Jims Catalogue

TRANSMISSION DOOR BEARING TOOLS

NEW

NEW

1

3

2

3

1

2

5

4 7 6

H-D ® CRUISE DRIVE 6-SPEED TRANSMISSION DOOR REMOVER TOOL Use this tool to remove (pull) the complete door with gears and shafts from the transmission. No longer will you need to remove the trap door by prying or hitting with a hammer. Just prepare the trans for dis- assembly, bolt this tool to the outside of door, and place the two supplied press pins into the two screw holes of trans case. Thread in two of the screws, securing the door to case, and the door is pulled from case. Can be used with transmission in frame. For more details see No.984-IS instructions. No. 984 - Use on all 2006-present Dyna ™ and 2007- present FLHT & FXST.

H-D ® CRUISE DRIVE 6-SPEED TRAP DOOR BEARING REMOVER / INSTALLER This new innovative tool will accurately install a lubed ball bearing into the transmission trap door. Also removes bearing without error and can be performed on a work bench, no need for an arbor press. For more details see No.911-IS instructions. No. 911 - Use on all Twin Cam H-D 6-speed Cruise Drive models. 2006 Dyna's and all 2007 to present Twin Cam model

PARTS AVAILABLE SEPARATELY

NO. QTY.

DESCRIPTION LOWER PLATE UPPER PLATE

PART NO.

1 1 2 1 3 1 4 1 5 3 6 1 7 1

911-1 911-2

20

PARTS AVAILABLE SEPARATELY

INSTALLER PILOT

1077-2

SCREW

1024 1203 1065 1064

NO.

QTY.

DESCRIPTION SCREW, 1/4” DOWEL PIN TOOL PLATE

PART NO.

ALLEN SCREW 1/4-20 X 2"

1 2 3 4

4 2 1 1

2135

NUT 5/8-18

634

WASHER 5/8 SAE

984-1 984-IS

INSTRUCTION SHEET

Endorsed By

5-SPEED DOOR PULLER Use to remove Big Twin 5-Speed transmission door. This tool easily removes the transmission door, with gears and shafts attached and without any scratches or frustrations. Puller will not damage door bearing. For more details see No.2283-IS instructions. No. 2283 - Use on all 5-speed & aftermarket 6-Speed transmis- sions, including Twin Cam ® 1999-05 FXD, 1999-06 FL and 2000-06 FXST.

199