S&S Cycle - S&S Performance Parts 2025 L - Volume 67
2007-'17
www.sscycle.com
Fitment • 2007-'17 big twin • Sold as stock in 41/8" bore S&S engines
1 -2017-UP 2- 2007-'17 3 -1999-'06 4 -1984-'99 5 -1936-'84 6 -XL-RA1250 7 -BELTS & GASKETS 8 -TOOLS 9 -WARRANTY 10 -APPENDIX 2-54
Features And Benefits • Special rocker arm supports are included • S&S rocker covers are finished with show-quality chrome • Installation on stock and most comparable sized engines can be performed without removing the engine from the frame • Clearanced to permit valve lifts up to 640" using S&S valve spring packages and stock rocker arms or S&S roller rocker arms • S&S rocker covers accept valve springs up to 1 660" O D without modification • Exclusive one way valve built into the rocker cover gasket to control oil carry over
Kit Contents • Front and rear covers • All necessary gaskets and o-rings • Mounting hardware
Die-Cast Rocker Cover Kit Description
Part #
Gloss Black
900-0937 90-4110
Chrome USA 3
If using valve spring packages with taller than stock installed height, some minor clearancing may be required Cylinder heads must be set up correctly for high lift cams, and it remains the builder’s responsibility to confirm all clearances In most instances, only minor clearancing is required to use S&S rocker covers with valve springs larger than 1 660" O D S&S® rocker covers are required if S&S cylinder heads are used with S&S electric compression releases
ANY JOB IS EASY WITH THE RIGHT TOOLS S&S ROCKER COVER WRENCH SET ON PAGE 8-3
Made with FlippingBook Ebook Creator