML-3AL
3-POSITION LOCKING MALE USE: Mates with part # NH-ML-3BL. KIT: 5-Pack of connectors.
4-POSITION LOCKING FEMALE USE: Mates with part # NH-ML-4AL. KIT: 5-Pack of connectors.
NH-ML-4AL
NH-ML-6BL
6-POSITION LOCKING FEMALE USE: Mates with part # NH-ML-6AL. KIT: 5-Pack of connectors.
4-POSITION LOCKING MALE USE: Mates with part # NH-ML-4BL. KIT: 5-Pack of connectors.
NH-ML-6AL 6-POSITION LOCKING MALE KIT: 5-Pack of connectors. USE: Mates with part # NH-ML-6BL.
NH-ML-9BL
9-POSITION LOCKING FEMALE USE: Mates with part # NH-ML-9AL. KIT: 5-Pack of connectors.
NH-ML-9AL 9-POSITION LOCKING MALE KIT: 5-Pack of connectors. USE: Mates with part # NH-ML-9BL.
NH-604101
100-PK, FEMALE ML TERMINALS
USE: ML Series only. KIT: Includes 100 terminals.
NH-605123
NDC-990170 NAMZ UNIVERSAL CRIMP TOOL Our “go-to” hand crimp tool in the shop when we need to crimp one or two quick open barrel / stamped terminals. Perfect for 22 to 14 gauge terminals.
100-PK, MALE ML TERMINALS
USE: ML Series only. KIT: Includes 100 terminals.
NAMZ CCP Inc. / METRIC
27
NAMZ CCP Inc. / DELPHI
METRIC CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
METRIC 250 SERIES
CONNECTORS
NH-RB-1B
The 250-Series is another very popular connector series. Its name derives from the size of the female and male terminals, .25”. These connectors are offered with or without a positive lock. Available from 2 through 6-position, with / without mounting tabs and male and female stamped brass terminals. Found on most metric bikes, these are a perfect replacement.
1-POSITION FEMALE USE: Mates with part # NH-RB-1A. KIT: 5-Pack of connectors.
NH-RB-1A
NH-RB-2B
2-POSITION FEMALE USE: Mates with part # NH-RB-2A. KIT: 5-Pack of connectors.
1-POSITION MALE USE: Mates with part # NH-RB-1B. KIT: 5-Pack of connectors.
NH-RB-2A
NH-RB-3B
2-POSITION MALE
3-POSITION FEMALE USE: Mates with part # NH-RB-3A. KIT: 5-Pack of connectors.
KIT: 5-Pack of connectors. USE: Mates with part # NH-RB-2B.
NH-RB-3A
NH-RB-4B
3-POSITION MALE
4-POSITION FEMALE USE: Mates with part # NH-RB-4A. KIT: 5-Pack of connectors.
KIT: 5-Pack of connectors. USE: Mates with part # NH-RB-3B.
NH-RB-4A
NH-RB-6BT
4-POSITION MALE
6-POSITION FEMALE, MOUNT TAB
KIT: 5-Pack of connectors. USE: Mates with part # NH-RB-4B.
KIT: 5-Pack of connectors. USE: Mates with part # NH-RB-6AF.
NAMZ CCP Inc. / METRIC
28
CONNECTORS
TERMINALS - WIRE SEALS - BUILDERS KITS METRIC CONNECTORS
NH-RB-2BSL
NH-RB-6AF
6-POSITION MALE, MOUNT TAB USE: Mates with part # NH-RB-6BT. KIT: 5-Pack of connectors.
2-POSITION LOCKING FEMALE USE: Mates with part # NH-ML-2ASL. KIT: 5-Pack of connectors.
NH-RB-2ASL
NH-RB-3BSL
3-POSITION LOCKING FEMALE USE: Mates with part # NH-ML-3ASL. KIT: 5-Pack of connectors.
2-POSITION LOCKING MALE
KIT: 5-Pack of connectors. USE: Mates with part # NH-RB-2BSL.
NH-RB-3ASL 3-POSITION LOCKING MALE USE: Mates with part # NH-ML-3BSL. KIT: 5-Pack of connectors.
NH-RB-4BSL
4-POSITION LOCKING FEMALE USE: Mates with part # NH-RB-4ASL. KIT: 5-Pack of connectors.
NH-RB-4ASL 4-POSITION LOCKING MALE KIT: 5-Pack of connectors. USE: Mates with part # NH-RB-4BSL.
NH-RB-6BSL
6-POSITION LOCKING FEMALE USE: Mates with part # NH-RB-6ASL. KIT: 5-Pack of connectors.
NH-RB-6ASL
NH-604512 50-PACK, FEMALE 250 TERMINALS KIT: Includes 50 terminals. USE: 250 Series only.
6-POSITION LOCKING MALE
KIT: 5-Pack of connectors. USE: Mates with part # NH-RB-6BSL.
NAMZ CCP Inc. / METRIC
29
NAMZ CCP Inc. / DELPHI
METRIC CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
CONNECTORS
NH-605502 50-PACK, MALE 250 TERMINALS KIT: Includes 50 terminals. USE: 250 Series only.
NDC-990170 NAMZ UNIVERSAL CRIMP TOOL Our “go-to” hand crimp tool in the shop when we need to crimp one or two quick open barrel / stamped terminals. Perfect for 22 to 14 gauge terminals.
METRIC HM SERIES
NS-6180-2451
Our Sealed HM-Series is a perfect connector for use in off-road or watercraft applications where a water- tight, positive locking connection is a must. Found on metric motorcycles, ATV’s and personal watercraft, available in 2, 3, 4 and 6-positions, male and female with stamped mating terminals. Wire seals and terminals are both sold separately in 50-piece packs.
2-POSITION FEMALE Requires (2) FEMALE terminals & seals.
KIT: (1) connector only.
NS-6187-2801
NS-6180-3451
2-POSITION MALE
3-POSITION FEMALE Requires (3) FEMALE terminals & seals.
Requires (2) MALE terminals & seals.
KIT: (1) connector only.
KIT: (1) connector only.
NS-6187-3801
NS-6180-4181
3-POSITION MALE Requires (3) MALE terminals & seals.
4-POSITION FEMALE
Requires (4) FEMALE terminals & seals.
KIT: (1) connector only.
KIT: (1) connector only.
NS-6187-4441
NS-6180-6181
6-POSITION FEMALE
4-POSITION MALE
Requires (4) MALE terminals & seals.
Requires (6) FEMALE terminals & seals.
KIT: (1) connector only.
KIT: (1) connector only.
NAMZ CCP Inc. / METRIC
30
CONNECTORS
METRIC CONNECTORS TERMINALS - WIRE SEALS - BUILDERS KITS
NS-1500-0106
NS-6187-6801
6-POSITION MALE
50-PACK, FEMALE HM TERMINALS
KIT: Includes 50 terminals.
Requires (6) MALE terminals & seals.
USE: HM & MT Series only.
KIT: (1) connector only.
NS-1500-0105
NS-7160-8234
50-PACK, HM WIRE SEALS
50-PACK, MALE HM TERMINALS
KIT: Includes 50 wire seals.
KIT: Includes 50 terminals.
USE: Crimp with male & female terminals .
USE: HM & MT Series only.
METRIC MT SERIES
NS-6180-2321
Our Sealed MT-Series is also a perfect connector for use in off-road or watercraft applications where a watertight, positive locking connection is a must. Found on metric motorcycles, ATV’s and personal watercraft, available in 2, 3, 4 and 6-positions, male, female with stamped terminals. Wire seals and terminals are both sold separately in 50-piece packs.
2-POSITION LOCKING FEMALE Requires (2) FEMALE terminals & seals.
KIT: (1) connector only.
NS-6187-2311 2-POSITION LOCKING MALE
NS-6180-3241
3-POSITION LOCKING FEMALE Requires (3) FEMALE terminals & seals.
Requires (2) MALE terminals & seals.
KIT: (1) connector only.
KIT: (1) connector only.
NS-6187-3231
NS-6180-4771 4-POSITION LOCKING FEMALE
3-POSITION LOCKING MALE Requires (3) MALE terminals & seals.
Requires (3) FEMALE terminals & seals.
KIT: (1) connector only.
KIT: (1) connector only.
NAMZ CCP Inc. / METRIC
31
NAMZ CCP Inc. / DELPHI
Made with FlippingBook flipbook maker