Colony Catalog 2024-for email

Pushrod Kits

COMPLETE CONVERSION KITS FEATURING: • AIRCRAFT QUALITY MATERIALS • PRECISION TOLERANCES

• INSTALLATION INSTRUCTIONS • ALL PUSHRODS ARE MANUFACTURED FROM 7/16 O.D. ALUMINUM ALLOY TUBING

Aluminum Alloy Pushrod Kits These lightweight pushrods are manufactured from the best materials obtainable regardless of cost. Aircraft grade aluminum tubing and heat treated steel ends provide maximum durability and long life expectancy. Available for the following: Stock No. 7505-4 Harley Knucklehead 74, 1936-1947 7518-4 Harley Knucklehead 61, 1936-1947 7506-4 Harley Panhead 1948-1952 Using 1966-up Shovelhead Top End 7123-4 Sportster 1957-1985 7122-4 Harley 74, 1948-1952 7519-4 Harley 61, 1948-1952

Aluminum Alloy Tubular Pushrod and Hydraulic Lifter Conversion Kit

The installation of this kit will correct all problems associated with hydrau lic lifters and at the same time substantially reduce valve train weight. Complete conversion kits available for the following: Stock No. 7131-12 Harley Panhead 1953-1965 Stock No. 7132-12 Harley Shovelhead 1966-1983 Stock No. 8603-8 Harley Big Twin Evolution 1984-up

Tappet Screw and Nut Kit Reproduction of tappett screws and locknuts. Stock No. 3253-8 OEM 18554-37 screws and 18570-38 locknuts used on 1957-1985 Sportster. Stock No. 3255-8 OEM 18555-36 screws and 18570-38 locknuts used on 1936-1952 Big Twins.

Replacement Aluminum Pushrods For Use With Hydraulic Lifters These pushrods replace the stock steel rods and still retain the hydrau lic lifters. Stock No. 7515-4 Harley Panhead 1953-1965 Stock No. 7516-4 Harley Shovelhead 1966-1983

Pushrod Tappet Adjuster Locknuts Split locknuts with 9/32-32 thread fit Harley Davidson 1915-1984 Singles, Flatheads, O.H.V. Big Twins, 45’s, Sportster and K models. Replaces OEM 18570-38. Stock No. 8780-4 Parkerized reproduction of 223-15 locknuts used on 1915-1939 Singles, 45”, 74”, 80”, KR. .232” Thick. Colony 8780-4 for the thicker style. Stock No. 3512-4

Hydraulic Lifter Converters Convert 74 hydraulic lifters to solids and still use factory pushrods. Easy and inexpensive way to convert to solid lifters. NOTE: Colony Stock No. 7515-4 or 7516-4 pushrods will work perfectly with these converters. Stock No. 8204-4

Tappet Screw and Nut Kit Bolts are specifically threaded to replace both OEM 221-15 and 221-40A used on 1929-1973 Side Valves and 1952-1953 K models. Complete with nuts. Stock No. 2779-8

58

Phone 800-321-3412 / 330-225-3410 Fax 330-225-9412