FEULING® FUEL INJECTORS
Part # 9941 Part #9947 Quality OEM replacement and high flow top feed fuel injectors compatible with standard gasolines. Injector flow rate is measured at 4 bar/58PSI. High flow injectors for race application use only. All injectors are flow tested, sold individually. Part #9946 Part #9943
EV-1 Minitimer square type connector: Fits Twin Cam, Sportster and V-Rod
Part # 9946 Fuel injector 3.8 g/s , Direct fit '07 - Later XL engines. Injectors are an OE replacement, delivering fuel at 3.8 grams per second with a 4 hole cone spray pattern. Recommended for stock to mild performance engines. Injector has EV-1 Minitimer square type connector. Replaces factory IWP181/B, OEM # 27706-07/A Fuel injector 4.3 g/s , Fits OE 46mm Cable Drive, OE 50mm ETC, SE 43mm Cable drive. Injectors are an OE replacement, delivering fuel at 4.3 grams per second with a 4 hole cone spray pattern. Recommended for stock to mild performance engines making under 95 horsepower to the rear wheel. Injectors also fit performance XL engines looking for a higher flow rate. Injector has EV-1 Minitimer square type connector . OEM #27609-01B Fuel injector 5.1 g/s , Factory OE VRSC engines as well engines needing a higher flow rate injector than stock. Great performing injector for XL and T/C engines with mild cylinder head work and increased compression ratios. OE replacement injector delivering fuel at 5.1 grams per second. Recommended for stock VRSC to mild/medium performance XL and T/C engines making over 95 horsepower to the rear wheel. Injector has EV-1 Minitimer square type connector , replaces factory IWP063/B, OEM # 27665-01/A Fuel injector 5.7+ g/s . This high flow injector has a linear and controllable flow rate which will meet and exceed the demands of high performance engines needing a high flow rate without sacrificing idle and low speed driveability. Fits engines with the EV-1 Minitimer square type connector. Replacement injector for SE kits '08 - Later touring w/Electronic Throttle Control (ETC), including SE 58mm throttle body and SE high flow oval port intake manifold. Injectors provide 25%+ more fuel than the OE injectors, delivering fuel at 5.7+ grams per second with a 13 degree cone spray pattern. Recommended for performance engine combinations making more than 110 rear wheel horsepower. For RACE application ONLY. Replaces Screamin Eagle IWP 029B, OEM #27617-08 HIGH FLOW INJECTOR Part # 9947 Fuel injector 8.2 g/s , Fits Destroyer VRSCX as a OE replacement and engines requiring extreme flow injectors using the EV-1 Minitimer square type connector. Delivering fuel at 8.2+ grams per second rated at 3 bar with a 26 degree cone spray pattern. Recommended for high performance engine applications. For RACE application ONLY. Part # 9941 Part # 9948 Part # 9943
NOTE: Some of FEULING's products: namely Camshafts and High Flow Fuel Injectors ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES. The following disclaimer is associated with these FEULING products.
DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Made with FlippingBook HTML5