Jims Catalogue

PAN & SHOVEL TAPPETS

Now you can have the same hydraulic function as EVO’s. Are stock hydraulic units wearing you down? Are you installing solid tap- pets just so you will know what adjustment your tappets are set at? STOP! You need the "Powerglide TM " solution. At about 30% cost savings and about 85% more stability, these tappets are perfect in Panhead and Shovelhead tappet blocks use with H-D ® Part No.18600-53 (front) and No.18610-53 (rear). Will also work in any tappet block and case having oil passages to tappet blocks pre EVO. These tappets will accommodate a .550” lift or more without modification depending on the cam base circle size when using JIMS ® tappet blocks No.1095. If using stock H-D ® tappet blocks, check for roller to block clearances. Use with H-D ® No.17904-66 or JIMS ® No.2369 Pushrods for Shovelhead. For Panhead, use H-D ® No.17905-53B or JIMS ® No.2404 pushrods. STOP TAPPET NOISE FOREVER WITH “POWERGLIDE ™ ” HYDRAULIC TAPPETS FOR PAN AND SHOVEL PERFORMANCE CAMS ( WILL ALSO WORK WITH SOLID STYLE CAMS )

BILLET STEEL PERFORMANCE POWERGLIDE ™ HYDRAULIC TAPPET FOR PANS AND SHOVELS

POWERGLIDE

9

NOTE: These pushrods have no oiling hole.

➦

“POWERGLIDE ™ ” UPGRADE KIT Now all of you Shovel motor riders, using JIMS ® “Powerglide ™ ” Tappets No.2459-1, can upgrade to the lat- est design improvements. Use on stock or performance applications. Kit comes with four new 3/8” diameter pushrod seats to make the Powerglide ™ 5/8” shorter, and four new Pro-Lite Worksavers ® Shovel Pushrods (no hole) with complete instruction sheet. For use with above tappets 2459-1 when used with pushrod seats. For more details see No.2400-IS instructions. No. 2400 - Use on all Shovel Big Twins using JIMS ®

POWERGLIDE ™ PAN AND SHOVEL HYDRAULIC TAPPET For more details see No.1800-IS instructions. Std. O.D. is .731”. No . 2459-1 - Use on Big Twin 1953-84, aftermarket engines. See Instructions No.2275-IS.

No. 2460-1 - Oversize +.002”. No. 2461-1 - Oversize +.005”.

“Powerglide ™ ” 2459-1, 2460-1, 2461-1. Shovelhead Tappets with shovel top ends. 24 threads per inch.

NOTE: Surpasses and replaces H-D ® No.18522-53 tappet and H-D ® No.17920-53A hydraulic unit. We recommend using with JIMS ® tap- pet blocks No.1095. Standard outer diame- ter is .731” (Caution: some H-D ® blocks 1978-84 have oil drain hole location prob- lems with some high lift cams).

55

SEE JIMSUSA.COM FOR DETAILED INSTRUCTIONS