TTS Catalogue

TTS

Power You Can Bank On! TM Inc.

The TTS MasterTune System includes three powerful Windows-based programs (MasterTune HD, DataMaster HD & VTune) designed specifically to tune Harley-Davidson Motorcycles. MasterTune-HD is an ECM reprogramming tool for H-D bikes that utilize the diagnostic interface. MasterTune-HD also supports 2005 and later Retrofit ECM Service Modules when installed on earlier vehicles. DataMaster-HD is a data collection tool specifically for use with 2001 and later Delphi equipped H-D motorcycles that utilize the diagnostic interface. VTune is an easy-to-use VE table tuning tool tailored specifically for use with 2006 and later Delphi-equipped H-D’s that are equipped with O2 sensors. With the MasterTune System, you can: • Calibrate factory speedometers • Correct cruise control and 6th gear light (Primary Ratio Correction) issues • Trims spark tables automatically while correcting the fuel system • Analyse the engine’s actual volumetric efficiency • Reduce tuning time for a smoother running, more responsive engine • Check and clear diagnostic codes • Save and restore the current calibration in the ECM (factory or other) • Install custom calibrations from other sources • Compare functions quickly in tables • Choose from a wide selection of base mapsGraph in 2D, 3D or line options • Display all vehicle data as well as various calculated channels • View real-time engine parameters • Record data without a computer and up to 8 hours in total • Store up to 64 recordings • Automatically start/stop recordings • The TTS MasterTune software is compatible with both 32 and 64-bit versions of Windows XP and Windows 7 • Cables sold separately • Made in the USA COMMUNICATIONS INTERFACE (SINGLE BIKE - BLUE) MASTERTUNE Manufacturer Part Number TTS-2000008

T

TS

ACCESSORIES

CAN 6 PIN CABLE KIT

Manufacturer Part Number TTS-2000011A

Includes the following cables: • Data Link Connector to Communications Interface (2000015A) • USB 2.0 A-to-B cable to connect your PC/laptop to the Communications Interface

Supported Models: • Softail models 2011-present • Dyna models 2012-2017 • Sportster models 2014-present • Touring models 2014-present • Street models 2015-present

J1850 4 PIN CABLE KIT

Manufacturer Part Number TTS-2000014

Includes the following cables: • Data Link Connector to Communications Interface (2000009) • USB 2.0 A-to-B cable to connect your PC/laptop to the Communications Interface

Supported Models: • Softail models 2001-2010 • Dyna models 2004-2011 • V-Rod models 2002-2017 • Sportster models 2007-2013 • Touring models 2002-2013

When used for calibration development, this interface marries to the ECM during the first ECM flash and further calibration development can only be performed on that ECM. USB TO SERIAL CONVERTER Manufacturer Part Number TTS-2000006 TS T

TTS

Power You Can Bank On! TM Inc.

Proudly distributed in Australia & New Zealand by Rollies Speed Shop.