S&S Cycle - S&S Performance Parts 2025 L - Volume 67

1999-'06

www.sscycle.com

Fitment • 1999–’06 big twins Features And Benefits • Fits stock or S&S heads • Fits stock or engines with taller cylinders

1 -2017-UP 2- 2007-'17 3 -1999-'06 4 -1984-'99 5 -1936-'84 6 -XL-RA1250 7 -GASKETS 8 -TOOLS 9 -WARRANTY 10 -APPENDIX 11 -INDEX

Manifold for S&S carburetors

Manifold for CV carburetor

Manifolds For 1999–2005 Big Twin Engines (Requiring Map Sensor* Machining) Engine Style and Displacement Cylinder Length Manifold Size Super E

Super G

**88", 95" & 106" & S&S T-Series Engines Stock 2006 models

4 937"

410

160-1718

16-2588

4 937" 4 763" 4 888" 5 013"

405 398 408 417

160-1717 160-4487

16-2587 16-2604 16-2603 16-2598

16-0242

**111" & S&S T-Series 111" Engines 117" & S&S117" Hot Set Up Kits **124" & S&S T-Series 124" Engines

– –

*All S&S engines for 1984-'06 and 1999-up big twins equipped with S&S IST ignition system. ** Some S&S heads have additional material on the manifold surface to allow the use of a stock length manifold (410) on a 99-06 111" and 124" engine. If you are not sure which manifold should be ordered, check fitment with the stock manifold first.

16-0241

S&S manifolds require S&S style manifold o-rings S&S style o-rings must be used with these manifolds S&S o-rings are slightly thinner to accommodate the larger S&S port diameter Use of stock o-rings may cause damage

U-Rings for Constant Velocity Carbs For 1999–2005 Big Twin Size Part # 40-42mm 16-0242 USA 27002-89 44-48mm 16-0241

CV Manifolds — 1999–2005 Big Twin Style/Displacement (mm) 88", 95", 106" Twin Cam 88 40-45mm 410

Manifold Size Part #

160-1722 160-0001A

96 stock

48mm 410

Replacement Parts For Manifolds Description

CV Manifolds —1999 & Up Big Twin Style/Displacement (mm)

Part #

Manifold Size

Part #

Manifold Fitting VOES Rubber Cap 3/16" I D x 5/16" O D x 1/2"

50-8372

96 stock 96 stock

40-45mm 405

160-1721 160-0002A

48mm

405

Manifold Vacuum Fitting

16-0136-S

MANIFOLDS FOR SINGLE BORE EFI BIG TWIN ENGINES

Fitment • Stock height or taller than stock 1999–'05 bt • S&S 52mm or 58mm throttle bodies • Stock or S&S heads • S&S T-Series Long Block engines

Manifolds For Single Bore EFI 1999–’05 Big Twins Engine Displacement **88", 95", 103", 106" & S&S T-Series Engines 124" Hot Set Up Kit (w/stock or S&S heads w/stock manifold geometry)

Manifold Size

Cylinder Length

Part #

4 937"

410

16-5141

5 013"

417

16-5139

**S&S T-Series 111" Long Block engines **S&S T-Series 124" Long Block engines

4 763" 5 013"

398 417

16-5136

16-5139 ** Some S&S heads have additional material on the manifold surface to allow the use of a stock length manifold (410) on a '99–'06 111" and 124”engine. If you are not sure which manifold should be ordered, check fitment with the stock manifold first.

S&S style o-rings must be used with these manifolds S&S o-rings are slightly thinner to accommodate the larger S&S port diameter Use of stock o-rings may cause damage

3-20