Jims Catalogue

PISTON RING TOOLS

PISTON RING EXPANDER TOOL

PISTON RING END GAP TOOL FOR TWIN CAM PISTONS & JIMS ENGINES

NEW

No.3201

No.3200

This is another unique tool by Hiro Koiso. This tool makes measuring ring end gap faster, more accurate and eliminate the guess work. The flanged design allows the piston ring to fit squarely in cylinder bore every time. This is the first tool to desinged to be able to test oil ring gaps by a proprietary cutout feature. Just install any ring, top, 2nd, or oil control rails on the tool. Install tool into a cylinder bore and then view the ring end gap in the “Key Slot”. Use a feeler gauge to get your end gap measurement. Each side of the tool is made for checking a stan- dard size piston rings. For more details see No.3200- IS instructions. No. 3200 – Use on H-D Twin Cam standard size pis- tons for 95" 103" or 110", with 3.875" or 4.000" bore. No. 3201 - Use on JIMS Twin Cam motor standard size pistons for 120", 131", 135”, with 4.125" or 4.310" bore.

11

Use to remove and install piston rings. Reduces the risk of ring breakage. This tool has tappered jaws to hold all normal size rings from 3/64" to 1/4" ( 1.2 - 6.3mm) thickness. No. 1235 - Use on all piston rings.

NEW

ANGLED FEELER GAUGE This new innovative feeler gauge holder elimi- nates the need to use bulky multi feeler gauge tools while performing valve adjustments. This tool is ideal for reaching down into small tight areas and incorporates an angle to help reach around corners, often necessary for adjusting valves. Tool includes two handles with: .002", .003", .004", .005", .006" and .008" inserts and an allen wrench. For more details see No.908-IS instructions. No. 908 - Feeler Gauge Kit

PARTS AVAILABLE SEPARATELY

NO. QTY.

DESCRIPTION

PART NO.

1 2 2 2 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 1

HOLDER, FEELER GAUGE

908-1 1247

6-32 X 3/8 BUTTON HEAD, SOCKET .002”=.05MM, BLADE, FEELER GAUGE .003”=.08MM, BLADE, FEELER GAUGE .004”=.10MM, BLADE, FEELER GAUGE .005”=.13MM, BLADE, FEELER GAUGE .006”=.15MM, BLADE, FEELER GAUGE .008”=.20MM, BLADE, FEELER GAUGE .009”=.229MM, BLADE, FEELER GAUGE .010”=.254MM, BLADE, FEELER GAUGE .011”=.279MM, BLADE, FEELER GAUGE

908-02 908-03 908-04 908-05 908-06 908-08 908-09 908-10 908-11

11

1

12 1

1” KEY RING (NOT SHOWN) 908-IS INSTRUCTION SHEET

2213

13

1

908-IS

164