S&S Cycle

MANIFOLDS FOR SINGLE BORE EFI BIG TWIN ENGINES FITMENT • Stock height or taller than stock 2006–'15 bt, except 2008–2015 touring models • S&S 52mm or 58mm throttle bodies • Stock or S&S heads • S&S T-Series Long Block engines KIT CONTENTS • Manifold • O-ring intake seals • VOES fitting cap

MANIFOLDS FOR SINGLE BORE EFI 2007–'15 BIG TWIN ENGINES Engine Displacement

Cylinder Length Manifold Size Part #

16-5134

96", 103" & 106" (S&S engines with stock bolt pattern)

4.937"

405

16-5139

124" Hot Set Up Kit® (w/stock or standard S&S heads) **

16-5139

5.004"

417

16-5134 16-5136 16-5134

124" Hot Set Up Kit® (w/S&S +.032" heads only)**

5.004"

405

4.754"

398

111" S&S T-Series Long Block Engines

117" Hot Set Up Kit®

4.878"

405

124" S&S T-Series Engines, S&S bolt pattern 16-5139 **Some S&S heads have additional material on the manifold surface to allow the use of a stock length manifold (405) on a 124” engine. If you are not sure which manifold should be ordered, check fitment with the stock manifold first. 5.013" 417

S&S style o-rings must be used with these manifolds. S&S o-rings are slightly thinner to accommodate the larger S&S port diameter. Use of stock o-rings may cause damage. 2006–up models require seperate purchase of HD® intake manifold flanges pn 26993-06 (1 pack). NOTES

108 Order 608-627-1497 S&S Late Models 1999–up

Made with FlippingBook - Online catalogs