Roland Sands Design Catalogue

CAFE

NOSTALGIA

Get your bars up where you can use them with the RSD Mega Riser. We’ve taken design flavor from BMX and Mountain biking, blended it with a little Motocross, sprinkled in classic RSD styling and created the ultimate narrow high riser for your V-twin. Now you can run an extremely narrow handlebar with a narrow grip to grip width keeping your hands inboard of mirrors and car doors. Pair Mega Riser with the new RSD narrow bars and you have the ultimate highbar set up that looks at home on a club bike, ultra narrow glide chopper or aggressive scrambler. Mega Risers

One piece riser

for 1” Bar

• Replaces conventional risers to allow for use of narrow handlebars • Overall handlebar clamping width 2.5” • Designed specifically for RSD Narrow handlebar line but, also fits standard handlebars (knurling may be exposed) • Available in Contrast Cut, Black Ops and Chrome FINISH PART # chrome 0208-2103-ch Contrast cut 0208-2103-BM

• Bolt-on to most models with removable risers & 3-1/2” on-center pattern • Available for 1” and 1-1/4” handlebars • Drilled and tapped for ½” -13 mounting bolts • Pinch bolts included • 3-1/2” on-center mounting bolt spacing

BLACK OPS

0208-2103-SMB

Cafe mega riser

Nostalgia Mega riser

for 1” Bar

for 1” Bar

FINISH

PART #

FINISH

PART #

chrome

0208-2111-CH 0208-2111-BM 0208-2111-SMB

chrome

0208-2113-CH 0208-2113-BM 0208-2113-SMB

CONTRAST CUT

CONTRAST CUT

BLACK OPS

BLACK OPS

Cafe Mega riser

Nostalgia mega riser

for 1-1/4” Bar

for 1-1/4” Bar

FINISH

PART # 0208-2110-CH 0208-2110-SMB 0208-2110-BM

FINISH

PART # 0208-2112-CH 0208-2112-SMB 0208-2112-BM

chrome

chrome

BLACK OPS CONTRAST CUT

BLACK OPS CONTRAST CUT

One Piece Risers

The leverage produced when running tall ape hangers causes extra stress to the bars and risers. We developed our one piece top riser for that extra bit of rigidity needed with high apes. We’ve added strength where needed and connected the top clamps to unify the structure, meaning less flex and more clamping force.

One piece riser

• Accepts stock or aftermarket 1” diameter bars • 1 ½” tall • Pinch bolt is included • Drilled and tapped for ½” -13 mounting bolts • Available in Contrast Cut, Black Ops and Chrome • 3-1/2” on-center mounting bolt spacing

for 1” Bar

FINISH

PART #

chrome

0208-2103-ch 0208-2103-BM 0208-2103-SMB

Contrast cut

BLACK OPS

Cafe mega riser

for 1” Bar Nostalgia M

52 | ROLAND SANDS DESIGN

for 1” Bar

FINISH

PART #

FINISH