Feuling Catalogue


 FEULING® HIGH FLOW camplates for Milwaukee Eight engines increase engine oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including increasing the scavenge return holes from the pump to the camplate and into the engine case. This camplate also matches the oil port holes throughout the camplate to the port holes in the engine case increasing engine oil flow to the lifters, piston cooling jets, crankshaft, rod bearings, oil cooler and oil tank resulting in 15-25 degree cooler engine temperatures and 20-30 cooler oil temperatures.  Made from 7075 billet aluminum which is 50% harder and stronger than the factory cast and Feuling OE+ camplates. The 7075 increases the strength and hardness of the camplate, holding tighter tolerances under temperature eliminating flexing and the need for bronze bushings as 7075 material has excellent bearing like properties.  FEULING® HIGHFLOW camplates are blue printed and matched to the Feuling® HP+® and RACE SERIES® oil pumps, which allow the Milwaukee Eight® engine to take full advantage of the increased volume from the high flow oil pumps resulting in cooler quieter engine operation.  When matched with the Feuling® Race Series Oil Pump rear wheel power gains of 2 Horsepower and 2 ft/lbs of Torque are achieved.  For use ONLY with the Feuling® HP+ and RACE SERIES Milwaukee Eight oil pumps  Bolts into stock location  Made in the U.S.A.

Part # 8017 HIGH FLOW CAMPLATE Fits Milwaukee Eight '17, Fits: Chain and Gear Drive camshafts for use ONLY with FEULING HP+ OR RACE SERIES oil pumps, gear drive cam requires block off plate.


Made with FlippingBook HTML5