Jims Catalogue

THETIMKEN ® TOOL

TWIN CAM ® TIMKEN ® CASE BEARING CONVERSION TOOL

PATENT PENDING

14

4

4

19

2

13

1

18

3

15

8 6 5 12 11 10 7 9 17

16

This tool is a must for the big cubic inch late model Twin Cam ® engine builder. It may also be used to replace bearing for stock 88”, 96”, or 103” engines. Utilizing the special JIMS ® precision insert, it is designed to easily and accurately convert the left side crankshaft roller bearing (H-D ® No.24604-00D) to the more durable Timken ® Bearing (H-D ® No.9028). This insert is manufactured from aerospace quality steel that is several times stronger than the aluminum case material the stan- dard bearing rides in. For more details see No. 959-IS and 2246-IS instructions. The Tool Includes: • A new steel bearing insert held to under .0002”total indicator reading. See No.956

• A press plate No.959-2 that will hold the bearing insert in line with the case bearing bore at the time it is being pressed into case. • All the necessary drill bits to drill oil feed and return holes, hardware, and detailed instructions. • This job can be performed with normal hand tools, a hand drill, and a 2 ton press. No. 959 - Use on Twin Cam ® engines 2003-present. Order Timken ® bearings separately. For replacement insert sleeves see No.956.

3

1

2

TIMKEN ® REPLACEMENT SLEEVE This bearing insert kit is designed exclusively for use with JIMS ® tool No.959 shown above and must be installed only with this tool. The insert is made from aero space quality steel and has been designed to eliminate the center ring normally used between the bearings. This kit includes: bearing sleeve, mounting hardware, Loctite, and detailed installation instructions. For more details see No. 959-IS instructions. No. 956 - Bearing Insert kit. Must be used with JIMS ® tool No.959 on 2003 to present Twin Cam ® motors. No. 956K - 6 Pack of Bearing Insert kits.

PARTS AVAILABLE SEPARATELY

NO. QTY.

DESCRIPTION

PART NO.

1 1 2 1 3 1 4 1 5 2 6 1 7 1 8 1 9 2 10 1 11 4 12 1 13 1 14 1 15 1 16 6 17 1 18 1 19 1 20 1 21 1

TIMKEN ® BEARING INSERT (KIT # 956)

959-1 959-2 959-3 1721 1264 1713 1292 1714 1267 1234 2288 2165 959-4 2025 2246-4 2246-1

PRESS PLATE

BOTTOM LOCATOR PLATE

BIG TWIN PRESS INSTALLER PLUG

DRILL BIT

DRILL STOP COLLAR (USE ON #1721)

DRILL BIT

DRILL STOP COLLAR (USE ON #1713)

DRILL BIT

DRILL STOP COLLAR (USE ON #1714)

SCREW, 10-24 X 1-1/2 SHCS

ROLL TAP

BASE INSTALLER PROTECTIVE CASE

PARTS AVAILABLE SEPARATELY

TAP GUIDE

NO. QTY.

DESCRIPTION

PART NO.

SCREWS, FLAT PHILLIPS

1 1 2 6 3 1 4 1

TIMKEN ® BEARING INSERT SCREW, FLAT PHILLIPS

959-1 2025

#620 LOCTITE

1286-1362

SCREW, 3/8-16 X 2-1/2 SHCS

1128 1698

TAP MAGIC

#620 LOCTITE

1286-1362

INSTRUCTION SHEET INSTRUCTION SHEET

959-IS

INSTRUCTION SHEET

2246-IS

2246-IS

133