Jims Catalogue

BRAKE & WHEEL TOOLS

WHEEL BEARING LOCKNUT SOCKET

TIRE AIR PRESSURE GAUGE

NEW

The only thing between you and the road is your tires. The JIMS new rubber coated gauge, will give you accurate air pressure for any standard tire. Records pressure until release button is engaged. No. 781 - Tire air pressure gauge.

Use to remove and install the slotted locknut to the correct torque on spoke wheels. For more details see No.94630- IS instructions. No. 94630-67 - Use on all Big Twin & Sportster ® 1967-72. PARTS AVAILABLE SEPARATELY NO. QTY. DESCRIPTION PART NO. 1 1 CENTERING PIN 2202 2 1 INSTRUCTION SHEET 94630-IS 1

BRAKE BLEEDER KIT Use this tool to catch brake

HANDY PACKER ™ BEARING PACKER This tool is a quick and easy way to replace bearing grease in exposed ball or roller bearing bearings. Simply inject fresh grease through the grease fitting, set the bearing on the piston, and push down on the piston plunger. Includes easy-to-grip dust cover to keep stored grease like new. Works with bearings up to 3.5” O.D. No. 1766 - Use on all H-D ® exposed ball or roller bear- ing bearings up to 3.5” O.D.

fluid while bleeding the brake lines. The clear vinyl hose, and semi-transparent catch-can allows you to see when air is out of the line, and when the contain- er is nearing full. Includes three bleeder fitting adapters. No. 1768 - Use on all hydraulic brakes.

22

BRAKE CALIPER PISTON REMOVER This tool will support the brake caliper pistons for removal by holding the pistons square to their bores. This prevents any damage to the pistons and the piston bores so seals & wipers can be replaced. No. 1162 - Use on all Big Twin, 4 piston brake calipers 2000-2007. Use on 2000 - 2003 XL. No. 945 - Use on all new Hayes front brake calipers FXST and FXD 2008-present. No. 946 - Use on all new Hayes rear brake calipers FXST and FXD 2008-present.

UNIVERSAL BEARING PACKER Simply place the bearing

between the plastic cones, tighten, and apply grease through the fitting on the end of the threaded shaft. This tool forces out old grease and evenly injects fresh grease. No. 1767 - Use on all H-D ® exposed ball or roller bear- ing bearings up to 4.125” O.D.

216