S&S Cycle

3 PIECE FLYWHEEL ASSEMBLIES FITMENT • 2007–'17 Harley-Davidson® big twins ( except 2017 touring models) —Balanced and unbalanced models • S&S T-Series Engine and Hot Set Up Kit® replacement flywheels FEATURES AND BENEFITS • Heat-treated 4140 material is harder and 114% stronger than stock • New light weight connecting rod forgings • Available with full width wristpin connecting rods • 1.671" diameter crankpin— increased contact area and tighter press fit for a stronger joint. • No welding required! • Integral mainshafts - eliminates two potential points of weakness • Consistent balance and precision machining—Truer flywheels and less vibration • Reduced mainshaft deflection at high rpm— less vibration, reduced piston and rod side thrusting, prevents oil pump damage, fully compatible with gear drive cams • Capable of higher rpm—More available power!

320-0350

How Strong Are Your Flywheels? www.sscycle.com/videos

FLYWHEEL ASSEMBLIES FOR 2007–2017 HARLEY-DAVIDSON® BIG TWIN MODELS (EXCEPT 2017 TOURING MODELS) Engine Displacement Stroke Balanced to Total PistonWeight (gms) RodWP End Style Sprocket Bearing Race Harley-Davidson® Twin Cam 96®/103™

Harley-Davidson® TwinCam96B™/103B™

320-0350 320-0351 320-0352 320-0353 320-0450 320-0407 320-0523 320-0464 320-0545 329-0002

320-0356 320-0357 320-0358 320-0359 320-0544 320-0413 320-0529 320-0471

Yes**

96, 103, 106 big bore, 110, 117 w/S&S Pistons

4 3/8"

1035

Straight

No

Yes**

96, 103, 110 w/Stock Pistons* USA

4 3/8"

1035

Tapered*

No No No No No No

S&S 106 Stroker***

4 1/2" 4 1/8" 4 5/8" 4 5/8" 4 5/8"

1108 1035 1035 1035 1290

Straight Straight Straight Straight Straight

S&S 111

SE 120R (uses 7.575" length rods) †

S&S 124

S&S 143 (uses 7.800" length rods)

329-0002

Special Order

Specify

Specify

Specify

Specify

*Stock pistons in 2007 and later engines require rods with tapered wristpin ends. Note: All S&S Flywheels for 2007 and later engines have 7.659” length connecting rods (except the SE120R & S&S 143, see chart). **Note: Flywheel assemblies supplied with sprocket shaft bearing race installed are compatible with stock roller style sprocket shaft bearings. Assemblies with no race require a Timken® sprocket shaft bearing. ***41/2" stroke flywheels include 7.667" long connecting rods.

† These flywheels are replacement flywheels for the SE 120R. When installing these flywheels in a Harley-Davidson® case, they need to run the HD piston oiling jets— not the S&S® piston oiling jets. Strokes longer than stock will require S&S Piston Oiler Set, part #31-2026. 2007–up stock rod length is 7.659". Main Bearing Note: Most S&S flywheel assemblies for 1999–'17 big twin engines are designed for use with Timken® sprocket shaft bearings. They will fit directly in stock 1999–’02 Harley-Davidson® crankcases and in all S&S crankcases for 1999-'17 big twin engines, with no modifications. However, stock 2003 and later engines use a roller type bearing for the sprocket shaft. S&S does offer flywheel assemblies that are compatible with late roller style stock sprocket shaft bearings, but they are not recommended for very large, high performance engines. S&S strongly recommends retrofitting 2003–'16 model crankcases to accept a Timken sprocket shaft bearing. A Timken conversion sleeve such as Screamin' Eagle® #34822-08 or Jim's® #956 may be used. A charging system spacer for 1999–'02 model year is also required. If you choose not to convert your crankcases to a Timken sprocket shaft bearing, S&S flywheels may be used in 2003 and later engines by either purchasing the stock compatible flywheels or by installing Harley-Davidson® bearing kit #24004-03B when using S&S flywheels designed for Timken bearings. This bearing kit adapts the S&S sprocket shaft so it is compatible with stock roller type bearings. Verify that the bearing kit contains the 24604-00D or 24607-07 sprocket shaft bearing. Do not use a 24604-00, 24604-00A, 24604-00B or 24604-00C bearing. Please be advised that if this type of bearing is used, sprocket shaft bearing failureWILL NOT be covered under warranty.

NOTES

TRYING TO IDENTIFY AN S&S® FLYWHEEL? SEE FLYWHEEL I.D. CHART: PAGE 342

REPLACEMENT PARTS: PAGE 123

82 Order 608-627-1497 S&S Late Models 1999–up

Made with FlippingBook - Online catalogs