Jims Catalogue
FLYWHEEL TOOLS
FLYWHEEL RUNOUT (TRUENESS) INSPECTION GAUGE Check flywheel runout of the pin-
1
NEW
ion shaft while assembled in engine case. Also checks the amount of gear lash on gear driven cams used in some twin cam engines. By using a JIMS tire rotator No. 936 you can remove most all of the stress being applied to the fly- wheel by not rotating the engine with the electric starter motor. For more details see No.785-IS instructions. No. 785 - Use on 1970 to pres- ent Big Twin, Shovels, EVO and Twin
3
6
3
4
TESTING RUNOUT
5
2
PARTS AVAILABLE SEPARATELY
NO. QTY.
DESCRIPTION
PART NO.
1 1 INDICATING PLATE 2 1 1" DIAL INDICATOR 3 1 THUMBSCREW 4 1 THUMBSCREW
785-1 940-4 1391 1392 1085 1122 947-IS
5 1 SPACER 6 1 SCREW
7 1
INSTRUCTION SHEET
TESTING GEAR LASH
15
END PLAY GAUGE INDICATOR TOOL Finally an indicator tool kit designed with the special H-D ® thread pitch for mounting to cases for checking end play on engines or transmis- sions. Threads provid- ed in both are 1/4”- 20 and 5/16”-18 on
4
6
1
7
5
8
2
3
8 10
the mounting rod. One example is shown in photo. Now you have a 360- degree indicator mount that can be used in any position for checking cam end play, rocker end play breather gear end play, flywheel run out, mainshaft, starter gear run out, and also shift drum end play. If mounted with the 5/16”-18 thread-
9
11
ed mount you can mount to the primary side of the engine to check flywheel end play. The use of this tool is only limited to your imagination. For more details see No.940- IS instructions. No. 940 - Use on all H-D ® Big Twins & Sporters ® .
PARTS AVAILABLE SEPARATELY
NO.
QTY DESCRIPTION
PART NO.
1 2 3 4 5 6 7 8 9
1 1 1 1 2 2 1 2 1
I. D. THREADED ROD 1/4-20 THREADED ROD 5/16-18 THREADED ROD
940-1 940-2 940-3 940-4 940-5 940-6 8362 1683 2014 2017 1222 940-IS
INDICATOR GUAGE
SWIVEL CLAMP
ROD, NON - THREADED SCREW,1/4-20X5/8 SHCS
WASHER, 1/4 WASHER, 5/16 NUT 1/4-20 NUT 5/16-18
10 1 11 1 12 1
INSTRUCTION SHEET
175
Made with FlippingBook Online newsletter