Jims Catalogue

SPORTSTER ® &BUELL ® TAPPETS

Oil Fed Axle

SOLID ADJUSTABLE TAPPETS FOR SPORTSTER ® AND BUELL ® 4340 CHROMOLY STEEL SCREW, WITH OIL HOLE, TO FEED TOP END. 4340 Chromoly Steel

SPORTSTER ® HYDROSOLID ™ II TAPPETS This tappet replaces and surpasses H-D ® No.18538-99. Use with JIMS ® No.1043 billet lifter covers. For more details see No.1820-IS instructions. Standard O.D. is .8420”. Total Hydraulic Movement: 0.050” No. 1820 - Use on Sportster ® 2000 to present. Use on Buell ® 2000-2009, except 1125R.

Solid adjustable. Standard O.D. is .9035”. Use non adjustable pushrods. (Clearanced for about .700” lift cams, however, you must still check lifter travel for performance cams.) Individual tappet weighs 146 grams. No. 18526-89SA - Use on Sportster ® & Buell ® 1991-99.

No. 1821 - Oversize +.001”. No. 1822 - Oversize +.0015”.

No. 18526-89SA1 - Oversize +.001” No. 18526-89SA5 - Oversize +.005”

9

4340 CHROMOLY STEEL SCREW, WITH OIL HOLE, TO FEED TOP END

HYDROSOLID TAPPETS FOR SPORTSTER ® AND BUELL ® Standard O.D. is .9035”. This tappet replaces and surpasses H-D ® No.18529-89. For more details see No.1803-IS instructions. No. 1803 - Use on Sportster ® & Buell ® 1991-99.

SOLID TAPPETS FOR SPORTSTER ® AND BUELL ®

Solid. Standard O.D. is .9035”. Use adjustable pushrods (Clearanced for about .700” lift cams, how- ever, you still must check lifter travel for performance cams). Individual tappet weighs 123 grams. No. 18526-89S - Use on Sportster ® & Buell ® 1991-99.

SOLID ADJUSTABLE TAPPET Standard Solid Tappet. Standard O.D. is .731” 9/32”- 32 thread. The 9/32”-32 thread adjuster screws

SOLID TAPPET Must use adjustable pushrod. Standard O.D. is .8425”. Individual tappet weighs 109 grams. NOTE: Fits aftermarket motors. No. 2465-1 - Use on Sportster ® 1986-90, Buell ® 87-90.

and nuts must be purchase separately. No. 2471-1 - Use on Sportster ® 1957-85.

No. 2472-1 - Oversize +.002”. No. 2473-1 - Oversize +.005”.

No. 2466-1 - Oversize +.002”. No. 2467-1 - Oversize +.005”.

58