Jims Catalogue

JIMS ® NEW PRODUCTS JIMS ® NEW PRODUCTS TRANSMISSION

5 AND 6-SPEED COUNTERSHAFT BEARING REMOVER & INSTALLER TOOL

This new JIMS exclusive tool will install or remove the closed end countershaft bearing on all 5-Speed or 6-Speed Cruise Drive transmis- sions without using a press or tapping it in with a transmission shaft. This is a precision hand tool designed to install the bearing square and to the proper depth, the JIMS way. For more details see No. 739-IS instructions.

2

3

7

PARTS AVAILABLE SEPARATELY NO. QTY. DESCRIPTION PART NO. 1 1 PULLER BAR 739-1 2 1 DRIVER, CRUISE DRIVE 739-2 3 1 DRIVER, 5 SPEED 739-3 4 1 STOP COLLAR 739-4 5 1 TOOL, SCREW 1024 6 1 SPUD 2190 7 1 BEARING 2010 1 O-RING 2310 1 INSTRUCTION SHEET 739-IS

No. 739 - Use on all H-D ® Cruise Drive 6-Speeds and 1980-2006 5-Speeds - including aftermarket6-speeds.

6

1

4

5

JIMS CRUISE DRIVE WIDE BEARING TRAP DOOR AND SHIFT FORK SHAFTS UPGRADE KIT

This new JIMS Cruise Drive upgrade kit was designed to give your transmission positive shifting and shaft centerline integri- ty to handle today’s performance powertrains. The upgraded 6061 precision-machined aluminum trap door holds trans- mission shaft centerlines to within .0005” and incorpo- rates wider, heavy duty bearings. These bearings

are retained with beveled retaining rings to mini- mize bearing end play. Included with the kit are two solid, true centerline, rigid, high strength shift fork shafts that replace the OEM hollow shafts. For more details see No. 2336-IS instructions. No. 2336 - Black, Use on all H-D Cruise Drive trans- missions to present. No. 2340 - Silver, Use on all H-D Cruise Drive trans- missions to present.

1

PARTS AVAILABLE SEPARATELY

NO.

QTY DESCRIPTION

PART NO.

1 1 2 3

1 1

TRAP DOOR, BLACK TRAP DOOR, SILVER

2336-1 2336-2

1 SHIFT SHAFT, LONG, CRUISE DRIVE 2336-3 SHIFT SHAFT, SHORT, CRUISE DRIVE 2336-4

2

1 2 2 2

3

BEARING, TRAP DOOR

8992

RETAINING RING, TRAP DOOR

35087-99

DOWEL PIN

221

2 DOWEL BUSHING

1486-1828

1

INSTRUCTION SHEET

2336-IS

XI