LIGHTING MODULES BADLANDS ILL-PRO-III & MISC. MODULES
ILLUMINATOR™ WITH LEQ & ATS
AMERICAN IRONHORSE POWER HARNESS
MOMENTARY-TO-LATCHING SWITCH MODULE
If you own or are working on an early 2002- 2005 American Ironhorse model, you will need one of these kits. Designed to replace the defective PCM or Power Control Module and the Flasher Box. Our kit is easy to install and uses fuse with a full-size starter relay and a Plug-N-Play NAMZ Hot Box self-canceling turn signal module. The only way to keep your investment on the road!
Our Plug-N-Play Illuminator™ PRO-III provides running light, brake light and turn signal functions to the rear turn signals, Running light and Turn Signal functions to the front turn signals, left and right indicator light output and an 11-second self-canceling feature. If you have a custom bike, no other module is needed to wire your ride!
Momentary Switch Converter, (Intended for custom applications where momentary switches are used for a HIGH/LOW headlight switch and RUN/KILL switch.) Our module converts the momentary switch into a HIGH/LOW latching and an ON/OFF latching for a run switch. Simply add fused power, a ground wire, and connect your momentary switches through the NSC-01 for the latching functions you need!
FITS: Universal/custom applications.
PULSING BRAKE MODULE
2011-UP CAN/BUS SWITCH MODULES
IGNITION SWITCH CONVERTER MODULE
Hardwired Pulsing Brake Module™ for use on ANY brake light to provide (5) flashes before staying lit or until brake is released. Must be installed BEFORE (in front of) any other module in order to operate properly.
FITS: 2011-Up Softail, 2012-Up Dyna, ALL 2014-Up Models. CAN/Bus - Ignition Switch Converter Module. Allows the use of any aftermarket Ignition Switch or Accessory switch on ALL Harley CAN/Bus models. (not for use on keyless models)
Our CAN/Bus Controllers were designed to allow the use of custom handlebar switch controls for ALL 2011-Up FXST, 2012-Up Dyna and 2014-Up BAGGER Models. BAGGER NOTE: One 3-function button is required for the left and right side in order to operate the Infotainment System. An additional 3-function button is required for cruise control. NCBC-N01: Non-Bagger CAN/Bus Controller. NCBC-B01: Bagger CAN/Bus Controller.
NAMZ CCP Inc. / LIGHTING MODULES
NAMZ CCP Inc. / DELPHI
Made with FlippingBook flipbook maker