Jims Catalogue

STROKER ACCESSORIES

REQUIRED COMPONENTS FOR “ALPHA” & “BETA” STROKER KITS

ELECTRONIC FUEL INJECTED MANIFOLD SPACER KITS

3

Stroker Kits DO NOT include gaskets. Please refer to recommended Part No. when ordering your new JIMS ® gasket kit. GASKET KITS FOR JIMS ® TWIN CAM ® STROKER KITS Complete engine and primary gasket kits for JIMS ® 4” bore 113” & 116” Stroker Kits, & 100” Big Bore Kits. Includes .040” Head Gasket, .020” Base Gasket. No. 871 - 2007-present FL’S. (4” Bore) No. 872 - 2007-present FXST. (4” Bore) No. 870 - 2006-present Dyna. (4” Bore) No. 858 - 2000-06 Softail & 1999-05 Dyna. (4” Bore) No. 859 - 1999-06 FL Models. (4” Bore) No. 857 - 4” Head & Base gasket kit only. No. 873 - 4.125” Head & Base gasket kit only. Note: Base gasket is not an o-ring style gasket.

(Head to Manifold Spacer) Use with Stroker Kits when fitting standard width manifolds and using taller cylin- ders. Also use with JIMS ® 113” or 116” Stroker’s using +0.100” taller cylinders. Spacers kits will increase the distance (wider) between the heads by 0.080”, allows the use of standard width manifolds such as the stan- dard Harley ® EFI, Screamin’ Eagle ® , S&S ® or other stock width manifolds having standard size intake ports. For more details see No.721-IS instructions. No. 720 - Use on all 2006-pres. Twin Cam ® models, having a intake port size of 1.80”. No. 725 - Use on all stock Big Twins manifolds, 1990-Pres. (NON-CVO’s) having a intake port size of 1.640”. No. 721 - Use on all 2006-pres. Twin Cam ® models, hav- ing a intake port size of 1.640” to 1.740”. NOTE: These manifolds are designed to fit on heads with a 1.640” intake port size only. 113” or 116” stroker kits require a special extendedmanifold. JIMS ® recommends using aMikuni ® carburetor. However, you can use a stock CV, Screamin’ Eagle ® CV, or an S&S ® “G”car- buretor. CARBURETED No. 700 - (Manifold) Use with Mikuni ® Carburetor, Stock CV Carburetor, or Screamin’ Eagle CV Carburetor. (Use with No.703 or No.701) No. 702 - (Manifold) Use with S&S Super “G” Carburetor. Includes aluminum spacer. Customer must use his bakelite spacer No. 703 - ( Flange) for use with Part No.700 40mm CV, or a 42mm Mikuni. No. 701 - ( Flange) for use with Part No.700 44mm CV, or a 45mm Mikuni. NEW

EXTENDED MANIFOLD & FLANGES ACCESSORIES

26