Jims Catalogue

FUEL INJECTION

PARTS AVAILABLE SEPARATELY

NO. QTY. DESCRIPTION

PART NO. 5225-53 5225-58 5225-62

1 1 53MM MACHINED THROTTLE BODY 2 1 58MM MACHINED THROTTLE BODY 3 1 62MM MACHINED THROTTLE BODY 5 2 SCREW, 8-32 (THROTTLE PLATE) 6 1 53MM THROTTLE PLATE 7 1 58MM THROTTLE PLATE 8 1 62MM THROTTLE PLATE 9 1 53MM THROTTLE SHAFT 10 1 58MM THROTTLE SHAFT 11 1 62MM THROTTLE SHAFT 12 1 RETAINING RING, THROTTLE SHAFT 4 2 BEARING, BALL, SEALED

1

5256 5264

5226-53 5226-58 5226-62 5227-53 5227-58 5227-62

5266 5258 5267 5228 5271 5271 5231 5262 1294 5253 5252 5260 5259 5251 5268 5270 2297

13 1 SPRING, REEL RETURN

14 1 NUT, 5/16-24 15 1 CABLE REEL

16 1 SET, SCREW, 10-32 (CABLE HOLDER/ GUIDE) 17 2 SCREW, 10-32 (CABLE HOLDER/GUIDE)

18 1 CABLE HOLDER, GUIDE

19 2 STUD, 1/4-20

20 2 SCREW, 10-32 (POSITION SENSOR)

21 1 IDLE MOTOR H-D 27658-06 (NOT SUPPLIED IN 5221 & 5215) 22 1 TEMP SENSOR H-D 27381-06 (NOT SUPPLIED IN 5221 & 5215)

23 1 CAP, AIR TUBE

24 1 AIR TUBE

25 1 POSITION SENSOR H-D 27689-06 (NOT SUPPLIED IN 5221 & 5215)

26 1 SET SCREW 1/4-20

JIMS FUEL INJECTION ELLIPTICAL MANIFOLDS These JIMS Elliptical manifolds must be used

27 3 SCREW, 8-32 X 1/2” (TEMP & IDLE)

28 1 SCREW, 8-32 X 3/8” 29 1 INSTRUCTION SHEET

5202-IS

with JIMS Throttle Bodies shown on the previous pages. They are available with while supply last or with- out the manifold components. If you currently have a stock throttle body and manifold many of these com- ponents can be transfered to the JIMS manifold and throttle body. To view details of electronics while sup- ply last or other components supplied with manifolds see No. 5202-IS instruction.

PARTS AVAILABLE SEPARATELY

NO. QTY.

DESCRIPTION

PART NO.

1 1

INTAKE MANIFOLD, STOCK MOTOR

5239-1 5239-2

2

1 INTAKE MANIFOLD, TALL MOTOR

3 2 S.E. INJECTOR (NOT SUPPLIED IN 704 & 706) H-D 27654-06 4 1 MAP SENSOR W/ SEAL (NOT SUPPLIED IN 704 & 706) (H-D 32424-98)

5255 5250 5269 1220 5254 5261 5263 5272 5273 5274

5 1 BRACKET, MAP (H-D38723-99)

6

1

SCREW, 8-32 (MAP BRACKET)

7 1 8 1 9 2 10 2 11 2 12 4

FUEL RAIL, ASSEMBLY (NOT SUPPLIED IN 704 & 706 (H-D 27651-06)

O-RING

NUT, 1/4-20 FLANGE NUT, NYLON FLANGE, INTAKE (H-D 27059-05A) SEAL, FLANGE, INTAKE (H-D27035-05) SCREW, 5/16-18 X 3/4”, 12 POINT

13 1 SEAL, MAP SENSOR

11291 5202-IS

14 1

INSTRUCTION SHEET

MANIFOLD WITH ELECTRONIC COMPONENTS

MANIFOLD WITHOUT ELECTRONIC COMPONENTS Part No. Description No. 704 Use on engines with stock cylinder height, or JIMS ® Race Engines 120", 131" & 135”. Will work on stock cylinder length to plus .100" longer cylinders.

Part No.

Description

No. 705

Use on engines with stock cylinder height, or JIMS ® Race Engines 120", 131" & 135”. Will work on stock cylinder length to plus .100" longer cylinders. Use on engines having cylinders longer then plus .125"

No. 707

No. 706

Use on engines having cylinders longer then plus .125"

16