Jims Catalogue

FUEL INJECTION

NEW

5

1

2

FUEL PRESSURE TEST GAUGE TOOL This gauge is a must have JIMS ® new tool as 90% of all Big Twins motorcycles have Electronic Fuel Injection, (EFI). If you have a customer that is experiencing any of the following conditions: • Hesitation under acceleration • Loss of power • Back firing through the intake • Poor fuel economy • Stalling out • Engine turns over but will not start These are just a few symptoms that improper fuel system pressure may contribute to. This fuel pressure gauge is easily installed in line with the motorcycles fuel supply system. All fuel testing should be (if possible) performed with the engine running. JIMS ® supplies you with all the necessary hose connections and fittings to safely perform a fuel pressure test in about the same amount of time it takes to change a set of spark plugs. For more details see No.955-IS instructions. No. 955 - Use on all H-D ® models using EFI, includes V-Rod. PARTS AVAILABLE SEPARATELY NO. QTY. DESCRIPTION PART NO. 1 1 MAIN HOSES, VALVES &GAUGE ASSY 955-23 2 2 TANK CONNECTER ADAPTER 955-24 3 1 INSTRUCTION SHEET 955-IS

For 3/4” Hex Socket

For 3/8” Ratchet

No.1757

No.1758

12mm x 1.25

18mm x 1.5

JIMS THREAD CHASER FOR OXYGEN SENSORS

NEW

Use to remove any I.D. thread damaged from either exhaust carbon or the mating components, both in aluminum or steel. No. 1757 - Use on all 18mm 2006 to 2009 FLH also for all 2006 to present Dyna, FXST, XL and V-Rod O2 Oxygen Sensor in exhaust systems. No. 1758 - Use in 12mm spark plug holes from 1999 - later Twin Cam, 1986 and later XL and XR. Also Screamin’ Eagle EVO heads and 2002-later VRSC, use on 2010 –later, FLH O2 Oxygen Sensor on the exhaust sys- tems.

134