Feuling Catalogue

FEULING® PRESSURE RELIEF SPRING/VALVE REMOVAL TOOL

This tool makes for easy removal and installation of the pressure relief spring, by-pass valve and roll pin in the Twin Cam camplate. The tool is used to hold the relief spring down and away from the roll pin. Fits all Twin Cam® engine camplates. Made in the U.S.A.

Part # 9000 Fits: All T/C camplates '99-'16, Feuling, HD, SE, Delkron, Speeds Part # 9001 Fits: Milwaukee Eight Oil Pumps

FEULING® PRESSURE RELIEF PSI TEST TOOL

Part #: 9000, 9010

Part #: 9010

Multi view #: 9000, 9010

Part # 9011

These pressure test tools are must haves for any H-D® Twin Cam and Milwaukee Eight engine builders. Bench test each camplate on T/C and oil pump for the Milwaukee Eight before installation, cycle the pressure relief valve, testing operation and assuring the valve moves freely, seats and seals each time, any leakage at the relief valve will reduce oil pressure. This tool allows the engine builder to know what PSI the relief valve opens; the spring tension can be adjusted to achieve the desired pop off PSI. Tool includes: air regulator, 0 – 100 psi pressure gauge, gasket & needed hardware, fits all Twin Cam engine camplates. Feuling® recommends the camplate/oil pump valve be seated and sealed 0-30 psi with full pop off at 55-60 psi. Made in the U.S.A.

Proper relief valve seal will insure good hot idle oil psi and reduce oiling system cavitation and related issues.

Part # 9010 Fits: All T/C camplates '99-'16, Feuling, HD, SE, Delkron, Speeds Part # 9011 Replacement gasket for tool #9010

Part # 9006 Fits: Milwaukee Eight '17 Oil Pumps

REAMER FOR T/C CAMPLATE RELIEF VALVE BORE

Engine builders can use this reamer to perform a 'valve job' on the pressure relief valve seat of all T/C engine camplates, factory & aftermarket. Best used in conjunction with Feuling pressure test tool #9010, lightly machine (clean) the camplate relief valve seat and re- seat the plunger valve. Feuling recommends installing a new relief plunger valve - See Feuling #8002 or #8004.

Part # 9008

Reamer for T/C camplate and Milwaukee Eight oil pump pressure relief valve

61