Jims Catalogue

RIGHT SIDE DRIVE TRANSMISSION RIGHT SIDE DRIVE, 6-SPEED OVERDRIVE, SUPERKITS TWIN CAM ® & EVO SOFTAILS

Built with large powerful engines in mind, JIMS ® Right Side Drive transmission has unique features that are important to its strength and durability. It has an outboard support bearing for the output mainshaft. This bearing minimizes flexing of the mainshaft and enhances reliability with engines like the JIMS ® 120”, 131” & 135”. The bearing, including the outboard sup- port bearing, are pressure fed by a built-in oil pump. There is no stronger RSD transmission available. JIMS ® RSD 6 Speed Super kits are designed to install in any H-D ® Softail ® transmission case or aftermarket Softail ® cases. Some minor modifications may be required to trans case depending on the manufacturer. Complete instructions for installation are provided with each kit. RSD super kits are supplied with a chrome aluminum trap door. You’ll have a choice of a hydraulic actuated clutch pushrod system or a mechanical actuated pushrod. It is best if these assembled RSD transmissions are installed in a RSD style frame offered by most frame manufacturers for ease of installation and fitment. For more details see No. 8236-IS instructions. RSD transmissions will not bolt into a stock style frame without extensive modification to the frame. NOTE: Different parts options are listed below, depending on the year and type of trans case being used, either an EVO or Twin Cam ® . RSD SUPER KIT FITS: • No. 8235 - 1990 - 2006 Softail ® transmission cases, supplied with hydraulic actuated clutch pushrod system. This hydraulic system will require a master OPTIONAL PRODUCT FOR INSTALLING A RSD IN A 1990-1999 EVO TRANSMISSION CASE: The following list of product will be required for installation, if not previously obtained or on the transmission case. • No. 7514 - Trans-case shifter shaft sleeve (replace existing sleeve or modify the longer early existing sleeve). • No. 1664 - Trans-case shifter shaft sleeve remover / installer tool, use to install JIMS ® No.7514 shifter shaft sleeve. • No. 33904-00 - Neutral switch with o-ring (this late switch must be installed when using a neutral light). • No. 8135 - Neutral switch wiring kit: (use on 1990-1997) use of this wiring kit will convert a single pole wiring harness into a two pole wiring harness, instructions included. • No. 8136 - Neutral switch spacer kit: Required when using a OEM top cover (lid) from 1990 to1997 and switch No.33904-00. OPTIONAL PRODUCTS FOR INSTALLING A RSD IN A 2000-2006 TWIN CAM ® TRANSMISSION CASE: The following list of product will be required for installation, if not previously obtained or on the transmission case. • No. 33904-00 - Neutral switch with o-ring (this late switch must be installed when using a neutral light). • No. 8135 - Neutral switch wiring kit: use of this wiring kit will convert a single pole wiring harness into a two pole wiring harness or for custom wiring application, instruc- tions included. No.8246 HYDRAULIC VERSION No.8247 MECHANICAL VERSION cylinder, hydraulic line and Dot 5 or equivalent (example of master cylinder kit H-D ® No.45232- 03A.) • No. 8236 - 1990 - 2006 Softail ® transmission cases, supplied with mechanical actuated clutch pushrod system has a ball and ramp system that works with common O.E.M. type clutch cables.

18

99