Jims Catalogue

VALVE TRAIN TOOLS

SHOULDERLESS VALVE GUIDE INSTALLER TOOLS These valve guide installer tools will install each guide to the correct depth when installed into head. Remover handles are used as handle for installer tools. Must be ordered separately. Refer to chart for correct handle usage. Use tool No.1001 or No. 2240 for removing or installing shoulder type valve guides.

FOR MORE DETAILS SEE

34731-84

USE WITH INSTRUCTION HANDLE NO. SHEET NO.

PART NO.

APPLICATION

No. 938

Use on all T/C 2005 and later that use the 7mm valve guides. Use on 2004 and later Sportster ® . Use on 2004 Buell ® Twins to present, except 1125R. Use on H-D ® 110” CVO motorcycles 2007 to present. Use on all Big Twin motors with about .560” Dia.. O.D.,

No.937

No. 938-IS

8

No. 949

No.937

No.949-IS

No. 34731-84

No.34740-84 No.34731-IS

Includes aftermarket heads.

SHOULDERLESS VALVE GUIDE REMOVER TOOLS Use to remove shoulderless valve guides including the newest 7mm size guides. On the 7mm guides there is no need to remove carbon off the guide because you remove from the spring side of head. Use chart to reference installer part No. Order separately. FOR MORE DETAILS SEE

USE ON INSTALLER INSTRUCTION TOOL NO. SHEET NO.

PART NO.

APPLICATION

No. 937

Use on all T/C 05’ and later that use the 7mm valve guides. Use on 04’ and later XL Use on 04’ Buell ® Twins to present, except 1125R.

No.938

No.937-IS

No. 34740-84

Use on all Big Twin motors and Twin Cam ® to 2004.

No.34731-84 No.34740-IS

NOTE: Includes all aftermarket heads.

No.34643-84 No.948 & No.949

SHOULDERED VALVE GUIDE DRIVER SET

PARTS AVAILABLE SEPARATELY

NO. QTY.

DESCRIPTION

PART NO.

Use for guide removal and installation on all models. Manufactured from 1144 stress proof steel. For more details see No.1001-IS

1 1 2 1 3 1 4 1

DRIVER /BLACK .370” (3/8”)

1001-1 1001-2 1001-3 1001-IS

➀ ➁ ➂

DRIVER /BRIGHT ZINC .338” (11/32”)

DRIVER /GOLD .307” (5/16”)

instructions. Sold as 3 piece set. No. 1001 - Use on all models.

INSTRUCTION SHEET

VALVE GUIDE SEAL INSTALLER TOOLS These valve guide seal installer tools will install each guide seal evenly and square on the top of each guide. Factory driver spacer not required with JIMS tool. Order handle separately for use on seal installer tools. Refer to chart for correct handle usage.

34643-84

FOR MORE DETAILS SEE

No.34740-84 No. 948-IS No.34740-84 No.34643-IS USE WITH INSTRUCTION HANDLE NO. SHEET NO.

PART NO.

APPLICATION

No. 948

Use on 110” valve guides requiring H-D ® seal No.18046-98 Use on all Big Twin models 1984-2004 with .560” Dia.

No. 34643-84

Guides. Includes aftermarket heads.

146