Jims Catalogue

VALVE GUIDE REAMERS & CASE SAVER TAPPET REAMER

NEW

HIGH SPEED STEEL

SOLID CARBIDE

No. 1133 PART NO. No. 1150 No. 1151 No. 1152 No. 1153 No. 1154 No. 1155 No. 1156

DIAMETER

DESCRIPTION

APPLICATIONS

7mm

High Speed Steel

Twin Cam 2005 to present (except CVO T/C) Buell, Sportster 2004 to present.

NEW

.3110” .3115” .3120” .3410” .3772” .3777” .3782”

Solid Carbide Reamer Solid Carbide Reamer Solid Carbide Reamer* Solid Carbide Reamer Solid Carbide Reamer Solid Carbide Reamer Solid Carbide Reamer

Evo/ T/C /Sportster/Buell. Evo/ T/C /Sportster/Buell.

8

T/C 1999 to 2004 w/5/16” valve stems EVO BT and XL, 1984 to 1999.

Evo/ T/C /Sportster/Buell.

Pan/Shovel. Pan/Shovel.

Pan/Shovel w/ JIMS Valves.

FIG. 2 SIZING THE GUIDE, THE JIMS ® WAY!

HIGH SPEED STEEL & SOLID CARBIDE VALVE GUIDE REAMERS These unique reamers feature a 2" long pilot for perfect alignment with the valve guide while reaming. With these reamers you can expect to ream a valve guide to exact dimensions without any taper in just a few seconds.

FIG. 1

NEW

JIMS ® MANGANESE-BRONZE VALVE GUIDE REAMING INSTRUCTIONS A. Install the cylinder head in a vise. Protect the cylinder head with a clean towel or rag, as pictured.

B. Insert the reamer pilot in the guide and lubricate with a good quality cutting oil like K-Line Bronze Reamer Lube. (Fig.1) C. Ream at 100-200 RPM with a slow feed rate. Let the reamer do the work and do not force the reamer. (Fig.2) D. After reaming all the way through, pull the reamer out with-out stopping the rotation. (DO NOT reverse rotation!) E. Clean the chips off the reamer and you’re ready for the next valve guide.

TWIN CAM CASE SAVER OVERSIZE TAPPET REAMER This tool can be a case saver if you have worn out or damaged tap- pet bores on any Twin Cam engine case. This reamer tool is designed to ream the case to a perfect finish hone on each tappet hole, to fit a JIMS 1811`. For more details see No. 789-IS instructions. No. 789 - Use on any Twin Cam engine, OEM, or aftermarket.

NEW

TAPPET POWERGLIDE™II “PRESSURIZED OILING”

NEW

+.010 Oversize Twin Cam Powerglide II Tappet. No. 1811 - Use on all Twin Cam 1999 to present.

147