Cycle Electric Catalogue

Stators

The unique design of Cycle Electric Inc. stators offer •Insulation able to withstand temperatures of 600° F to eliminate stator burn out •Better low speed output to reduce battery discharge at an idle .•Lower operating temperature for longer service life •Improved plugs that will not swell or separate

It has taken us years of constant upgrading to develop our current line of stators. We start with a higher temperature insulation system capable of withstanding temperatures in excess of 600° F. Others fail at 425° F. This insulation is thinner which allows better heat transfer and better magnetic coupling. We then wind each stator using our precision needle winder. This improves consistency, heat transfer, and magnetic coupling. Better heat transfer means cooler operating temperatures. Better magnetic coupling yields improved output over the entire R.P.M. range. When combined with our top quality plug materials you will not find a stator that can outperform or outlast a Cycle Electric Inc stator. Stator Pin Housings Stators without molded rubber regulator plugs use reusable plug pin housings. These pin housings are not supplied with new replacment stator. On new builds or when changing to a different plug style the pin housing will need to be purchased separately.

CEP-81 used with CE-8188P stator CEP-89 used with CE-8999P stator CEP-02 used with CE-3845-02 stator CEP-60 used with CE-6010/CE-6011/CE-6012/CE-6014/CE-7010/CE-8010-07 CEP-81/CEP-89

CEP-02

CEP-60

Stator Plugs

1

2

3

4

5

6

7

8

9

10

11

12

13

14

8

Made with FlippingBook Online document