Feuling Catalogue M8 Parts

FEULING ®

MILWAUKEE-EIGHT ® PARTS & KITS

This tool makes for easy removal and installation of the pressure relief spring, by-pass valve and roll pin in the MILWAUKEE-EIGHT oil pump. The tool is used to hold the relief spring down and away from the roll pin. Fits all MILWAUKEE-EIGHT oil pumps. Made in the U.S.A. PRESSURE RELIEF SPRING/VALVE REMOVAL TOOL

PART #9001 RSS #FE-9001

Fits: ‘17-’18 MILWAUKEE-EIGHT Oil Pumps.

REAMER FOR PSI RELIEF VALVE BORE

Engine builders can use this reamer to perform a ‘valve job’ on the pressure relief valve seat of all MILWAUKEE- EIGHT oil pumps and T/C engine camplates. Lightly machine (clean) the relief valve seat and re- seat the plunger valve. Feuling recommends the valve to be seated and sealed from 0-30 psi with a full pop off psi of 55-60 psi.

PART #9008 RSS #FE-9008

Fits: ‘17-’18 MILWAUKEE-EIGHT oil pumps and Twin Cam camplates

Relief Valve PLUNGER

Precision machined hardened steel pressure relief valve makes it easier to seat and seal the valve in MILWAUKEE-EIGHT oil pumps and Twin Cam camplates.

PART #8004 RSS #FE-8004

Fits: ‘17-’18 MILWAUKEE-EIGHT oil pumps and Twin Cam engine camplates

PMS: Process Black RGB: R-0, G-0, B-0 CMYK: C-30 M-30, Y-30, K-100

26 00, K-0

Precision machined hardened steel pressure relief valve makes it easier to seat and seal the valve in MILWAUKEE-EIGHT oil pumps and Twin Cam camplates. RELIEF VALVE PLUNGER/SPRING KIT

um size is 1.75 in. wide. If a smaller logo is required see “Special Useage on second page of this doc.

PART #8007 RSS #FE-8007

M8 oil pump relief valve, spring and roll pin

OXYGEN SENSOR

Feuling 12mm Oxygen Sensor Milwaukee Eight Softail. Black connector 16 OAL, 4 wire. Fits front and rear head pipes.

PART #9910 RSS #FE-9910

Fits: ‘17-’18 MILWAUKEE-EIGHT oil pumps and Twin Cam engine camplates

(07) 3252 5381