S&S-Royal-Endfield-2023

First page 1 Next page Last page

PERFORMANCE PARTS FOR ROYAL ENFIELD ® 650 TWIN October 2023

S&S is proud to support Royal Enfield's Build/Train/Race program and the women that have taken these bikes to new levels on dirt and asphalt.

The Qualifier is an aggressively styled 2-1 race replica exhaust system built for 2019–2021 RE 650. Crafted from brushed stainless steel, it's as durable as it is good looking and sheds a full 28 lbs over the stock system. More importantly it bumps horsepower 12% and torque 7% while emitting a deep race note that's just as happy on the track as it is on the street.

• Aggressive 2-1 race styling • Shed 28 pounds while improving performance and sound • 12% increase in peak hp and 7% increase in torque (when combined with S&S high flow air filter) • Low mount 2-1 • Durable all Stainless Steel construction Q u alifier 2-1 Exha u st System for RE 650 Twins

304 SS Header Construction

High Flow Perforated Baffle Wrapped in High Performance Race Spec Insulation Creates a Deep Performance Sound

Ceramic Blanket Insulates High Flow Catalytic Converters

Removable dB Reducer

Spring Mount Race Style Muffler

2018 Royal En eld ® 650 Twin

Stock HP 39.85 TQ 36.55

S&S HP 44.76 TQ 39.21

5 3000 3500 4000 4500 5000 5500 6000 6500 7000

RPM

Part # Description 550-1029A 50 State Qualifier 2-1 Performance Exhaust System for Royal Enfield® 650 Twins 550-1031 * Race Only Qualifier 2-1 Performance Exhaust System for Royal Enfield 650 Twins Quali er 2:1 Exhaust System & Air Cleaner Kit

Exempt from emissions tampering regulations under CARB EO# K-010-19 for all 2019-2021 Royal Enfield 650 Twin Models * FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY. NOT LEGAL FOR SALE OR USE NATIONWIDE ON ANY FEDERAL POLLUTION CONTROLLED MOTOR VEHICLE UNDER THE CLEAN AIR ACT.

Now Available in Guardian Black!

2023 NEW FOR

Tapered Cone Slip-ons for RE 650 Twins

• Improved horsepower & torque • Brushed Stainless Steel Finish • Removable dB reducer • Deep performance exhaust note • Durable all Stainless Steel construction Stock--------------- 22.4 lbs (10.1 kg) Street---------------10.8 lbs (4.9 kg) Race Only----------9.0 lbs (4 kg) • CARB EO# K-010-9

Smooth One-Piece Styling & Brushed Stainless Steel Finish

Removable dB Reducer

S&S Engineered High Performance Catalytic Converter

Tapered End Styling w/Smooth Formed End

Stainless Steel Perforated Baffle Core

Part # Description 1740024/B 50 State Stainless Slip-On Set for Royal Enfield® 650 Twins (available exclusively through RE dealers in North America) 550-0770 * Race Only Stainless Slip-On Set for Royal Enfield 650 Twins 550-1101 Race Only Guarian Black Slip-On Set for Royal Enfield 650 Twins Exempt from emissions tampering regulations under CARB EO# K-010-27 for all 2019-2022 Royal Enfield 650 Twin Models * FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY. NOT LEGAL FOR SALE OR USE NATIONWIDE ON ANY FEDERAL POLLUTION CONTROLLED MOTOR VEHICLE UNDER THE CLEAN AIR ACT.

Air Filter— • High Flow air cleaner, flows 12% better than stock (34.7cfm vs. stock 30.9cfm) • Washable, no more replacing dirty air filters • Easy to install Cover Eliminator— • High Flow performance. 95% increase in flow, when paired with the S&S air filter (60.4 cfm vs. stock 30.9 cfm) • Made from durable stainless steel 650 Twin Air Filter Features

Part # Description 170-0601A High Flow Replacement Air Filter for Royal Enfield® 650 Twins 170-0603A High Flow Air Intake Eliminator Plate Kit for Royal Enfield 650 Twins

Exempt from emissions tampering regulations under CARB EO# D-355-34 & Exempt from emissions tampering regulations under CARB EO# D-355-35

High Performance Cam

Intake

Open

Close Duration Lobe Center

1° BTDC 35° ABDC 216

107

Exha u st

Open

Close Duration Lobe Center

32° BBDC 10° ATDC

222

101

High lift and longer duration cam builds power sooner in the RPM range and holds it for longer. The new S&S cam for the 650 Twin uses the stock adjustable timing sprocket to allow you to dial in the power curve to match your riding style.

Part # Description 330-0709

High Performance Camshaft Kit with Shims for Royal Enfield® 650 Twins

750cc Big Bore Kit Stock

750 Kit

Bore x Stroke

78 x 67.8mm 83.5 x 67.8mm

Compression Ratio

9.5:1

11.0:1

865 cc Big Bore Kit Stock

865 Kit

Bore x Stroke

78 x 67.8mm 90 x 67.8mm

Compression Ratio

9.5:1

11.0:1

High compression pistons feature a 7 cc raised dome to achieve a compression ratio of 11:1 (from 9.5:1). Higher compression is a key factor in increasing performance.

Part # Description 920-0143

High Compression 11:1 Piston Kit for Royal Enfield® 650 Twins

920-0144 750 cc Big Bore Kit for Royal Enfield 650 Twins

(includes pistons, rings, pins, & sleeves. Requires machine work.) 865cc Big Bore Kit for Royal Enfield 650 Twins (includes pistons, rings, pins, & sleeves. Requires machine work.)

920-0145

FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY. NOT LEGAL FOR SALE OR USE NATIONWIDE ON ANY FEDERAL POLLUTION CONTROLLED MOTOR VEHICLE UNDER THE CLEAN AIR ACT.

650 Twin Adjuster Features

Handlebar Adj u sters— • Easy to install • Up to 1" (25 mm ) adjustment forward or backward

• Billet 6061

• Durable black powder coat finish

Adj u sters shown 1" (25mm) forward

Lithi u m-Ion Battery— • Lightweight 210ca/3.6ah lithium motorcycle battery • With the emergency start capability Pulse IPT Battery P.14 Features

Po w er Commander ® V T u ner— • Discover untapped potential and get the most out of your performance combinations with the Dynojet Power Commander V for Royal Enfield 650 twin models. Dynojet ® Power Commander® V Features

Part # Description 570-0003

Handlebar Adjuster Kit for Royal Enfield® INT 650 Twins

IPT3.14 27-003 *

Pulse IPT Battery P.14 for Royal Enfield INT 650 Twins

Dynojet® Power Commander® V for Royal Enfield 650 Twins

* FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY. NOT LEGAL FOR SALE OR USE NATIONWIDE ON ANY FEDERAL POLLUTION CONTROLLED MOTOR VEHICLE UNDER THE CLEAN AIR ACT.

Forged Connecting Rod Set

Forged billet 4340 steel and an "H-Beam" design, gives these rods superior strength over stock rods; includes durable ARP 2000 fasteners and a longer life thanks to the shot-peened finish. They also feature premium bronze wrist pin bushings and are held to very tight tolerances with bores finished to ± .0001" and weight to ± 1 gram per end. These are stock-length rods with a floating style wrist pin.

Part # Description 340-0219

Forged Connecting Rod Set for Royal Enfield® 650 Twins

Connecting Rod Weight with Bolts

Big End

383g

Small End

94g

E very brand has a thing, a focus, a legitimate have lived up to that promise every day and in every single thing we build. The latest from the S&S house of horsepower includes big bore kits, performance exhaust, high flow intake and just about everything required to transform the venerable RE 650 Twin into the powerhouse it was meant to be! If you’re a fan of the 650 (and we are!), we think you’ll be pleased! For the most up to date info on the complete line of S&S parts, check us out on Facebook, Instagram, and YouTube as well as on our site: sscycle.com/royal-enfield-650 S&S Cycle promise to its fans and customers. Ours is proven performance and for the last six plus decades we

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12

Made with FlippingBook - Online catalogs