RWD Catalogue

Russ Wernimont Designs – Tanks

Curved Bottom Inlay Tank

Approximately 3 Gallons.

Measures 12" W x 8.5" H. Available in three lengths; 23-3/4", 25-1/4", and 27". The tunnel depth is 6-1/4". The rear of the tank is 3.5" wide.

One piece, single cap design. Handcrafted from 14 and 16 gauge steel.

Requires the use of an L96-06 vented gas cap and 22mm petcock.

Required mount kits may be used on any custom application.

Note: Not for use on fuel-injected models. WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. Description Part Number INLAY CHOPPER TANK RWD-0701-0110

SHORT CURVED BOTTOM COMPLETE ASSEMBLED (23-3/4"L) INLAY CHOPPER TANK MEDIUM CURVED BOTTOM COMPLETE ASSEMBLED (25-1/4"L) INLAY CHOPPER TANK LONG CURVED BOTTOM COMPLETE ASSEMBLED (27"L) INLAY CHOPPER TANK SHORT CURVED BOTTOM SHEET METAL PIECES ONLY (23-3/4"L) INLAY CHOPPER TANK MEDIUM CURVED BOTTOM SHEET METAL PIECES ONLY (25-1/4"L) INLAY CHOPPER TANK LONG CURVED BOTTOM SHEET METAL PIECES ONLY (27"L)

RWD-0701-0111

RWD-0701-0112

RWD-600SCPC

RWD-600MCPC

RWD-600LCPC

Rollies Speed Shop – (07) 3252 5381