S&S Cycle - S&S Performance Parts 2025 L - Volume 67

1999-'06

Phone: 608-627-1497

1 -2017-UP 2 -2007-'17 3 -1999-'06 4 -1984-'99 5 -1936-'84 6 -XL-RA1250 7 -BELTS & GASKETS 8 -TOOLS 9 -WARRANTY 10 -APPENDIX

Fitment • 1999–'06 big twins

Features And Benefits • 045" MLS head gaskets • Up to a 40 HP increase • True bolt on kit, no machining required • Maintains stock engine height • Kits include S&S 585 gear drive cams • S&S pushrods are made of high strength chrome-moly tubing • Valve pocket recesses in S&S pistons are enlarged for oversize valves and high lift cams

95" Hot Set Up Kit® Specifications

Compression Ratio 79cc S&S Heads

Displacement

Stock Stroke

Bore

Cylinder Length

Forged Piston Type

95"

4"

37/8"

4 937"

5 3cc pop-up dome

10 4:1

Cylinder w/piston kits include fitted pistons and cylinders that require no boring or honing.

95" Super Stock® Hot Set Up Kits® For 88" Engines Includes S&S 37/8" Bore Cylinders And Pistons, 585 Gear Drive Cams And 79cc Heads Application

Wrinkle Black

1999–’06 (except 2006 Dyna® Models*) 106-0214 NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. NOT LEGAL FOR SALE OR USE NATIONWIDE ON ANY FEDERAL POLLUTION CONTROLLED MOTOR VEHICLE UNDER THE CLEAN AIR ACT

Fuel injected engines will require recalibration of the fuel injection system The S&S VFI modules and closed loop sensor kits are highly recommended Stock cylinders must either be bored to 37/8" or replaced with S&S® 37/8" bore cylinders S&S recommends either CNC porting stock cylinder heads or purchasing Super Stock® heads to maximize the effect of higher lift cams Stock cylinder heads will produce significantly less power S&S can CNC port your heads, for an economical increase in power For 95" kits ordered without cylinders, pistons must be measured and cylinders bored/honed accordingly Recommended piston fitment: Close: 0 0020" – 0 0025" Loose: 0 0032" – 0 0045"

92-1200 series pistons have a 1 270" deck height 030" MLS head gaskets optional: Part #900-0606

S&S Easy Start Cams can save you money—no need to buy compression releases or S&S rocker covers Note when using 1999–'06 chain drive cams: For lifts over 510", S&S strongly recommends that the stock chain drive be upgraded to the S&S gear drive or S&S TC3 oil pump and cam plate This kit updates the problematic spring loaded chain tensioners to more reliable hydraulic tensioners and also upgrades the oil pump

3-33