06-14-25-RSS-NP-Cat

Since - 1979

FRESH OUT OF THE CONTAINER

8in. x 1-1/2in. Drag T-Bar Handlebar – Gloss Black

1-1/4in. Beach Bar Handlebar – Chrome

10in. x 1-1/4in. Drag T-Bar Handlebar – Chrome

8in. x 1-1/2in. Drag T-Bar Handlebar – Chrome

The ultimate 1-1/4″ diameter handlebar, designed for maximum comfort * 10″ Rise, 30″ Wide, 5-3/4″ Pullback & Total End Rise 12″ * 1″ Diameter in hand control clamping area * Slotted & Drilled for Internal Wiring.

The ultimate 1-1/4″ diameter handlebar, designed for maximum comfort * 3″ Tall, 35-1/2″ Wide, 15″ Pullback * 1″ Diameter in hand control & riser clamping area, Purchase # WO806 adapter If running 1-1/4″ Clamping Risers. * Slotted & Drilled for Internal Wiring. * Designed for Riser Posts at 3-1/2″ Centres.

* 8″ Tall, 31″ Wide, 8-1/2″ Center Width & 6-1/2″ Pull Back. * Compatable with Throttle-by-Wire or Cable Throttle * Reinforced with hidden 1-1/4″ tubing for superior strength * Use with 1996up OEM hand controls and internal wiring * Rounded inside corners for easier internal wiring

* 8″ Tall, 31″ Wide, 8-1/2″ Center Width & 6-1/2″ Pull Back. * Compatable with Throttle-by-Wire or Cable Throttle * Reinforced with hidden 1-1/4″ tubing for superior strength * Use with 1996up OEM hand controls and internal wiring * Rounded inside corners for easier internal wiring

PART No: LA-W1012-08B

PART No: LA-W1008-00

PART No: LA-W1004-10

PART No: LA-W1012-08

CLICK TO VIEW

CLICK TO VIEW

CLICK TO VIEW

CLICK TO VIEW

6in. x 1-1/2in. Drag T-Bar Handlebar – Chrome

1-1/4in. Beach Bar Handlebar – Gloss Black

1-1/4in. Knuckle Bar Handlebar – Chrome

8in. x 1-1/4in. Drag T-Bar Handlebar – Gloss Black

The ultimate 1-1/4″ diameter handlebar, designed for maximum comfort * 8″ Rise, 30″ Wide, 8-1/4″ Pullback & Total End Rise 9-3/4″ * 1″ Diameter in hand control clamping area * Slotted & Drilled for Internal Wiring. * Risers Posts at 3-1/2″ Centres.

The ultimate 1-1/4″ diameter handlebar, designed for maximum comfort * 3″ Tall, 35-1/2″ Wide, 15″ Pullback * 1″ Diameter in hand control & riser clamping area, Purchase # WO806 adapter If running 1-1/4″ Clamping Risers. * Slotted & Drilled for Internal Wiring.

* 2″ Tall, 36-1/2″ Wide, 8-1/2″ Pullback * 1″ Diameter in hand control & riser clamping area, Purchase # WO806 adapter If running 1-1/4″ Clamping Risers. * Slotted & Drilled for Internal Wiring. * Designed for Riser Posts at 3-1/2″ Centres.

* 6″ Tall, 31″ Wide, 8-1/2″ Center Width & 6″ Pull Back. * Compatable with Throttle-by-Wire or Cable Throttle * Reinforced with hidden 1-1/4″ tubing for superior strength * Use with 1996up OEM hand controls and internal wiring * Rounded inside corners for easier internal wiring

PART No: LA-W1012-06

PART No: LA-W1008-00B

PART No: LA-W1002-00

PART No: LA-W1001-08B

CLICK TO VIEW

CLICK TO VIEW

CLICK TO VIEW

CLICK TO VIEW