S&S Cycle - S&S Performance Parts 2025 L - Volume 67

2007-'17

www.sscycle.com

Manifolds for the S&S single bore induction system are specifically designed for EFI applications, and include fuel injector mounting ports and provision for a stock style MAP sensor Manifolds are available in the correct lengths for stock applications as well as S&S Hot Set Up Kits® and engines

1 -2017-UP 2- 2007-'17 3 -1999-'06 4 -1984-'99 5 -1936-'84 6 -XL-RA1250 7 -BELTS & GASKETS 8 -TOOLS 9 -WARRANTY 10 -APPENDIX 2-26

Fitment • Stock height or taller than stock 2008–'17 bt except 2008–2015 touring models • S&S 52mm or 58mm throttle bodies • Stock or S&S heads • S&S T-Series Long Block engines

Kit Contents • Manifold • O-ring intake seals • VOES fitting cap

16-5139

S&S style o-rings must be used with these manifolds S&S o-rings are slightly thinner to accommodate the larger S&S port diameter Use of stock o-rings may cause damage 2006–up models require seperate purchase of HD® intake manifold flanges pn 26993-06 (1 pack).

Manifolds For Single Bore EFI 2008–'15 Big Twin Engines Engine Displacement 96", 103" & 106" (S&S engines with stock bolt pattern) 124" Hot Set Up Kit® (w/stock or standard S&S heads) ** 124" Hot Set Up Kit® (w/S&S + 032" heads only)**

Cylinder Length

Manifold Size

Part #

4 937" 5 004" 5 004" 4 754" 4 878" 5 013"

405 417 405 398 405 417

16-5134 16-5139 16-5134 16-5136 16-5134 16-5139

111" S&S T-Series Long Block Engines

117" Hot Set Up Kit®

124" S&S T-Series Engines, S&S bolt pattern

** Some S&S heads have additional material on the manifold surface to allow the use of a stock length manifold (405) on a 124” engine. If you are not sure which manifold should be ordered, check fitment with the stock manifold first.

Fitment • 2006-'16 HD® Big Twins

106-3957

SINGLE BORE THROTTLE BODIES Description

Part #

Throttle Body, Single Bore, Packaged, 58mm, 2006-up bt

106-3957

Made with FlippingBook Ebook Creator