Roland Sands Design Catalogue

Clip - On Handlebars

The RSD 1” Clip-Ons mount to 39mm, 41mm or 49mm front forks, below the top triple clamp, for a low handlebar position. The aluminum bars are dimple milled to allow for stock wiring to cleanly exit your stock switch housings.

• Adjustable to any pullback and any height between top and bottom triple clamps • Fixed 5 degree down angle • Replaces top mounted handlebars and risers • Bar is 1” diameter to accept stock or aftermarket hand controls • Bars slotted for external wiring and black anodized • Black Ops has a gloss black bar w/ a contrasting textured black and gloss black clip on

• 39mm Clip-Ons utilize all stock wiring, so there is no cutting or soldering. • 41mm and 49mm Clip-Ons may need to shorten, cut and/or solder wiring, depending on current bar height * 41mm and 49mm are not recommended for use with stock hand controls, due to clearance issues. A modified gas tank is recommended.

41MM - SOFTAIL

49MM - DYNA & 2016 SPORTSTER 48

39MM-SPORTSTER(EXCEPT2016SPORTSTER48)

FINISH

PART #

FINISH

PART #

FINISH

PART #

0208-2041-b 0208-2041-smb 0208-2041-ch

0208-2039-ch 0208-2039-smb

CHROME BLACK OPS

CHROME BLACK OPS

CHROME BLACK OPS

0208-2042-b 0208-2042-smb 0208-2042-ch

0208-2039-b

GLOSS BLACK

GLOSS BLACK

GLOSS BLACK

When installing Clip Ons we use these Misano race styled Riser Hole Plugs to clean up the holes in the top of your stock triple clamp. Misano Riser Plug - Set

• Easy bolt-on installation • CNC machined from billet aluminum • Hides unsightly riser mounting holes in top triple tree * For 1/2” through hole

UNIVERSAL

FINISH

PART #

0208-2060-bm 0208-2060-ch 0208-2060-smb

CHROME

contrast cut

ROLAND SANDS DESIGN | 51

BLACK OPS