S&S Cycle - S&S Performance Parts 2025 L - Volume 67

XL / RA1250

www.sscycle.com

1 -2017-UP 2- 2007-'17 3 -1999-'06 4 -1984-'99 5 -1936-'84 6 -XL-RA1250 7 -BELTS & GASKETS 8 -TOOLS 9 -WARRANTY 10 -APPENDIX

Fitment • 1986–’06 Harley-Davidson® Sportster® models

Features And Benefits • Four fuel delivery ports — Better throttle response • O-ring sealed idle mixture screw • Increased air flow for more power • Adjustable accelerator pump for quick throttle response and easy starting • Utilization of the factory dual cable system ensures safe operation • Direct replacement and high quality fit and finish

11-0409

As the throttle plate opens, it exposes more of these holes to engine vacuum and delivers more fuel as rpm increases. When you run out of holes in the intermediate system, the main jet comes in and handles fuel delivery for the higher rpm.

— less down time and better performance • Variable position enrichment starting system

Kit Contents 1. FULL KIT (For engines with stock length cylinders) • Super E carburetor • S&S intake manifold (stock length)

2. PARTIAL KIT • Super E carburetor • Classic Teardrop air cleaner • Mounting hardware • Gaskets • Instructions

• Classic Teardrop air cleaner kit • Mounting hardware and gaskets • Instructions

Super E Complete Carburetor Kits for 1986-'06 Sportster Super E Models Part # 2004–'06 Sportster® models 11-0470 1991–'03 Sportster models 11-0409 1986–90 Sportster models 11-0408

Super E Partial Kit (no manifold) for 1986-'03 Sportster Models Part # 1991–'03 Sportster® models 11-0443 1986–'90 Sportster models 11-0440

For Ironhead XL Models, see page 5-12

Super E & G Carburetor Only For Sportster Fitment

Super E 11-0420

Super G

All Years & Models 11-0421 NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. NOT LEGAL FOR SALE OR USE NATIONWIDE ON ANY FEDERAL POLLUTION CONTROLLED MOTOR VEHICLE UNDER THE CLEAN AIR ACT

Due to inadequate frame clearance, the taller throttle bracket cannot be used on 1986–’03 Harley-Davidson® Sportster® chassis. Therefore, these Sportster models require the installation of earlier butterfly style throttle cables. Kits for 2004–’06 Sportster models are compatible with stock throttle cables. S&S® does not recommend polishing or chrome plating Super E & G carburetors. Our repair department has seen many carbs with plugged passages due to polishing compounds, and some carbs have been destroyed because the polishing or chrome plating had altered critical machined surfaces. Recommended for closed circuit use only—S&S Super E & G carburetors shown in this catalog section are not approved for use on motor vehicles operated on California public highways, or in other states where similar pollution laws may apply. The user shall determine the suitability of the product for his or her use and shall assume all risk and liability in connection therewith.

6-16