Jims Catalogue

OIL FILTER TOOLS

NEW

76mm OIL FILTER CAP WRENCH

A perfect fit for all 76mm oil filters with 14 flute ends.

SLIM JIM OIL FILTER WRENCH This is the industries slimmest filter wrench allowing more clearance to remove the oil filter, especially around oil coolers and crank position sensors. The tool has a 3/8” drive receiver for an extension tool. No. 941 – Use on all 14 flute oil filters for H-D’s.

The cup design allows easy filter removal or installa- tion, even in tight locations. Use with 3/8” square drive. Will not work on Twin Cam ® Alpha engines. No. 1769 - Use on all Big Twins, XL’s & all Buells ® , and all oil filters requiring a 76mm, four- teen flute wrench.

18

OIL FILTER CUTTING STAND This stand makes the task of cutting open your oil filter easy.

OIL FILTER CUTTER Troubleshooting your oil management system requires looking at the oil fil- ter. Use this tool to inspect for

No longer will that slippery filter drop while try- ing to cut it open. This stand can be mounted to a bench or used in a vice. The u-bolt quickly tightens the filter in place with the wing nuts provided. Use JIMS ® No. 935 oil filter cutter shown on right when using this tool. For more details see No.934-IS instructions. No. 934 - Fits all common O.E.M. H-D ® spin-on oil filters.

any damaging particles that may be trapped in the filter. This tool locks down the filter for a clean cut around the filter base by rotating the filter. Use this tool with JIMS ® No. 934 oil filter cutting stand along with a common vise. See left side. Will fit filters up to 5-1/2" diameter. No. 935 - Fits spin on style oil filters to 5-1/2" diameter.

188