8QLYHUVDO 6XSHU&RLOV • High output coils available for 2 and 4 cylinder motorcycles • Available for both points style and electronic ignitions • Kits include mounting brackets and high quality 8.8mm suppression core wire • Get maximum performance for older motorcycles • Available for Harley Davidson and most metric models • Please see note below to determine the appropriate coil for your application
SuperCoil Kits for Harley Davidson®
Primary Resistance Ignition Type Yellow P/N Black P/N
XL, FL, FX
3.0 Ohms 3.0 Ohms
1978-1999 XL, FL, FX except Single fire and Twin Cam
140404 140404K * NOTE: Please test your OEM coils to verify they are within (+/-) 10% of noted ACCEL coil specifications. Using the wrong coil may damage your motorcycle’s electronic ignition module. To determine the ignition type, perform the following test: 1. Determine that the coil you are replacing is a twin tower coil. (These coils will not replace single tower coils). 2. Using a volt meter or 12 volt test light, hook positive lead to position post and negative to ground on one of the stock coils. 3. Turn on ignition but DO NOT engage the starter button. 4. If there are 12 volts at the coil, the motorcycle has inductive type ignition. If there is no voltage at the coil then the motorcycle has a capacitive discharge ignition (CDI) because the power goes to the control box first.