S&S Cycle - S&S Performance Parts 2025 L - Volume 67

1936-'84

www.sscycle.com

These Quickee pushrods for 1966-'84 HD® big twin engines can be both installed and removed easily The S&S® design permits a simple, trouble free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! OEM pushrods may be cut to permit removal without rocker disassembly The threaded adjuster screws into the pushrod until the threads disengage and the adjuster simply slides into the pushrod, making installation or removal a snap Once the pushrod is installed and adjusted, the locknut prevents the adjuster from moving Works with stock pushrod covers and Adjustable to work with all stock and aftermarket cams Fits 1966-'84 74" and 103" HD® big twin engines with S&S® rocker arms and 1984-'99 107" and 111"engines Will also fit V100 engines if they have cast tappets blocks They will not fit V100 engines with our billet tappet blocks

1 -2017-UP 2- 2007-'17 3 -1999-'06 4 -1984-'99 5 -1936-'84 6 -XL-RA1250 7 -BELTS & GASKETS 8 -TOOLS 9 -WARRANTY 10 -APPENDIX

Features And Benefits • Can be installed or removed from an assembled engine

Quickee Adjustable Pushrods Application 1966–'84 bt*(S&S Rocker Arms) 1966–'84 bt*(Stock Rocker Arms) *S&S tappet guide, S&S 1984-'99 style tappets

Displacement

Part #

74"-103" 74"-103"

93-5123 93-5134

S&S Quickee Adjustable pushrods are designed for use with 1984–up hydraulic tappets They are not compatible with stock or aftermarket hydraulic tappets for shovelhead engines or most solid style tappets

Features and Benefits • 7/16" Chromoly steel tubing for maximum strength • Reduced pushrod flex for precise valve control at high rpm • Solid lifter conversion kits replace troublesome hydraulic tappets 93-5067

If using S&S tappet guides for shovelhead engines, see S&S Quickee Adjustable pushrods

Adjustable pushrod kits for 1966–'84 big twin with Solid Lifter Adapters Includes adapters for converting 1953–'84 style hydraulic lifters to non-adjustable solids. Cylinder Length 5 330" (Stock) 5 405" (+ 1⁄16")

5 530" (+ 3⁄16") 93-5015

5 630" (+ 5⁄16") 93-5016

Part #

93-5067

93-5014

Non-Adjustable pushrod kits for 1966–'84 big twin with Adjustable Lifter Adapters Includes adapters for converting 1953–'84 style hydraulic lifters to adjustable solids. Adjuster screw in the lifter adapters. Cylinder Length 5 330" (Stock) Part # 93-5068

93-5068

• Fits 1966–’84, 74", & 80" Shovelhead Engines • Includes four non-adjustable steel pushrods (Pushrods are identical to those used in kit part #93-5068.) • Recommended for all shovelhead and shovelhead top/panhead bottom engines with 1948–’52 style lifters

Non-Adjustable Pushrod Kits For 1966–'84 Big Twin Pushrods For Use With 1948–'52 Stock Style Solid Adjustable Lifters. Cylinder Length Part # 5 330" (Stock) 93-5069

Service Part Pushrod Kit With Hydraulic Lifters • Fits 1966–’84, 74", & 80" Shovelhead Engines • Includes four adjustable steel pushrods. Stock adjusting screws (not included) must be used in these pushrods. Adjustable Pushrod Kits For 1966–'84 Big Twin For Hydraulic Lifters. Service Parts For 1966–'84. Cylinder Length Part # 5 330" (Stock) 93-5070 (HD-17904-66)

5-30