Jims Catalogue

SHOVEL TAPPET BLOCKS

NOTE: THESE PUSHRODS HAVE NO OILING HOLE.

SUPER “POWERGLIDE ™ ” TAPPET BLOCK KIT JIMS ® has designed and engineered a complete block kit for shovel motors, whether stock or perform- ance application. This kit has an upgraded pushrod seat at a 3/8” diameter and a 5/8” lower seat. Lowering the pushrod seat will help reduce the severe tappet pushrod angle, making JIMS ® kit as close to an EVO tappet as possible. Kit comes with four Tappets with new pushrod seats, 7075-T651 tappet blocks polished, four Pro-Lite Worksavers ® Shovel (No hole) pushrods, and two tappet block gaskets These have a .761” diameter tappet with a total Hydraulic Lift of 0.100”. For more details see No.2411- IS instructions. No. 2411 - Polished, use on all Big Twins 1966-1984 (all Shovelheads). No. 2411C - Chromed, use on all Big Twins 1966-1984 (all Shovelheads). Replacement tappets for above kits; No.2411 and No.2411C, sold each: No. 1029AP - Standard

9

No. 1029AP2 - +.002 Oversized. No. 1029AP5 - +.005 Oversized.

NOTE: THESE PUSHRODS HAVE NO OILING HOLE.

PERFORMANCE “POWERGLIDE ™ ” KIT (SHOVELHEAD) JIMS ® lowered the rod seat and increased the pushrod seat diameter to 3/8” making this tappet as close to an Evo as possible. Kit comes with 4 JIMS ® Powerglide ™ Tappets, standard O.D. of .731, and a set of Pro-Lite Worksavers ® Shovel (No hole) Pushrods. These tappets will fit in JIMS ® Shovelhead Tappet Blocks, No. 1095, or stock tappet blocks. See No.2428-IS instruction sheet. Total Hydraulic Lift: 0.100”. For more details see No.2428-IS instructions. No. 2428 - Use on Big Twin Shovelhead 1966-1984. No. 2428-5 - Use on .005 oversize on Big Twin Shovelhead 1966-1984.

65