S&S Cycle

MANIFOLDS FOR CARBURETED BIG TWIN ENGINES FITMENT • 1999–’06 big twins FEATURES AND BENEFITS • Fits stock or S&S heads • Fits stock or engines with taller cylinders S&S manifolds require S&S style manifold o-rings. S&S style o-rings must be used with these manifolds. S&S o-rings are slightly thinner to accommodate the larger S&S port diameter. Use of stock o-rings may cause damage. See page 211.

NOTES

MANIFOLDS FOR 1999–2005 BIG TWIN ENGINES (REQUIRING MAP SENSOR* MACHINING) Engine Style and Displacement Cylinder Length Manifold Size Super E Super G **88", 95" & 106" & S&S T-Series Engines 4.937" 410 160-1718 16-2588 Stock 2006 models 4.937" 405 160-1717 16-2587 **111" & S&S T-Series 111" Engines 4.763" 398 160-4487 16-2604 117" & S&S117" Hot Set Up Kits 4.888" 408 – 16-2603 **124" & S&S T-Series 124" Engines 5.013" 417 – 16-2598 *All S&S engines for 1984-'06 and 1999-up big twins equipped with S&S IST ignition system. **Some S&S heads have additional material on the manifold surface to allow the use of a stock length manifold (410) on a 99-06 111" and 124" engine. If you are not sure which manifold should be ordered, check fitment with the stock manifold first.

Manifold for S&S carburetors

Manifold for CV carburetor

CV MANIFOLDS—1999–2005 BIG TWIN Style/Displacement (mm) Manifold Size

16-0241

16-0242

Part #

U-RINGS FOR CONSTANT VELOCITY CARBS Size Part # 40-42mm

88", 95", 106" Twin Cam 88

160-1722

40-45mm 410

16-0242 USA 27002-89

160-0001A 169-1725A*

96 stock

48mm 410

16-0241

44-48mm

Special order

Specify

–

*Special Order: Download the Special Order Form at sscycle.com/soforms

CV MANIFOLDS—2006 & UP BIG TWIN Style/Displacement (mm) Manifold Size

16-0136-S

50-8372

REPLACEMENT PARTS FOR MANIFOLDS Description Part # ManifoldFittingVOESRubberCap3⁄16"I.D.x5⁄16"O.D.x1⁄2" 50-8372 Manifold Vacuum Fitting 16-0136-S

Part #

160-1721

96 stock 96 stock

40-45mm 405 48mm 405

160-0002A

Special order 169-1725A *Special Order: Download the Special Order Form at sscycle.com/soforms Specify –

MANIFOLDS FOR SINGLE BORE EFI BIG TWIN ENGINES FITMENT • Stock height or taller than stock 1999–'05 bt (see page 108 for 2006 models) • S&S 52mm or 58mm throttle bodies • Stock or S&S heads • S&S T-Series Long Block engines MANIFOLDS FOR SINGLE BORE EFI 1999–’05 BIG TWINS Engine Displacement Cylinder Length Manifold Size Part # **88", 95", 103", 106" & S&S T-Series Engines 4.937" 410 16-5141 124" Hot Set Up Kit (w/stock or S&S heads w/stock manifold geometry) 5.013" 417 16-5139 **S&S T-Series 111" Long Block engines 4.763" 398 16-5136 **S&S T-Series 124" Long Block engines 5.013" 417 16-5139 **Some S&S heads have additional material on the manifold surface to allow the use of a stock length manifold (410) on a 99-06 111" and 124” engine. If you are not sure which manifold should be ordered, check fitment with the stock manifold first. S&S style o-rings must be used with these manifolds. S&S o-rings are slightly thinner to accommodate the larger S&S port diameter. Use of stock o-rings may cause damage. NOTE

196 Order 608-627-1497 S&S Late Models 1999–up