Jims Catalogue

TRANSMISSION SEAL & RACE TOOLS

SEAL DRIVER EARLY & LATE 5-SPEEDS Use to install the main seal in transmission. This tool will press in the seal as flat and straight as pos- sible to .050” below hous- ing for a no leak fit. Use with JIMS ® tool No.95660- 42. For more details see No.95660-IS instructions.

4

7

2

5

Endorsed By

NEW

10

1

No. 95660-85 - Use on all 5-speed Big Twins and after- market 6-speed 1980-2006 except 2006 Dyna. No. 2346 - Use on all Big Twin 1980-84 5-Speeds.

If applying heat use No. 899 heat stick- ers See Page 212.

9

8

3

6

MAINSHAFT BEARING RACE TOOL Use to remove and install the bearing inner race on the transmission mainshaft. No. 34902-84 - Use on all Big Twin Late 1984-present. Use on all Twin Cam ® ‘A’ and ‘B’.

4

3

PARTS AVAILABLE SEPARATELY

NO.

QTY.

DESCRIPTION

PART NO.

2

1 2 3 4 5 6 7 8 9

1 1 1 1 1 1 2 2 2 1 1

LEFT HAND THREADED EXTENSION

2139 2140

PUSHER TUBE PULLER PLATE

34902-84-3

SCREW

1024 2013 1025 2030 2212 2020 2032

1

PULLER BAR HARDEN TIP

Endorsed By

BOLT

5

7

6

FLAT WASHER FLAT WASHER

10 11

NUT

4-SPEED TRANSMISSION MAIN SEAL TOOL Use to install and remove main seal in all 1936-76 4-Speed transmissions, as well as installing all other Big Twin main seals. This tool will push the seal in as flat and straight as possible to .050” below housing for a no leak fit. To order other drivers for later 4-Speeds and 5-Speeds - see this page. For more details see No.95660-IS instructions. No. 95660-42 - Use on all Big Twin 1941-79.

INSTRUCTION SHEET

34902-IS

20

Endorsed By

PARTS AVAILABLE SEPARATELY

SEAL DRIVER LATE 4-SPEEDS

NO.

QTY.

DESCRIPTION

PART NO.

1 2 3 4 5 6 7 8

1 HANDLE

95660-42-1 95660-42-2

Use to install the main seal in transmission. This tool will press in the seal as flat and straight as possible to .050” below housing for a no leak fit. Use with JIMS ® Tool No.95660-42. For more details see No.95660-IS instructions. No. 95660-77 - Use on all Big Twin 1982-86 4-Speeds.

1 REMOVER INSERT

1 INSTALLER

2139 1024 2032 2020

1 REMOVER SCREW

1 NUT

2 SAE WASHER 5/8” 4 #8 SELF TAP SCREW 1 INSTRUCTION SHEET

95660-42-7

95660-IS

196