Jims Catalogue

TRANSMISSION DOOR BEARING TOOLS

Endorsed By

3 5

1

2

Endorsed By

8

5-SPEED TRANSMISSION SHAFT INSTALLER

6

9

7

4

This tool allows installation of transmission shafts with- out the use of a hydraulic or arbor press. For more details see No.2189-IS instructions. No. 2189 - Use on all 5-speed Big Twins and aftermar- ket 6-speed 1980-2006 except 2006 Dyna.

TRANSMISSION TRAP DOOR PULLER AND BEARING TOOL This tool will remove and replace the transmission door bearings H-D ® No.8998 or 8992. It can also be used to remove the transmission door for replace- ment without removing the complete transmission assembly. Door bearings must be replaced if using this tool to pull door off case. Replacement bearings; see page 104. *NOTE: Old No.1078-4 will not fit No’s 1077-2 or 1077-3. For more details see No.1078-IS instructions. No. 1014 - Use on all 5-speed Big Twins and aftermar- ket 6-speed 1980-2006 except 2006 Dyna.

20

PARTS AVAILABLE SEPARATELY

NO. QTY.

DESCRIPTION

PART NO.

1 1 2 2 3 6 4 1 5 6 6 1 7 1 8 1 9 1 10 1

BASE, PULLER AND INSTALLER

1014-1 1078-2

PILOT, INSTALLING (NO.8998) BEARING

TRANSMISSION ACCESS COVER PULLER TOOL

WASHER SCREW

1683 1024 1203 2000 2020

1

SOCKET HEAD CAP SCREW

Use to remove transmission access cover which is press fit on two dowel pins. For more details see No.95560-IS instructions. No. 95560-57 - Use on all Sportster ® 1954-85.

NUT

FLAT WASHER

PILOT, INSTALLER (NO.8992) BEARING PILOT, REMOVER (NO.8992) BEARING

1077-2 1077-3 1078-IS

INSTRUCTION SHEET

PARTS AVAILABLE SEPARATELY

NO.

QTY.

DESCRIPTION

PART NO.

1 2

1 1

SCREW

2130

INSTRUCTION SHEET

95560-IS

200