Chris Products Catalogue

Serving the motorcycle trade for 30 years Voice: 503 645 6500 Fax: 503 645 8500 Toll free: 1 800 628 1256 E-mail: sales@chrisproducts.com

H.D., FX, FXR,Fsd,Fxds,Fxwg,Xl,Fat Boy,Sporsters,Fxstd, Fxstf, Fxsts,Dyna are registered trade marks of the Harley Davidson Corporation. These stated items and OEM numbers are for reference only.

License plate frames.

License plate reflectors by the tub. Available in amber, green, blue, and red.

Part no: 0600 Chrome license plate packaged in clamshell 0601 Chrome license plate/4 amber reflectors 0602 Chrome license plate/4 red reflectors 0603 Chrome license plate/4 blue reflectors 0604 Chrome license plate/4 green reflectors 0610 Black license plate in clamshell 0611 Black license plate/4 amber reflectors 0612 Black license plate/4 red reflectors 0613 Black license plate/4 blue reflectors 0614 Black license plate/4 green reflectors

Sold in tubs of 150 and 40.

Part no: CH150R CH150A CH150B CH150G CH40R CH40A CH40B CH40G

Tub of 150 red reflectors Tub of 150 amber reflectors Tub of 150 blue reflectors Tub of 150 green reflectors Tub of 40 red reflectors Tub of 40 amber reflectors Tub of 40 blue reflectors Tub of 40 green reflectors

Part no: 0620 Inspection plate used in states that require inspection stickers to be placed in a visible area.

Attractive packaging !!

Part no: CH4R 4 red reflectors/pkg. CH4A 4 amber reflectors/pkg. CH4B 4 blue reflectors/pkg. CH4G 4 green reflectors/pkg.

Part no: CHB 100 License plate fasteners. Available in the bulk. 100 fasteners per pack.

2 1/2 " round reflectors Available in red and amber Stud and nut or adhesive back Part no: RR1A (amber, stud/nut) RR1R (red, stud/nut) RR2A (amber, adhesive back) RR2R (red, adhesive back)

Blue Dots Part no: 0530 (Acrylic) bulk 0530-4 (Acrylic) 4 pack 0550 (Glass) bulk 0550-2 (Glass) 2 pack

voice: 503 645 6500

fax: 503 645 8500

Harley Davidson turn signal units/lenses

Replacement lenses DHD1A DHD1R

Early style single filament turn signal units with Chris U.S made lenses. Replacement units for FX,FXR, and Sportster® models from1973 to 1985 Part no: 0001A Amber lamp unit with threads. OEM 68513-73 0002A Amber unit without threads. OEM 68515-77A Late style dual filament turn signal units with Chris U.S. made lenses. Replacement for bikes 1986 up. Part no: 0003A Amber lamp without threads. OEM 68394-86 0004A Amber lamp with threads. OEM 68406-86

Lenses shown below fit the 0003A, 0004A, 8407A, and 8410A

DHD2R (red)

For FXD models 1993 up (except FXDS), FX Softail® models late 1987 thru 1994, FXWG 1986, XL 1986 thru 1989 (OEM 68407-86). Ground wire included. Chris lenses. Part no: 8407A Rear turn signal unit. Single filament with amber lens.

DHD2S (smoke)

DHD2A (amber)

For FXDS 1991 up. All FXD models 1991 thru 1992, FL Softail® models early 1987 thru 1990, FAT Boy models 1990 thru 1994, FXR late 1987 thru 1994 (except FXRT), and XL models 1990 thru 1994. Replacement for O.E.M 68410-87B. Ground wire included. Chris lenses. Part no: 8410A Rear turn unit. Single filament with amber lens.

DHD2C (clear)

fax: 503 645 8500

voice: 503 645 6500

Harley Davidson turn signal units/lenses

Replacement lenses for the 8400A, 8402A

Late FL dual filament unit com- plete with Chris U.S. made lense and mounting screws. Part no: 8400A Complete unit with amber lens.

DHD4R (red)

DHD4C (clear)

Late FL single filament turn signal unit with Chris U.S. made lenses and mounting screws. Part no: 8402A Complete unit with amber lens.

DHD4A (amber)

DHD4S (smoke)

Replacement lenses

Custom style flat lens turn signal assembly de- signed to use standard full size turn signal bulbs. This unit will adapt to virtually all H.D. motorcyles. Part no: 8431A Flat amber lens turn signal unit. Single filament bulb. Ground wire. 8395A Flat amber lens turn signal unit. Double filament. Ground wire. The above units are also available in kit form. Kit no: 8432 includes the following: (2) 8395A dble filament turn signals, amber lenses and (2) 8431A single filament turn signals with amber lenses.

DHD3R DHD3A

DHD3C DHD3B

Stand-off used with front FL's turn signals

Directional signal mounting kit for front turn signals

Handlelbar clamp for front turn signals. Stainless steel mounting screw included.

1986 to present. Replaces OEM 68519-69.

for most H.D. motorcycles.

Part no: 0519

Part no: 8185

Part no: 0487

voice: 503 645 6500

fax: 503 645 8500

Harley Davidson Turn Signal Kits

Kit no: 0005 Includes 4 Chris no. 0004 (OEM 68406-86) complete turn signal assemblies with amber lenses, double filament bulbs. 2 Chris no. 0487 (OEM 68487-82) handlebar clamps with screws. 2 Chris no. 0477 (OEM 68477-73) bracket to lamp. 2 Chris no. 0480 (OEM 68480-73) rear support with screw. Plus a bonus of 2 DHD2R (red lenses).

Kit no: 0006 This kit fits FX,FXR, and Sportsters® 1973 to 1985. Includes 4 Chris no. 0001 (OEM 68514-73) turn signal as- semblies with amber lenses and single filament bulbs. 2 Chris no. 0487 (OEM 68487-82) handlebar clamps with screws. 2 Chris no. 0477 (OEM 68477-73) bracket to lamp. 2 Chris no. 0480 (OEM 68480-73) rear support with screw. Plus a bonus of 2 DHD1R (red lenses).

Kit no: 0010 for late model FL,s. Includes 4 Chris no: 8400A complete turn signal assemblies. Chris amber lenses (DHD4A), double filament bulbs, mount- ing screws, 2 light brackets. Plus a bonus of 2 DHD4R (red lenses). Kit no. 0011 for late model FL’s. Includes 2 Chris 8400A turn signal assemblies, Chris amber lenses (DHD4A), double filament bulbs, 2 light brackets with mounting screws. Also includes 2 Chris 8402A turn signal assemblies, Chris amber lenses (DHD4A) with single filament bulbs. Plus a bonus of 2 DHD4R (red lenses)

fax: 503 645 8500

voice: 503 645 6500

For H.D. models (same size as OEM Deuce turn signals, but in LED)

Part no: 8500A-LED (clear LED that emits amber with amber lens). Part no: 8500R-LED (clear LED that emits red with red lens). Part no: 8500C-LED-A (clear LED that emits amber with clear lens). Part no: 8500C-LED-R (clear LED that emits red with clear lens.

Part no: 8501A - LED (with amber lens) Part no: 8501R - LED (with red lens) This LED bullet light utilizes clear LED's that emit amber or red. Can be installed with mounting studs shown on page 10.

Part no: 8887C-LED-R

This bullet light is the same as HD OEM 8977 but with LED's. Utilizing LED's that emit red allowing the use of a clear lens. Attaches with part no: 8821 shown on page 10.

Replacement bullet light lenses

DHD5R (red) DHD5C (clear) DHD5A (amber) DHD5S (smoke)

LED light bar with stop,turn, and running light functions.

Part no: 0988R (red led's with red lens) Part no: 0988C (red led's with clear lens)

► Stop, turn, and running light functions ► Red l.e.d's with white lens ► Water proof sealed ► Meets D.O.T. standards ► Size: 15 1/2 " x 1 5/8"

voice: 503 645 6500

fax: 503 645 8500

Harley Davidson turn signal units

Part no: 8500A (amber)

Double filament chrome bullet light. Mainly used for front turn signals on late model H.D.'s. Installed by using parts no: 0487, 0477 or 8185 shown on page 10.

Part no: 8501A (amber) Part no: 8501R (red)

Double filament chrome bullet light. Same as 8500 series but wiring through the mounting hole. Installed with stud series shown on page 10.

Part no: 8887A (amber) Part no: 8887R (red)

Same as H.D. OEM # 68977 except the unit is double filament. Attaches with part no: 8821 shown on page 10,

fax: 503 645 8500

voice: 503 645 6500

Harley Davidson turn signal units in black chrome

Black Nickel

Part no: 8500A - BN (amber lens) Part no: 8500R - BN (red lens)

Same as 8500 series but with black nickel housings (double filament).

Black Nickel

Part no: 8501A - BN (amber lens) Part no: 8501R - BN (red lens)

Same as 8501 series but with black nickel housings (double filament). Normally installed with part no: 0495-2BN shown on page 10.

Black Nickel

Part no: 8887A - BN (amber lens) Part no: 8887R - BN (red lens)

Same as 8887 series but with black nickel housings (double filament). Installed with part no: 8821-BN shown on page 10.

voice: 503 645 6500

fax: 503 645 8500

Harley Davidson bullet light turn signal kits

Kit no: 8502 Includes two (2) 8500A, amber lenses and double filament bulbs and two (2) 8501A, amber lenses and double filament bulbs. Plus two (2) 0495 studs.

Kit no: 8504 Includes two (2) 8500A, amber lenses and double filament bulbs and two (2) 8501A, amber lenses and double filament bulbs. Plus two (2) DHD5R red lenses and two (2) 0495 mounting studs.

Kit no: 8503 Includes four (4) 8500A, amber lenses and double filament bulbs. Plus two (2) DHD5R red lenses.

Replacement bullet light lenses DHD5R (red) DHD5C (clear) DHD5A (amber) DHD5S (smoke)

fax: 503 645 8500

voice: 503 645 6500

Gaskets and O'Rings Chris Part no: Sold in: 0025-10 (OEM #68455-86) O-Ring 10/pack (Fits Chris housings #0003,0004,8407,8410) (Fits OE#68404-86,68406-86,68407-86, 68410-87B) 0026-10 (OEM #68451-86) O-Ring 10/pack (Fits Chris housings #8400,8402) (Fits OE#68402-86,68440-86) 0023-10 (OEM #68481-73) Gasket 10/pack (Fits OE#68513-73,68515-77A) 0024-10 (OEM #68521-63A) Gasket 10/pack (Fits early FL housings)

Taillight lens screws (OEM #68026-73) Chris part no:

Sold in: per screw 10/pack

0020

0020/10

Taillight lens gasket (OE #68025-73T,68027-90) 0021 per gasket 0021/10 10/pack

Speed nuts (OEM 7501) 0022

per nut 10/pack

0022/10

voice: 503 645 6500

fax: 503 645 8500

10

Part no: DHD1A Amber early style (OEM 68483-75) DHD1R Red early style DHD2A Amber late style (OEM 68457-86)

H.D. Replacement lenses

DHD2R Red late style DHD2C Clear late style DHD2S Smoke late style

DHD3A Amber early FL (OEM 68571-63A) DHD3R Red early FL (OEM 68570-63) DHD3C Clear early FL DHD3B Blue early FL (police use only) DHD4A Late FL (68440-86) DHD4R Red late FL

DHD2R (red) DHD2S (smoke) DHD2A (amber) DHD2C (clear)

DHD4C Clear FL DHD4S Smoke FL DHD5A Bullet lens amber DHD5R Bullet lens red DHD5C Bullet lens clear DHD5S Bullet lens smoke Lenses with blue dots installed.

DHD3R (red) DHD3A (amber) DHD3C (clear) DHD3B (blue)

These lenses are identical to the ones listed above but with blue dots installed. The order numbers are the same except a letter B is placed after the order number such as DHD- 1AB or LHD1B. Bullet lenses are not availble with blue dots installed. Keep in mind that lenses installed with blue dots may not be legal in some states. Check with your local authorities before installing them on your bike.

DHD4R (red) DHD4C (clear) DHD4A (amber) DHD4S (smoke)

DHD5R DHD5C DHD5A DHD5S (red) (clear) (amber) (smoke)

DHD1AB DHD1RB DHD2AB DHD2RB

DHD1A DHD1R

DHD3AB DHD3RB DHD4AB DHD4RB

Part no: Acrylic 0530 (bulk packed)

0530-4 (4 per display pack)

Glass 0550 (bulk packed)

Part no: LHD-1B Same as LHD-1 with blue dot installed.

Part no: 8048 Complete taillight for H.D. 1973 to 1998.

Part no: LHD-1 Repl. lens for H.D. 1973 to 1998.

0550-2 (2 per display pack)

fax: 503 645 8500

voice: 503 645 6500

11

H.D. OEM replacements

Part no: 0480 Rear turn signal support with stainless steel mounting screw. Replaces: OEM 68480-73.

Part no: 0487 Handlebar clamp for front turn signals. Stainless steel mounting screws.

Part no: 0477 Fits between handlebar clamp (0487) and lamp. Replaces: OEM 68477-73.

Part no: 0519 Stand-off for front FL’s turns ‘68 to present. Replaces: OEM 68519-69.

Part no: 0489 Directional stand-off. Re- places OEM 68480-93 for Sportster ‘94,’95 and Dyna models.

Part no: 0104 Screw type device necessary to install standoff part no: 0489. Replaces OEM 56104-94.

Part no: 8821 Chrome support for turn signal no: 8887A shown on page: 2. Used on Softail models FXSTD, FXSD1 year 2000 up. Supplied with mounting screw.

Part no: 8821-BN This part is the same as part no: 8821 shown on the left only in black nickel. Supplied with mounting screw.

Part no: 0528 Stud with chrome spacer. OEM 68528-77A

Part no: 8480 OEM #68480-02

Support for t/s 8887A. Used on models FXSTI, FXSTF1, FLSTS1, FX- STB1. Supplied with mounting stud.

Part no: 0495-2 0494-2 0493-2

Body length

Part no: 0531-4 1/4” chrome spacers/4 pack 0532-2 1/2” chrome spacers/2 pack 0533-2 3/4” chrome spacers/2 pack 0534-2 1” chrome spacers/2pack 0535-2 1 1/4” chrome spacers/2 pack 0536 5 piece assortment one of each All have the same O.D. and I.D. O.D. is 0.685 I.D. is 0.4150

5/8"

1 1/4"

1 7/8" These parts are sold in pairs of two. The fine threads are 5/16 - 24. The course threads are 3/8-16.

Part no: 0495-2BN This part is the same as part no: 0495-2 but in black zinc. Sold in pairs of two.

Part no: 8185 Directional signal mounting kit for front turn signals for most H.D. motorcycles.

voice: 503 645 6500

fax: 503 645 8500

12

Halogen Lights

Part no: 0734 Halogen light (H3 55w 12v). Adjustable mounting bracket.

Part no: 0733 Halogen light (H3 55w 12v). Size: 2 3/4 x 2 1/2". Adjust- able mounting bracket.

Part no: 0715 Complete kit includes two 12v 35 watt halogen lights. Size: 4" x 3". Fused line, push-pull switch. Supply of end terminals.

Part no: 0820 Halogen light (H3 55w 12v). Aluminum diecast body/silver. Chrome retaining band. Metal adjustable mounting brackets.

Part no: 0787 Halogen light (H3 55w 12v). Size: 3 inches in diameter. Adjustable mounting bracket.

Part no: 0984-2 (set of 2) Die cast aluminum housing. Multi-surface reflector. Crystal clear glass lens. Black metal mounting bracket. Size: 6.5" x 2.75" x 4.0" deep. Halogen bulb H3 12v 55 watt.

Part no: 0899 General Electric 35w seal beam light #4411 with rubber housing. Size: 4 3/4" x 5 13/16" x 3".

Part no: 0779 Halogen 12v 35watt halogen light that can be used for a work light or driving light. Complete with shock mount chrome band with rubber inserts that fit a bar up to 1 1/8" in diameter. Lamp size: 4" x 3 1/8". A natural for off road vehicles.

Part no: 0985-2 (set of 2) Hi-impact plastic housing. Multi-surface reflector. Clear glass lens. Black metal mounting bracket. Halogen bulb H3 12v 35 watt. Replacement yellow bulb (part no: 0986) Size: 5.75" x 2.75" x 3.50" deep.

Part no: 0716 (repl. lens).

fax: 503 645 8500

voice: 503 645 6500

13

Universal lighting used on trucks, trailers, forklifts etc.

Part no: 0926 (complete unit) 0903R (light only) 0912 (3 pin connector only) 0905 (grommet only)

Part no: 0927 (complete unit)

Part no; 0925A (amber) 0925R (red) 0762 (repl. bulb)

0903R (light only) 0911 (flange only) 0912 (3 pin conector only)

Clearance marker lights with two bulbs. Size: 4" x 2" x 1.13". Body high impact plastic.

Color: red. Bulb: 12.8 double filament. Size: 4" in diameter. Sealed stop,turn, taillight. Body polycarbonate. Priced with light,grommet, and 3 pin connector.

This is the same as the unit shown on the left, but with a flange mount.

Part no: 0917A (amber) 0917R (red)

Part no: 0904A (amber light,grommet,connector) 0904R (red light, grommet, connector) 0916A (amber light only)

Part no: 0928 (complete unit) 0907R (light only) 0910 (grommet only) 0912 (3 pin connector)

Sealed single marker light with chrome base. Available in red or amber. Includes pigtail. Size: 2.50" x 1.25 " x 0.75". Lenses are polycar- bonate.

0916R (red light only) 0924 (grommet only) 0923 (two pin connector)

Sealed stop,turn,taillight . Body Poly- carbonate. Color red: Bulb 12.8 (double filament. Size: 6.50 x 2.25" x 2.38. Priced with light, grommet, and connector.

Sealed clearance marker lights. Size: 2" x 0.75". Body: high impact plastic.

Need extra connectors ?

2 pin connector Part no: 0923

Part no: 0921 (amber light, grommet, connector) 0919A (amber light only) 0924 (grommet only) 0923 (two pin connector only)

Part no: 0714A (amber, single wire) 0714R (red,single wire) 0814A (amber, two wire) 0814R (red, two wire)

Sealed round dome clearance light. Color: amber. Size: 2" x 1.77". Body: high impact plastic.

Sidemarkers available in red and amber. Chrome base. Size: 3/34" x 2 1/4". Two wire allow for a ground when installed on a non-conductive base.

3 pin connector Part no: 0912

voice: 503 645 6500

fax: 503 645 8500

14

Univeral LED lighting used on trucks, trailers, forklifts etc.

Part no: 0869A-1 Part no: 0869R-1

Part no: 0960-1

The two items shown above have ten Super LEDs. Both are 4 inches in diameter. The red unit serves as stop,turn, and taillight. The amber unit serves as park and signal light. Price includes taillight, grommet, and 3 pin connector.

15 Super diode LED. Hi/Low filaments. 5.25 x 3.37 x 1.87. Complete with grom- met and pigtail.

Part no: 0879A-1 Part no: 0879R-1

Part no: 0917A-LED (amber) Part no: 0917R-LED (red) Marker lights with chrome base. Two pin connector included.

The two items shown above have ten Super LEDs. Both are 6 inch (oval). The amber unit serves as park and signal light. The red unit serves as stop, turn, and taillight. Price includes taillight, grommet, and 3 pin connector.

Part no: 0883

Part no: 0877

Part no: 0881

Part no: 0882

License plate bracket used with part no: 0881 shown on the left.

15 diode LED triangle light. Voltage: 8-14 VDC. Size: 2 3/4" x 3 1/2".

Part no: 0814R-LED (red) Part no: 0814A-LED (amber) LED sidemarkers. Chrome base. Size: 3 3/4" x 2 1/4".

9 Super LED trailer light with 4 LEDs for license plate illumina- tion. Size: 4 1/4" in dia.

9 Super LED trailer light without license plate illumination. Size: 4 1/4" in dia.

Showing part no: 0851 as complete unit.

Part no: 0851

Photos showing part numbers 0881 and 0883.

Complete unit including metal bracket (0852), light with rubber grommet (0960-1) and three pin connector (0912).

fax: 503 645 8500

voice: 503 645 6500

15

switches of all types

Part no: 0705 Push-pull switch without headlight emblem. Screw terminals. 12v/15 amp. DC. Requires 5/16" mount- ing hole. Stem length: 7/32". Part no: 0743 Push-pull switch with headlight emblem. Blade terminals. 12v/15 amp. DC. 15/32" mounting hole. Stem length: 3/8".

Part no: 0940 75 amp push-pull switch with screw terminals. 12v. DC. Requires 29/64" mounting hole. Stem length: 5/8".

Part no: 0726 Fused 12v/30 amp DC

Push-pull switch with screw terminals. Three positions. Requires 3/8" mounting hole. Stem length: 1/4".

Part no: 0727 Chrome toggle switch. 12v/15 amp. DC. Requires 7/16" mount- ing hole. Stem length: 1/4".

Part no: 0958 Push-pull switch with headlight emblem. Screw terminals. 12v/10 amp. DC. Requires 5/16" hole. Stem length: 3/16".

Part no: 0740 Push-pull switch with headlight emblem. Screw terminals. 12v/15 amp. DC. Requires 3/8" mounting hole. Stem length: 5/16".

Part no: 0777 Fused 12v/30 amp. DC push-pull switch with screw terminals. Chrome knob. 1/2" mounting hole. Stem length: 19/32". Part no: 0953 Push-pull switch. Illuminates red when activated. 12v/10 amp. DC. Blade terminals. Requires 1/2" hole. Stem length 3/32". Part no: 0954 Push-pull switch. Illuminates blue when activated. 12v/10 amp. DC. Blade termi- nals. Requires 1/2" hole. Stem length 3/32" Part no: 0957 Push-pull switch with headlight emblem. Screw terminals. 12v/10 amp. DC. Requires 5/16" hole. Stem length: 9/16".

Part no: 0736 Momentary switch. 12v/15 amp. DC. Chrome button. 9/16" mount- ing hole. Stem length: 11/16"

Part no: 0956 Push-pull switch with screw terminals. Illuminates blue when activated. 12v/30 amp. DC. Re- quires 1/2" mounting hole. Stem length: 5/16". Part no: 0955 Push-pull switch with blade terminals. Illuminates red when activated. 12v/30 amp. DC. Re- quires 1/2" mounting hole. Stem length: 5/16"

Part no: 0778 Rocker switch with blade ter- minals. Illuminates red when activated. 12v/15 amp. DC.

voice: 503 645 6500

fax: 503 645 8500

16