S&S Cycle - S&S Performance Parts 2025 L - Volume 67

1999-'06

Phone: 608-627-1497

1 -2017-UP 2 -2007-'17 3 -1999-'06 4 -1984-'99 5 -1936-'84 6 -XL-RA1250 7 -BELTS & GASKETS 8 -TOOLS 9 -WARRANTY 10 -APPENDIX

Features And Benefits • Increase performance at an affordable price

Kit Contents • Cams • Installation Kit: gearcover gasket, bearings, retaining ring, o-ring • Instructions

• Quick installation—reuse many stock components • Easy Start Cams allow stock starter to start any engine

Chain Drive Cam Kits For 1999–'06 Models (Except 2006 Dyna®) Cam Standard

Easy Start

OES 509 510 551 570 583 585 625

330-0400 330-0016 33-5182A 330-0002 330-0003 330-0004 330-0005

– – –

106-5293 106-5296 106-5289 106-5299 106-5302 330-0459

-

MR103

330-0456

*2006 Dyna® cams are in Section 2.

If OES, 509 or 510C cams are used with the stock chain drive system in Twin Cam 88® engines, it is recommended to use cylinder heads with stock valve springs or performance valve springs with no more than 160 lb of seat force For more demanding applications, we recommend the S&S gear drive cams When using 1999–'06 chain drive cams for lifts over 510", S&S strongly recommends that the stock chain drive be upgraded to the S&S gear drive This kit updates the problematic spring loaded chain tensioners to reliable hydraulic tensioners and also upgrades the oil pump 551 and 583 cams are not recommended with compression ratio of 10:1 or higher S&S can do a special order cam Contact your S&S Customer Service Representative for more information NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. NOT LEGAL FOR SALE OR USE NATIONWIDE ON ANY FEDERAL POLLUTION CONTROLLED MOTOR VEHICLE UNDER THE CLEAN AIR ACT

Cam Chain Tensioner Fitment

Drive

Part #

2006 HD® Dyna® 330-0343 NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. NOT LEGAL FOR SALE OR USE NATIONWIDE ON ANY FEDERAL POLLUTION CONTROLLED MOTOR VEHICLE UNDER THE CLEAN AIR ACT Chain

3-47