05-29-26-RSS-NP-Cat

Since - 1979 FRESH OUT OF THE CONTAINER

TAC-10 Light Cannons Passing Lamp Kit. Engine Guard Mounted Driving Lights – Black. Fits 1-1/4in. Engine Guard Tubing. – Ciro3D The TAC-10® Light Cannons with Vision X Lighting technology feature 10 watt high intensity LEDs that easily connect to your high beam circuit or wire directly to key on power. The 1 1/4″ Round Engine Guard kit includes 1 1/4″ bar mounts for easy installation with extended wiring to place the TAC-10 Lights anywhere along your engine guard!

508 Reaper Chain Drive Camshaft. Fits Milwaukee Eight 2017up. – Feuling

The Grim Reaper Aggressive pulling power with a nasty sound. This camshaft revs up faster than the 521 grind, sounds nastier and pulls harder but is more difficult to tune. The REAPER 508 grind will shine in 114 and larger cubic inch engines with added compression ratio. Ported cylinder heads are not required but will complement the cam and add even more pulling power throughout the range. The stock throttle body produces an excellent powerband and use of a high flow throttle body will increase

PART No: CIR-45019

PART No: FE-1349

CLICK TO VIEW

CLICK TO VIEW

Lifter Cuffs. Fits Milwaukee Eight 2017up – Feuling

OE Plus Oil Pump. Fits Milwaukee-Eight 2017up with Oil Cooled Engine – Feuling

FEULING Lifter cuffs are injection molded Glass-Filled Nylon with Teflon® adder to increase wear and friction resistance. Stronger than factory replacements with added friction reducer. * Developed due to billet lifter cuffs being found to cause debris and harmonics due to rubbing on the lifter flats.

FEULING OE+ stock replacement billet oil pumps deliver increased oil pressure and return scavenge volumes over the factory oil pumps by using larger gerotors and properly sized passages. They will also increase the oil pressure by using a precision machined pressure relief valve which is seated and sealed to a minimum of 30 psi with full pop off at 55-65 psi.

PART No: FE-4030

PART No: FE-7014

CLICK TO VIEW

CLICK TO VIEW